Jump to content
SAU Community

Recommended Posts

Hi there!

My name's Glenn and I'm pretty new to the forum, been lurking a couple of weeks though...

I recently bought a nice M35 Stagea from QLD and drove it down to Canberra for registration. While it was going over the pits at Dickson Motor Registry the technicians needed to know the weight of the carm which I couldn't find in any of my paperwork. They joked with me that the car probably weighed about 2000kg... I then remembered and told them that the SEVS register has them listed at 1680kg. Anyway they said to save me time going to a weigh bridge they'd just look up the VIN online. So the guy came back a few minutes later and said it was listed as 1965kg!!! I thought he was pulling my leg but then he showed me the printout from the web. However while they were doing the brake testing, the car registered 1765kg on the machine, with me in it. They didn't seem to care though, and I guess I shouldn't too much as it's not costing me any extra for rego.

I am interested though to find out how this could happen? It just seems pretty weird. :bunny:

I've tried using the VIN search on the DOTARS website but it says there's no records found?

Has anyone else had this oversight when registering their imports?

Glenn

Link to comment
https://www.sau.com.au/forums/topic/277477-m35-tare-weight/
Share on other sites

Just looking through my Hyper Rev #67 and it lists two different weights for M35's.

The first is gross weight, but I do not know what the second is as I cannot (yet) read Japanese (adds 275kg to gross weight).

I also decided to throw in the stock tyre sizes for each model so everyone can figure out the best wheel/tyre size when upgrading to keep their speedo as accurate as possible.

250RSV - 1560/1835kg (GH-M35) wheel/tyre size - 215/55/17 93V

250RS - 1550/1825kg (GH-M35) wheel/tyre size - 205/65/16 95S

250tRS Four V - 1680/1955kg (GH-NM35) wheel/tyre size - 215/55/17 93V

250RS Four - 1650/1925kg (GH-NM35) wheel/tyre size - 215/55/17 93V

300RX - 1590/1865kg (GH-HM35) wheel/tyre size - 215/55/17 93V

250RX - 1560/1835kg (GH-M35) wheel/tyre size - 205/65/16 95S

250t RX Four - 1680/1955kg (GH-NM35) wheel/tyre size - 215/55/17 93V

250RX Four - 1660/1935kg (GH-NM35) wheel/tyre size - 205/65/16 95S

AR-X Four - 1720/1995kg (GH-NM35) wheel/tyre size - 225/55/18 97H

Edited by iamhe77
Link to comment
https://www.sau.com.au/forums/topic/277477-m35-tare-weight/#findComment-4692902
Share on other sites

Ah so it seems that they've managed to go off of the second figure for some reason.

I wonder what would weigh 275kg? 4 passengers + a tank of fuel?

Well at least it's nice to know that it wasn't just some arbitrary number or a typo, maybe.

Link to comment
https://www.sau.com.au/forums/topic/277477-m35-tare-weight/#findComment-4694174
Share on other sites

factory weight is generally without anything, no oil, water, spare tyre etc

if its 'wet' it has all fluids, and pretty much as it would be driving on the road (not sure if they include a full tank), on oz when they are imported, they chuck them on the weighbridge, the driver stays in, all his crap etc stays in blah blah. wheels can make a difference too, plus 80L fuel=~80Kg.........

Link to comment
https://www.sau.com.au/forums/topic/277477-m35-tare-weight/#findComment-4694200
Share on other sites

The GVM (Gross Vehicle Mass) includes the full compliment of passengers. fuel and luggage. It used for determining the most the car will weigh for things like the tyre loading.

Cheers

Gary

:)

Fair enough, but I can't imagine that 5 adults, 80L of fuel and a fully packed wagon would only increase weight by 275kg.

I mean, I know the average Japanese adult is lighter than the average Australian adult, but still!

Link to comment
https://www.sau.com.au/forums/topic/277477-m35-tare-weight/#findComment-4694320
Share on other sites

I was working out weight distribution / corner weighting on my track car a while ago and if you want to work out wet kerb weight you'll find that the Specific gravity of gasoline is 0.739, so that means that a litre of gas = 0.739Kg, so it's 25% lighter than a litre of water. So on a full 80L M35 tank you'd be looking at 59Kg

Link to comment
https://www.sau.com.au/forums/topic/277477-m35-tare-weight/#findComment-4697740
Share on other sites

The GVM (Gross Vehicle Mass) includes the full compliment of passengers. fuel and luggage. It used for determining the most the car will weigh for things like the tyre loading.

Cheers

Gary

1825 GVM listed on my NZ ownership papers, very interesting on a technical note that they list the GVM for a car instead of its actual kerb/tare weight. Legally for trucks exceeding the GVM (usually 65tonne for a truck that operates at say 44 tonne legal max in NZ) is a seperate offence from being overloaded as well (you have to be overloaded to exceed a GVM). Another legal trap fro the unwary ???? Five fat people in stagea with boot full of gear and full tank???

Link to comment
https://www.sau.com.au/forums/topic/277477-m35-tare-weight/#findComment-4702655
Share on other sites

:pirate:

Fair enough, but I can't imagine that 5 adults, 80L of fuel and a fully packed wagon would only increase weight by 275kg.

I mean, I know the average Japanese adult is lighter than the average Australian adult, but still!

From memory Nissan do their base weight with a full tank of fuel and the driver. So the 275 kgs increase to GVM is for 4 passengers and luggage, say 60 kgs each plus say 35 kgs of luggage.

Cheers

Gary

Link to comment
https://www.sau.com.au/forums/topic/277477-m35-tare-weight/#findComment-4702863
Share on other sites

From memory Nissan do their base weight with a full tank of fuel and the driver. So the 275 kgs increase to GVM is for 4 passengers and luggage, say 60 kgs each plus say 35 kgs of luggage.

Cheers

Gary

LOL at 60kg... unless you are talking all female passengers :pirate:

Edited by iamhe77
Link to comment
https://www.sau.com.au/forums/topic/277477-m35-tare-weight/#findComment-4703035
Share on other sites

Vic Roads just made it up....

When he came to that part of the form, he looked around, had a bit of a think, and just wrote 1,550. "It can't weigh as much as a Falcon...."

So does this mean that I have the lightest AR-X in Australia?

Link to comment
https://www.sau.com.au/forums/topic/277477-m35-tare-weight/#findComment-4713887
Share on other sites

Maybe it was full of helium?

Cant weigh as much as a falcon lol. Actually I think the new falcons are a bit heavier (same with new commodores) but all stageas are heavier than pre-2006? falcons.

There's only ~20-30 kg difference between s1/s2 stageas and the M35 too.

Link to comment
https://www.sau.com.au/forums/topic/277477-m35-tare-weight/#findComment-4715730
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes...but look at the numbers. There is a tiny tiny fraction of the number of Joules available, compared to what is used/needed. Just because things are "possible" doesn't make them meaningful.
    • Thanks for taking the time to post that ! If anything changes or happens please do update us. 
    • Somehow Vertimass/Oak Ridge National Labs has figured out a catalyst that can convert ethanol into C9-C10 hydrocarbons in basically a single step without ending up with a bunch of ethylene or similar waste products: https://patents.google.com/patent/WO2023224867A1/en I still don't think anything like this will keep us from needing to transition to EVs regardless along with all kinds of other electrification, but things like this will go a long way towards alleviating the problem of how to electrify things like planes. Renewable diesel is seemingly an easier problem as well, Chevron is already running refineries for the stuff and the primary feedstock is tallow and other waste fats from agriculture.
    • Ok so I have sorted everything with my uniclutch and  i can offer up a bit of feedback and some things that might help others.    I found problems with factory damper line. Weird shit and had trouble with peddle adjustment    I used this https://au.gktech.com/products/r33-gts-t-skyline-braided-clutch-line?_pos=2&_sid=22b01b9b9&_ss=r Also when adjusting peddle leave a bit of play. You can get into a over stroke condition easy.. Make sure you can push the slave forward after adjusting to confirm fluid can return to master then you will need to pump it up heaps…..not sure why but that’s how it is.    last thing the splined adapter is machined perfectly. If your input shaft is old like mine was I would put a bit of valve grinding paste on it and stroke it like a 15 year old. Just to give it a tad more clearance and to better match it to the spline.    reason is on a near flat shift I have had situation where the peddle returns a millisecond after you lift from the clutch. No slip or anything but I reckon this is due to tolerance on the spline being way tighter than stock clutch and binding for a sec. I think this will go away but also my spline was old. Box is old so I guess I should have checked better. It’s a super neat fit.    it feels light as and holds awesome without any noise    
    • My Fuga Hybrid is JDM, 2014 model but very similar to the V37 from the looks of things..same platform just physically larger and very comfortab;e
×
×
  • Create New...