Jump to content
SAU Community

Recommended Posts

I have a full set of for Rays Gram Light 57F Pro for sale.

Colour: Noble Gold with Titanium Lip

Size: 18x10 + 20 Offset Approx:70mm of Dish

Accessories: Comes with no tyres or centre caps. Two Rays valve caps are missing, stolen buy punk kids.

Condition: There is no gutter rash on any of them, one rim has a small dint from when i bought them got damaged in the post (really ticked off about), which is barely visable when tyre is on. The other has a small scratch from a stone chip, but otherwise in very good condition.

They look very nice, great for a show car, tires are still on them but can be removed straight away. The wheels where always washed with rain water and kept clean. Selling because they are too beautiful to use on a track car and need the money to finish off the rest of car. Any buyers are welcome to inspect, will post anywhere at buyers expense.

Contact: Ben on 0423481630 or [email protected]

Location: Mackay QLD

Price: $3200 cost me well over $4000 special order have done approx 7000km's

post-56933-1246499115_thumb.jpg

post-56933-1246499140_thumb.jpg

post-56933-1246499190_thumb.jpg

post-56933-1246499214_thumb.jpg

post-56933-1246499237_thumb.jpg

post-56933-1246499351_thumb.jpg

hey mate i like your rear bar

is it carbon fibre? whered u pick it up?

Hi

Yeah its a carbon fibre diffuser made by ABFLUG, bolts straight onto standard rear bumper. Bought it off RHD Japan bout 2yrs ago for about $1600, that was when the yen was 107 to the Aussie Dollar, probably over $2000 now.

I have a full set of for Rays Gram Light 57F Pro for sale.

Colour: Noble Gold with Titanium Lip

Size: 18x10 + 20 Offset Approx:70mm of Dish

Accessories: Comes with no tyres or centre caps. Two Rays valve caps are missing, stolen buy punk kids.

Condition: There is no gutter rash on any of them, one rim has a small dint from when i bought them got damaged in the post (really ticked off about), which is barely visable when tyre is on. The other has a small scratch from a stone chip, but otherwise in very good condition.

They look very nice, great for a show car, tires are still on them but can be removed straight away. The wheels where always washed with rain water and kept clean. Selling because they are too beautiful to use on a track car and need the money to finish off the rest of car. Any buyers are welcome to inspect, will post anywhere at buyers expense.

Contact: Ben on 0423481630 or [email protected]

Location: Mackay QLD

Price: $3200 cost me well over $4000 special order have done approx 7000km's

BUMP $3000

  • 1 year later...
Fit under stock S15 guards without rolling them?

probably not. these are way too wide. a roll will help though but you'll probably need to flare/pump the guard to get em under. do it. will look sexy

probably not. these are way too wide. a roll will help though but you'll probably need to flare/pump the guard to get em under. do it. will look sexy

(using my brother's login to reply)

Haha I know they will, which is why I am buying a wide body kit and already have a set but without the titanium lip. Although I have been told the front two will never fit under my guards which is why I am selling 2 D:

(using my brother's login to reply)

Haha I know they will, which is why I am buying a wide body kit and already have a set but without the titanium lip. Although I have been told the front two will never fit under my guards which is why I am selling 2 D:

yeah fitting 10inch rims on the front of a silvia would be very hard considering the offset

  • 9 months later...

Bump

I am putting these up for sale again $3000 with tires they have brand new Rays Centre Caps and Rays Valve Caps, need them gone asap as the car is getting turned into time attack car and i want to buy a set of TE37 SL for track racing. Will post updated pics up later this arvo.

  • 5 months later...

hey man off topic i saw your r32 in performance imports, f**kEN PORN!!!! love ya work fellas. what to have a look myself when i come through mackay might bring my 4door awd r32 in for some fun with ya's.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • My plan is to go the pink option. But still add the 4th fitting near the oil cap and just cap it off for now.  That way I can add 2 extra to the sump and have 4 dedicated breathers/drains if I ever remove the sump for any reason. 
    • Oh, yeah, look - here's the thing. You always replace the tensioner when you're going in there to replace a belt....under normal circumstances. You want to make sure it is good and safe, and that you don't create a reason to take the front of the bloody motor apart again. But in this case, OP is replacing a belt that has aged out on time, not usage. The belt is a million miles away from aging out on usage. The belt gets a time "limit" merely because it is made of rubber and can degrade naturally. The tensioner? Not so much. I reckon it could last forever on the current usage pattern. So I reckon if the thing is going to continue to get used at the same rate, replacing the tensioner is somewhat gratuitous. Would I replace it if I was doing it on my car right now? Hell yes. Because my car does 10-20 thousand kays a year. So it's all going to be the same thrashedness. Would I YOLO it on OP's car. More than likely.
    • I dunno. I think any one of those from each side to sump is probably enough. Remember - this is about creating a path for gas flow up from the sump to the cam covers. That gas flow then has to leave via the lines to the catch can. There's probably little point in providing 100% more capacity from sump up to covers cf. what you have from there to the catch can. Put in the 3 convenient ones? Any which way that you see fit. That'd be my thoughts.
    • Getting holes drilled into to cam covers and AN10 fitting welded on. My sump has 2x AN10 fittings on it already. These are the options I have come up with that can be done without needing to remove the sump to add more fittings. In all options front of passenger side cover connects to VCT head drain bung (i know this isn't the best spot but my feeling is it must do something). Option 1 (pink). The back of each cam covers gets its own line to sump. Option 2 (blue). The back of each cam covers are linked and share a line to sump. The front of drivers side gets its own line. Option 3 (Black). Drivers side are Tee'd together and share a line to the sump. Passenger side rear gets its one line to the sump.
    • I'd be surprised if Nissan doesn't mention it in the manual as it seems unlikely that a tensioner is going to last 200,000km.
×
×
  • Create New...