Jump to content
SAU Community

What To Do Before Turbo Upgrade

wayde

By wayde,
in Engines & Forced Induction

 Share

Recommended Posts

wayde Enthusiast

wayde

Posted
Posted

i just want to know what to do before i can upgrade to a high mount turbo. Hopefully keeping stock internals if possible.

Fmic, 3 inch hks exhaust tyrbo back, upgraded suspension and slotted hd brakes. Boost controller, turbo timer, bosch 550 hp fuel pump. I know this car had a 500 hp engine before i got it now has half cut engine new stock turbo and gear box. I think the heads from old engine but not sure.

Cheers

Wayde

Link to comment
https://www.sau.com.au/forums/topic/277192-what-to-do-before-turbo-upgrade/
Share on other sites
ONE-VIA Collaborator

ONE-VIA

Posted
Posted
i just want to know what to do before i can upgrade to a high mount turbo. Hopefully keeping stock internals if possible.

Fmic, 3 inch hks exhaust tyrbo back, upgraded suspension and slotted hd brakes. Boost controller, turbo timer, bosch 550 hp fuel pump. I know this car had a 500 hp engine before i got it now has half cut engine new stock turbo and gear box. I think the heads from old engine but not sure.

Cheers

Wayde

is that what you have or did you just answer your own question

EeLeYe Mentor

EeLeYe

Posted
Posted

Make sure you uprade the AFM with a new turbo. They tend to suck just that tad extra air lol. After my turbo upgrade when I had a PFC, I had to get a Z32 AFM to manage the extra volume of air.

Turbz RB-25 Experienced

Turbz RB-25

Posted
Posted
clutch and diff will need to be done, but depends on power.... there are actually some dipsets out there that will highmount a 200rwkw turbo setup just for looks...

Wrong....

I have 312rwkw my diff is fine. A mate with the exact setup as mine has 364 rwkw and his diff is fine and has lasted 3 years now and still going.

Why would you get an upgraded diff for 200rwkw?

joeyjoejoejuniorshabadoo Grand Master

joeyjoejoejuniorshabadoo

Posted
Posted

ok, so you are going to tell me that a stock diff is as good as a mechanical one for hi-power applications.... :rofl:

looks like every serious race car in the world has just wasted a bunch of money.... what idiots

have you ever driven a car with a mechanical diff? i'd guess not if you think that the stocker is fine for close to 400rwkw

i have the same power level you do and my diff was probably the best non power upgrade i have ever done

Turbz RB-25 Experienced

Turbz RB-25

Posted
Posted
ok, so you are going to tell me that a stock diff is as good as a mechanical one for hi-power applications.... :rofl:

looks like every serious race car in the world has just wasted a bunch of money.... what idiots

have you ever driven a car with a mechanical diff? i'd guess not if you think that the stocker is fine for close to 400rwkw

i have the same power level you do and my diff was probably the best non power upgrade i have ever done

200rwkw is hardly a "high power application".

Don't go off tangents.

The person on this thread asked "what should I do prior to upgrading my turbo?"

At around 200rwkw (what a stock turbo is usually capable of pulling reasonabley safely), it WOULD be a waste of money to upgrade the diff. Standard diff is more than sufficient to support 200rwkw.... :D

Unless you can prove otherwise?

joeyjoejoejuniorshabadoo Grand Master

joeyjoejoejuniorshabadoo

Posted
Posted
Wrong....

I have 312rwkw my diff is fine. A mate with the exact setup as mine has 364 rwkw and his diff is fine and has lasted 3 years now and still going.

Why would you get an upgraded diff for 200rwkw?

no to mention... if you actually READ my post you'd realise that i said the clutch and diff will need to be done depending on power level.....

the turbo is not mentioned, thus the power is at this point an unknown quantity... and at no point did i say a diff was needed for 200rwkw

what i said was that some people are stupid enough to highmount a 20rwkw setup for looks only....

also fwiw i personally would definately get a diff/weldy for 200rwkw... my rolla is currently having a 150rwkw build and it already has a welded diff

joeyjoejoejuniorshabadoo Grand Master

joeyjoejoejuniorshabadoo

Posted
Posted

and a diff is never a waste of money... a weldy can be had for virtually nothing.

with the 4ac in my rolla putting out an epic 40rwkw you can STILL notice the difference with a locked diff

mad082 Grand Master

mad082

Posted
Posted
If you read his first post, you will notice he has the stock turbo on it............ :rofl:

so the point of this thread is what should he do before he upgrades his turbo to a stock on is it?

LOL

back on topic,

clutch

injectors

ecu

AFM

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Turn signal wiring question

      By MBS206 · Posted

      I started with the above in my head too, and I might be reading / thinking about what they want wrong, which is why I complicated it a bit further. Purpose I'm seeing is for the corner indicator to be on with headlights, and then if the indicator turns on it can still flash. The relay part above I can see working as required, except in the case of headlight is on, and indicator is on. The change over relay you've wired in would get signal from the indicator, and as it flashes would give power to the globe from the indicator, but as it flashes off, power comes from the headlight, which would cause the indicator to be constantly on when headlight is on, even while indicator change over is flashing. That is unless we don't care if it flashes or not if the headlight is on? I guess that's an OP clarification.
    • VicFlo
      Speedo and odometer reading super slow r34gtt a/t

      By VicFlo · Posted

      HI, Ive got an r34 gtt sedan A/T. The instrument cluster went out and I replaced it with another A/T everything visually looks the same and all the gauges work now with the exception of the speedometer and odometer. The speedo will stay pinned at zero until I'm going about 55kmh and then it'll say Im going about 5kmh. my odometer seems to be tracking at about a 1/10 of what it should. If I go 1km it'll say I've only gone 0.01. Appreciate any and all help. Ive tried searching through the forums reddit and a local fb group. The only info I think I've found is that some cars didnt come equipped with TCS (mind is) and the clusters may be different between those? I've also installed a brand new VSS and no joy obviously. TIA. 
    • VicFlo
      R34 manual conversion wiring

      By VicFlo · Posted

      what speedo healer did you use?  
    • Duncan
      ugently need expert / experienced opinion

      By Duncan · Posted

      Certainly. It is probably broken under the wire style clamp. At least that one is easier to get at than the front one.   Sounds like it isn't a major leak, I'd start with backing off the the water feed and return banjos into the turbos half a turn then tightening properly. Hardlines can still crack over time, either in the tube (particularly when turbos are changed if the banjo is siezed in the the tube) or at the brazed joins between the lines and the banjo fittings. A coolant system pressure test will reveal all. BTW you'd be able to get a sump without exchange, it will just cost more as they will have to source another stock one for the next customer. If you want to address the sump a much better option is something like this https://www.hioctanedirect.com/hi-octane-racing-sump-extension-nissan-rb26 that you weld in locally (and add the oil return fittings at the same time)
    • Duncan
      Fourth gear grind

      By Duncan · Posted

      Pretty sure you are thinking of the throwout bearing there (which you should change when you change your clutch), when they are worn they will get quieter if you put your foot on the clutch. An input shaft bearing is turning/noisy at all times.
×
×
  • Create New...