Jump to content
SAU Community

Recommended Posts

Hi all, priorities have recently all changed. Recent house purchase and now a little one one the way, means i have to turn a lot of my toys back into coin. This stuff has taken me many years to acquire and items are in excellent condition. No Lowballing please. I will not reply to these. Please PM me if you are interested. There will be a few bits and pieces to be added later, but here is the bulk of it. Parts are in Gold coast and brisbane. Small items can be sent post or picked up. Larger items we can discuss. but all freight to be paid by buyer.

ELECTRICAL

Splitfire Coilpacks Suit RB26 - Used for 3 month $450

Defi gauges - White face (COMPLETE MATCHING SET) 4.5" tacho $350

60mm Water temp $230

60mm oil temp $230

60mm fuel pressure $230

60mm oil pressure $230

60mm boost $200

All with stands, wiring, sensors and control box $1350 for the lot or will seperate.

2 x Nissan AFM's, RB series with green label comes with HKS air filter (green filters) $250 for the pair

FUEL INJECTORS

SARD 1000cc Top Feed Injectors, cleaned and flow tested. These will flow 1200cc at 60psi of fuel pressure!! $800 (brand new these are $280 per injector!)

Apexi 600cc Top Feed Injectors, cleaned and flow tested. $600

TURBOS/MANIFOLDS/WASTEGATES

T04Z Turbo kit includes Garrett T04Z turbo (0.82 split pulse rear V-Band) Turbo comes with feed line and drain. $1500

6Boost high mount split pulse Manifold $700

ENGINES

FORGED RB30/26 4WD!!

RB30 Block – extensively prepped, drilled to suit bigger head studs, bearing caps grooved etc

RB30 Crank

King Bearings – brand new

Spool Rods

CP Pistons with brand new rings

ARP main Stud

Custom RB26 sump adaptor plate with CHROME MOLY main caps

ARP Head Studs RB26 size, block is drilled and tapped to suit

Tomei Metal Head Gasket

Tomei Oil Pump & Collar

R32 GTR Head

Extensive Porting

270/270 10.8mm Lift Tomei Profile camshafts

+1mm Stainless one piece valves on Inlet & Exhaust

BC Valve Springs and Titanium Retainer kit

Painted RB26 Covers with -12 weld-ons

Gates Timing Belt

N1 water pump

Rb26 Sump (larger one can be supplied if needed)

All machining and assembly complete

$13000

STANDARD RB26DETT ENGINE - Comes with the following parts

complete inlet side including plenum, TB's, fuel rail & inj's

Complete set of covers

Cam angle sensor

turbos, manifolds, std dumps

standard flywheel

coilpacks and coilpack loom

$2900

DRIVETRAIN

PPG Straight cut gearset (1st-5th), fully rebuilt and reconditioned with new dog gears, PPG billet selectors, upgraded input shaft (Hollinger Spline). Comes complete with NPC twin plate clutch to suit, bearing carrier and everything required for it to be complete bolt in item. $8500

INTAKE

Hypertune 90mm Plenum and Hypertune Throttle Body $2500

COOLING

GREDDY Alloy Radiator R32 GTR $950

MISC

Safety 21 (pretty sure that is the brand) R32 GTR Half Cage (bolt in) with bolt in side intrusion bars. Bars are 40mm diameter. $750 comes complete with all plates and bolts.

Large Oil Cooler -10 fittings $150

WHEELS AND TYRES

Starcorp Wheels 18x9.5 & 18x8.5" rims only $800

R33 GTR Wheels rims only $900

Koya Racetech 18x9" Wheels (4 X) Black centre, polished lip Fitted with brand new 265/35R18 Federal 595 SS tyres $1000

Koya Racetech 18x8" Wheels (2 X) Black centre, polished lip Fitted with brand new 235/40R18 Federal 595 SS tyres $500

Edited by GTRHOLIC
  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Hi all, priorities have recently all changed. Recent house purchase and now a little one one the way, means i have to turn a lot of my toys back into coin. This stuff has taken me many years to acquire and items are in excellent condition. No Lowballing please. I will not reply to these. Please PM me if you are interested. There will be a few bits and pieces to be added later, but here is the bulk of it. Parts are in Gold coast and brisbane. Small items can be sent post or picked up. Larger items we can discuss. but all freight to be paid by buyer.

ELECTRICAL

Splitfire Coilpacks Suit RB26 - Used for 3 month $450

Defi gauges - White face (COMPLETE MATCHING SET) 4.5" tacho $350

60mm Water temp $230

60mm oil temp $230

60mm fuel pressure $230

60mm oil pressure $230

60mm boost $200

All with stands, wiring, sensors and control box $1350 for the lot or will seperate.

2 x Nissan AFM's, RB series with green label comes with HKS air filter (green filters) $250 for the pair

FUEL INJECTORS

SARD 1000cc Top Feed Injectors, cleaned and flow tested. These will flow 1200cc at 60psi of fuel pressure!! $800 (brand new these are $280 per injector!)

Apexi 600cc Top Feed Injectors, cleaned and flow tested. $600

TURBOS/MANIFOLDS/WASTEGATES

T04Z Turbo kit includes Garrett T04Z turbo (0.82 split pulse rear V-Band) Turbo comes with feed line and drain. $1500

6Boost high mount split pulse Manifold $700

ENGINES

FORGED RB30/26 4WD!!

RB30 Block – extensively prepped, drilled to suit bigger head studs, bearing caps grooved etc

RB30 Crank

King Bearings – brand new

Spool Rods

CP Pistons with brand new rings

ARP main Stud

Custom RB26 sump adaptor plate with CHROME MOLY main caps

ARP Head Studs RB26 size, block is drilled and tapped to suit

Tomei Metal Head Gasket

Tomei Oil Pump & Collar

R32 GTR Head

Extensive Porting

270/270 10.8mm Lift Tomei Profile camshafts

+1mm Stainless one piece valves on Inlet & Exhaust

BC Valve Springs and Titanium Retainer kit

Painted RB26 Covers with -12 weld-ons

Gates Timing Belt

N1 water pump

Rb26 Sump (larger one can be supplied if needed)

All machining and assembly complete

$13000

STANDARD RB26DETT ENGINE - Comes with the following parts

complete inlet side including plenum, TB's, fuel rail & inj's

Complete set of covers

Cam angle sensor

turbos, manifolds, std dumps

standard flywheel

coilpacks and coilpack loom

$2900

DRIVETRAIN

PPG Straight cut gearset (1st-5th), fully rebuilt and reconditioned with new dog gears, PPG billet selectors, upgraded input shaft (Hollinger Spline). Comes complete with NPC twin plate clutch to suit, bearing carrier and everything required for it to be complete bolt in item. $8500

INTAKE

Hypertune 90mm Plenum and Hypertune Throttle Body $2500

COOLING

GREDDY Alloy Radiator R32 GTR $950

MISC

Safety 21 (pretty sure that is the brand) R32 GTR Half Cage (bolt in) with bolt in side intrusion bars. Bars are 40mm diameter. $750 comes complete with all plates and bolts.

Large Oil Cooler -10 fittings $150

WHEELS AND TYRES

Starcorp Wheels 18x9.5 & 18x8.5" rims only $800

R33 GTR Wheels rims only $900

Koya Racetech 18x9" Wheels (4 X) Black centre, polished lip Fitted with brand new 265/35R18 Federal 595 SS tyres $1000

Koya Racetech 18x8" Wheels (2 X) Black centre, polished lip Fitted with brand new 235/40R18 Federal 595 SS tyres $500

standard engine sold.

can you pls post pics of Starcorp Wheels and will you post to vic at my cost?

will have photos soon. sending down to vic will be approx 130. unless you can organise your own courier.

cheers

Edited by GTRHOLIC

ELECTRICAL

Splitfire Coilpacks Suit RB26 - Used for 3 month $450

Defi gauges - White face (COMPLETE MATCHING SET) 4.5" tacho $350

60mm Water temp $230

60mm oil temp $230

60mm fuel pressure $230

60mm oil pressure $230

60mm boost $200

All with stands, wiring, sensors and control box $1350 for the lot or will seperate.

2 x Nissan AFM's, RB series with green label comes with HKS air filter (green filters) $250 for the pair

FUEL INJECTORS

SARD 1000cc Top Feed Injectors, cleaned and flow tested. These will flow 1200cc at 60psi of fuel pressure!! $800 (brand new these are $280 per injector!)

Apexi 600cc Top Feed Injectors, cleaned and flow tested. $600

TURBOS/MANIFOLDS/WASTEGATES

T04Z Turbo kit includes Garrett T04Z turbo (0.82 split pulse rear V-Band) Turbo comes with feed line and drain. $1500

6Boost high mount split pulse Manifold $700

ENGINES

FORGED RB30/26 4WD!!

RB30 Block – extensively prepped, drilled to suit bigger head studs, bearing caps grooved etc

RB30 Crank

King Bearings – brand new

Spool Rods

CP Pistons with brand new rings

ARP main Stud

Custom RB26 sump adaptor plate with CHROME MOLY main caps

ARP Head Studs RB26 size, block is drilled and tapped to suit

Tomei Metal Head Gasket

Tomei Oil Pump & Collar

R32 GTR Head

Extensive Porting

270/270 10.8mm Lift Tomei Profile camshafts

+1mm Stainless one piece valves on Inlet & Exhaust

BC Valve Springs and Titanium Retainer kit

Painted RB26 Covers with -12 weld-ons

Gates Timing Belt

N1 water pump

Rb26 Sump (larger one can be supplied if needed)

All machining and assembly complete

$13000

STANDARD RB26DETT ENGINE - Comes with the following parts

complete inlet side including plenum, TB's, fuel rail & inj's

Complete set of covers

Cam angle sensor

turbos, manifolds, std dumps

standard flywheel

coilpacks and coilpack loom

$2900

DRIVETRAIN

PPG Straight cut gearset (1st-5th), fully rebuilt and reconditioned with new dog gears, PPG billet selectors, upgraded input shaft (Hollinger Spline). Comes complete with NPC twin plate clutch to suit, bearing carrier and everything required for it to be complete bolt in item. $8500

INTAKE

Hypertune 90mm Plenum and Hypertune Throttle Body $2500

COOLING

GREDDY Alloy Radiator R32 GTR $950

MISC

Safety 21 (pretty sure that is the brand) R32 GTR Half Cage (bolt in) with bolt in side intrusion bars. Bars are 40mm diameter. $750 comes complete with all plates and bolts.

Large Oil Cooler -10 fittings $150

WHEELS AND TYRES

Starcorp Wheels 18x9.5 & 18x8.5" rims only $800

R33 GTR Wheels rims only $900

Koya Racetech 18x9" Wheels (4 X) Black centre, polished lip Fitted with brand new 265/35R18 Federal 595 SS tyres $1000

Koya Racetech 18x8" Wheels (2 X) Black centre, polished lip Fitted with brand new 235/40R18 Federal 595 SS tyres $500

updated list, r33 gtr wheels have been sold. Splitfires and apexi injectors have been sold.

Edited by GTRHOLIC

Hi GTRHolic,

I am interested in your R33 Rims and the Greedy R32 Radiator. Are they still available?

Also where are they located so I can enquire about courier costs?

Edited by StarkReality

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • looking forward to your t56 swap man its a game changer if it works! 
    • So, when are you trying the new GR86 or BRZ?
    • Uncle Duncan Yeap, FI Interchiller  Works well, normal IAT's cruising with the WTA only went from 50°c+ to 25-30°c with the interchiller  Before, when on it hard, the IAT would see 80-90°c, now, the highest has been was around 38°c IIRC IAT is measured under the blower hat I recommend it for the street or strip where your only on it hard for 10 or so seconds, but it wouldn't be efficient for sustained track use as it would heat soak from the AC turning off or whatever it does during WOT to protect the compressor It really needs the AC running for it to not heat soak and keep the WTA coolant chilled My WTA coolant temps when just cruising is around 2°c
    • Hey Mark...sorry to interrupt your career change to hair dressing... but...did you ever fit the interchiller to the commodore, and if so how was it? And, who made it?
    • I've been pondering this, I really enjoy the convertible thing, for me, it's like riding a motorbike, without all the issue of riding a motorbike, mainly, my old sore arthritic joints getting beaten up, and, being able to do it in shorts and a T-shirt and not needing a helmet and all the other gear required, especially like wearing jackets and pants in the summer, or needing 6 layers of cloths in the winter, or not having wet weather gear handy when your 100km away from home on the bike when it decides to start raining As for the hard top and its Coupe look, whilst I do lose all that open top feeling that I really enjoy, from my experience with the NB with a detachable hard top, the cabin is a much nicer place to be, the difference in noise for one, a hard top quietens down the interior, alot, with the soft top up or down it's pretty noisy, which, after 5 or so hours, can get tiring But, as you stated, the detachable hard top totally changes the look of the car, in a really good way, and for me, the look of a detachable hard top is so much better than the PRHT which looks more like a after thought with its weird bulbous rear roof line For me, the minimal effort of putting in on, or storing it after removing it, is well worth the time and effort for the look alone And yes, I'm sure the next owner will be grateful for it as well.......  
×
×
  • Create New...