Jump to content
SAU Community

The Unplanned, Unexpected Garage Sale


Recommended Posts

Hi all, priorities have recently all changed. Recent house purchase and now a little one one the way, means i have to turn a lot of my toys back into coin. This stuff has taken me many years to acquire and items are in excellent condition. No Lowballing please. I will not reply to these. Please PM me if you are interested. There will be a few bits and pieces to be added later, but here is the bulk of it. Parts are in Gold coast and brisbane. Small items can be sent post or picked up. Larger items we can discuss. but all freight to be paid by buyer.

ELECTRICAL

Splitfire Coilpacks Suit RB26 - Used for 3 month $450

Defi gauges - White face (COMPLETE MATCHING SET) 4.5" tacho $350

60mm Water temp $230

60mm oil temp $230

60mm fuel pressure $230

60mm oil pressure $230

60mm boost $200

All with stands, wiring, sensors and control box $1350 for the lot or will seperate.

2 x Nissan AFM's, RB series with green label comes with HKS air filter (green filters) $250 for the pair

FUEL INJECTORS

SARD 1000cc Top Feed Injectors, cleaned and flow tested. These will flow 1200cc at 60psi of fuel pressure!! $800 (brand new these are $280 per injector!)

Apexi 600cc Top Feed Injectors, cleaned and flow tested. $600

TURBOS/MANIFOLDS/WASTEGATES

T04Z Turbo kit includes Garrett T04Z turbo (0.82 split pulse rear V-Band) Turbo comes with feed line and drain. $1500

6Boost high mount split pulse Manifold $700

ENGINES

FORGED RB30/26 4WD!!

RB30 Block – extensively prepped, drilled to suit bigger head studs, bearing caps grooved etc

RB30 Crank

King Bearings – brand new

Spool Rods

CP Pistons with brand new rings

ARP main Stud

Custom RB26 sump adaptor plate with CHROME MOLY main caps

ARP Head Studs RB26 size, block is drilled and tapped to suit

Tomei Metal Head Gasket

Tomei Oil Pump & Collar

R32 GTR Head

Extensive Porting

270/270 10.8mm Lift Tomei Profile camshafts

+1mm Stainless one piece valves on Inlet & Exhaust

BC Valve Springs and Titanium Retainer kit

Painted RB26 Covers with -12 weld-ons

Gates Timing Belt

N1 water pump

Rb26 Sump (larger one can be supplied if needed)

All machining and assembly complete

$13000

STANDARD RB26DETT ENGINE - Comes with the following parts

complete inlet side including plenum, TB's, fuel rail & inj's

Complete set of covers

Cam angle sensor

turbos, manifolds, std dumps

standard flywheel

coilpacks and coilpack loom

$2900

DRIVETRAIN

PPG Straight cut gearset (1st-5th), fully rebuilt and reconditioned with new dog gears, PPG billet selectors, upgraded input shaft (Hollinger Spline). Comes complete with NPC twin plate clutch to suit, bearing carrier and everything required for it to be complete bolt in item. $8500

INTAKE

Hypertune 90mm Plenum and Hypertune Throttle Body $2500

COOLING

GREDDY Alloy Radiator R32 GTR $950

MISC

Safety 21 (pretty sure that is the brand) R32 GTR Half Cage (bolt in) with bolt in side intrusion bars. Bars are 40mm diameter. $750 comes complete with all plates and bolts.

Large Oil Cooler -10 fittings $150

WHEELS AND TYRES

Starcorp Wheels 18x9.5 & 18x8.5" rims only $800

R33 GTR Wheels rims only $900

Koya Racetech 18x9" Wheels (4 X) Black centre, polished lip Fitted with brand new 265/35R18 Federal 595 SS tyres $1000

Koya Racetech 18x8" Wheels (2 X) Black centre, polished lip Fitted with brand new 235/40R18 Federal 595 SS tyres $500

Edited by GTRHOLIC
Link to comment
Share on other sites

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Hi all, priorities have recently all changed. Recent house purchase and now a little one one the way, means i have to turn a lot of my toys back into coin. This stuff has taken me many years to acquire and items are in excellent condition. No Lowballing please. I will not reply to these. Please PM me if you are interested. There will be a few bits and pieces to be added later, but here is the bulk of it. Parts are in Gold coast and brisbane. Small items can be sent post or picked up. Larger items we can discuss. but all freight to be paid by buyer.

ELECTRICAL

Splitfire Coilpacks Suit RB26 - Used for 3 month $450

Defi gauges - White face (COMPLETE MATCHING SET) 4.5" tacho $350

60mm Water temp $230

60mm oil temp $230

60mm fuel pressure $230

60mm oil pressure $230

60mm boost $200

All with stands, wiring, sensors and control box $1350 for the lot or will seperate.

2 x Nissan AFM's, RB series with green label comes with HKS air filter (green filters) $250 for the pair

FUEL INJECTORS

SARD 1000cc Top Feed Injectors, cleaned and flow tested. These will flow 1200cc at 60psi of fuel pressure!! $800 (brand new these are $280 per injector!)

Apexi 600cc Top Feed Injectors, cleaned and flow tested. $600

TURBOS/MANIFOLDS/WASTEGATES

T04Z Turbo kit includes Garrett T04Z turbo (0.82 split pulse rear V-Band) Turbo comes with feed line and drain. $1500

6Boost high mount split pulse Manifold $700

ENGINES

FORGED RB30/26 4WD!!

RB30 Block – extensively prepped, drilled to suit bigger head studs, bearing caps grooved etc

RB30 Crank

King Bearings – brand new

Spool Rods

CP Pistons with brand new rings

ARP main Stud

Custom RB26 sump adaptor plate with CHROME MOLY main caps

ARP Head Studs RB26 size, block is drilled and tapped to suit

Tomei Metal Head Gasket

Tomei Oil Pump & Collar

R32 GTR Head

Extensive Porting

270/270 10.8mm Lift Tomei Profile camshafts

+1mm Stainless one piece valves on Inlet & Exhaust

BC Valve Springs and Titanium Retainer kit

Painted RB26 Covers with -12 weld-ons

Gates Timing Belt

N1 water pump

Rb26 Sump (larger one can be supplied if needed)

All machining and assembly complete

$13000

STANDARD RB26DETT ENGINE - Comes with the following parts

complete inlet side including plenum, TB's, fuel rail & inj's

Complete set of covers

Cam angle sensor

turbos, manifolds, std dumps

standard flywheel

coilpacks and coilpack loom

$2900

DRIVETRAIN

PPG Straight cut gearset (1st-5th), fully rebuilt and reconditioned with new dog gears, PPG billet selectors, upgraded input shaft (Hollinger Spline). Comes complete with NPC twin plate clutch to suit, bearing carrier and everything required for it to be complete bolt in item. $8500

INTAKE

Hypertune 90mm Plenum and Hypertune Throttle Body $2500

COOLING

GREDDY Alloy Radiator R32 GTR $950

MISC

Safety 21 (pretty sure that is the brand) R32 GTR Half Cage (bolt in) with bolt in side intrusion bars. Bars are 40mm diameter. $750 comes complete with all plates and bolts.

Large Oil Cooler -10 fittings $150

WHEELS AND TYRES

Starcorp Wheels 18x9.5 & 18x8.5" rims only $800

R33 GTR Wheels rims only $900

Koya Racetech 18x9" Wheels (4 X) Black centre, polished lip Fitted with brand new 265/35R18 Federal 595 SS tyres $1000

Koya Racetech 18x8" Wheels (2 X) Black centre, polished lip Fitted with brand new 235/40R18 Federal 595 SS tyres $500

standard engine sold.

Link to comment
Share on other sites

ELECTRICAL

Splitfire Coilpacks Suit RB26 - Used for 3 month $450

Defi gauges - White face (COMPLETE MATCHING SET) 4.5" tacho $350

60mm Water temp $230

60mm oil temp $230

60mm fuel pressure $230

60mm oil pressure $230

60mm boost $200

All with stands, wiring, sensors and control box $1350 for the lot or will seperate.

2 x Nissan AFM's, RB series with green label comes with HKS air filter (green filters) $250 for the pair

FUEL INJECTORS

SARD 1000cc Top Feed Injectors, cleaned and flow tested. These will flow 1200cc at 60psi of fuel pressure!! $800 (brand new these are $280 per injector!)

Apexi 600cc Top Feed Injectors, cleaned and flow tested. $600

TURBOS/MANIFOLDS/WASTEGATES

T04Z Turbo kit includes Garrett T04Z turbo (0.82 split pulse rear V-Band) Turbo comes with feed line and drain. $1500

6Boost high mount split pulse Manifold $700

ENGINES

FORGED RB30/26 4WD!!

RB30 Block – extensively prepped, drilled to suit bigger head studs, bearing caps grooved etc

RB30 Crank

King Bearings – brand new

Spool Rods

CP Pistons with brand new rings

ARP main Stud

Custom RB26 sump adaptor plate with CHROME MOLY main caps

ARP Head Studs RB26 size, block is drilled and tapped to suit

Tomei Metal Head Gasket

Tomei Oil Pump & Collar

R32 GTR Head

Extensive Porting

270/270 10.8mm Lift Tomei Profile camshafts

+1mm Stainless one piece valves on Inlet & Exhaust

BC Valve Springs and Titanium Retainer kit

Painted RB26 Covers with -12 weld-ons

Gates Timing Belt

N1 water pump

Rb26 Sump (larger one can be supplied if needed)

All machining and assembly complete

$13000

STANDARD RB26DETT ENGINE - Comes with the following parts

complete inlet side including plenum, TB's, fuel rail & inj's

Complete set of covers

Cam angle sensor

turbos, manifolds, std dumps

standard flywheel

coilpacks and coilpack loom

$2900

DRIVETRAIN

PPG Straight cut gearset (1st-5th), fully rebuilt and reconditioned with new dog gears, PPG billet selectors, upgraded input shaft (Hollinger Spline). Comes complete with NPC twin plate clutch to suit, bearing carrier and everything required for it to be complete bolt in item. $8500

INTAKE

Hypertune 90mm Plenum and Hypertune Throttle Body $2500

COOLING

GREDDY Alloy Radiator R32 GTR $950

MISC

Safety 21 (pretty sure that is the brand) R32 GTR Half Cage (bolt in) with bolt in side intrusion bars. Bars are 40mm diameter. $750 comes complete with all plates and bolts.

Large Oil Cooler -10 fittings $150

WHEELS AND TYRES

Starcorp Wheels 18x9.5 & 18x8.5" rims only $800

R33 GTR Wheels rims only $900

Koya Racetech 18x9" Wheels (4 X) Black centre, polished lip Fitted with brand new 265/35R18 Federal 595 SS tyres $1000

Koya Racetech 18x8" Wheels (2 X) Black centre, polished lip Fitted with brand new 235/40R18 Federal 595 SS tyres $500

updated list, r33 gtr wheels have been sold. Splitfires and apexi injectors have been sold.

Edited by GTRHOLIC
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • That's the most absurd thing I've ever heard. I would go cut bellhousing over that monstrosity of a flywheel all day, every day. It puts a lot more mass further from the last main bearing. I've had nothing but problems with Collins in the past and refuse to ever buy their products again. I would not trust anything they tell you. He's playing his salesman card.  I'm currently at 640whp on a mustang dyno (~770bhp) with the intentions of running E85 and a lot more power this upcoming spring. Cheers, 
    • Nah, it's not the reduced knock margin. It is a direct mechanical effect of having to initiate the combustion earlier, while the piston is still rising, which starts to exert combustion pressure on the rising piston earlier, making the rest of the engine work harder to finish driving the piston up to TDC where the combustion pressure stops being a negative and starts being a positive. Your modern engine that only needs ~10° to make MBT doesn't waste the other 10 or so degrees of crank rotation. That's almost all of it. The difference in knock margin might go either way. Remember that modern engines to which you are currently comparing the long tractor engine (the RB) are now running super high compression, direct injection, tricky cam control and maybe even cylinder pressure sensors. You're not comparing apples with other fruit. It's apples and sea weed, or some other evolutionarily primitive vegetation. And remember, squish only really comes into play at the very end of the stroke. It certainly does good things, but it is not the biggest contributor to what's going on. It is quite possibly much less important in 4 valve head than 2 valvers also, because there is so much less squish available to a 4 valve anyway.
    • Food for thought, a longer stroke motor would need less ignition timing vs. a shorter stroke motor requiring more ignition timing.
    • Thanks Duncan, HART is only 10 mins from me (I did my bike license there), it'd be awesome if it ran these types of things.  Sutton Road does look good and they take fewer cars than SMSP which is good.  Surely you have enough land to lay a few million tonnes of concrete and some sprinklers D? 
    • I thought an engine that needs more ignition timing to make power is going to result in less power due to reduced knock margin? More time for the combustion to propagate -> more time for it to heat up the rest of the mix to detonation.
×
×
  • Create New...