Jump to content
SAU Community

Recommended Posts

ELECTRICAL

Splitfire Coilpacks Suit RB26 - Used for 3 month $450

Defi gauges - White face (COMPLETE MATCHING SET) 4.5" tacho $350

60mm Water temp $230

60mm oil temp $230

60mm fuel pressure $230

60mm oil pressure $230

60mm boost $200

All with stands, wiring, sensors and control box $1350 for the lot or will seperate.

2 x Nissan AFM's, RB series with green label comes with HKS air filter (green filters) $250 for the pair

FUEL INJECTORS

SARD 1000cc Top Feed Injectors, cleaned and flow tested. These will flow 1200cc at 60psi of fuel pressure!! $800 (brand new these are $280 per injector!)

Apexi 600cc Top Feed Injectors, cleaned and flow tested. $600

TURBOS/MANIFOLDS/WASTEGATES

T04Z Turbo kit includes Garrett T04Z turbo (0.82 split pulse rear V-Band) Turbo comes with feed line and drain. Turbo has been recently removed and had rear housing HPC coated. this alone cost me over 240 dollars and the turbo has not been used since. Turbo is in excellet condition. selling $1500

6Boost high mount split pulse Manifold $700 set up for tial 44mm wastegate. can be modified to suit another size if need be.

ENGINES

FORGED RB30/26 4WD!!

RB30 Block – extensively prepped, drilled to suit bigger head studs, bearing caps grooved etc

RB30 Crank

King Bearings – brand new

Spool Rods

CP Pistons with brand new rings

ARP main Stud

Custom RB26 sump adaptor plate with CHROME MOLY main caps

ARP Head Studs RB26 size, block is drilled and tapped to suit

Tomei Metal Head Gasket

Tomei Oil Pump & Collar

R32 GTR Head

Extensive Porting

270/270 10.8mm Lift Tomei Profile camshafts

+1mm Stainless one piece valves on Inlet & Exhaust

BC Valve Springs and Titanium Retainer kit

Painted RB26 Covers with -12 weld-ons

Gates Timing Belt

N1 water pump

Rb26 Sump (larger one can be supplied if needed)

All machining and assembly complete

$13000

STANDARD RB26DETT ENGINE - Comes with the following parts

complete inlet side including plenum, TB's, fuel rail & inj's

Complete set of covers

Cam angle sensor

turbos, manifolds, std dumps

standard flywheel

coilpacks and coilpack loom

$2900

DRIVETRAIN

PPG Straight cut gearset (1st-5th), fully rebuilt and reconditioned with new dog gears, PPG billet selectors, upgraded input shaft (Hollinger Spline). Comes complete with NPC twin plate clutch to suit, bearing carrier and everything required for it to be complete bolt in item. $8500

SORRY PEOPLE I FORGOT TO MENTION THAT THE GEARSET IS IN AN RB25 CASING. IT CAN BE PUT INTO AN RB26 CASE AT EXTRA COST IF NEEDED. THIS IS FOR A CONVERSION I NEVER GOT AROUND TO DOING.

INTAKE

Hypertune 90mm Plenum and Hypertune Throttle Body $2500

COOLING

GREDDY Alloy Radiator R32 GTR $950

MISC

Safety 21 (pretty sure that is the brand) R32 GTR Half Cage (bolt in) with bolt in side intrusion bars. Bars are 40mm diameter. $750 comes complete with all plates and bolts.

Large Oil Cooler -10 fittings $150

WHEELS AND TYRES

Starcorp Wheels 18x9.5 & 18x8.5" rims only $800

R33 GTR Wheels rims only $900

Koya Racetech 18x9" Wheels (4 X) Black centre, polished lip Fitted with brand new 265/35R18 Federal 595 SS tyres $1000

Koya Racetech 18x8" Wheels (2 X) Black centre, polished lip Fitted with brand new 235/40R18 Federal 595 SS tyres $500

Edited by GTRHOLIC
  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Are you the new owner of GOJIRA? the townville car that was recently sold?

Impressive parts line up Free Bump

Yeah this was my old car. Last time i drove it, it had a fully built motor from Racepace Motorsport including N1 block, a T88 and a trust 6 speed dog box. New owner obviously has some new plans for it. Good luck will the sale of your parts and look after it :P

any body know the guy selling all the stuff?

Hes been on the forums be my self and other members have tried to contact him and he does not seem to reply.

If any one knows him can you let him know there are some keen buyers trying to get in contact with him.

Cheers keiron.

The guy is on holidays! Try contacting TRENT at Mercury Motorsport!!

6 Boost manifold SOLD

Yep already talked to trent this morning very helpfull fellow indeed,He seems to be taking care of the sale of said parts guys.

Give him a call for sure if your chasing up any of the items posted im sure he will be more then happy to help you guys out.

The owner is busy with work commitments atm as far as im aware and has no time to organise.

Cheers keiron

Edited by Gtir-keiron
  • 2 weeks later...

Well i dunno what to think now.

Trent from mercury answer his phone from day one i talked to him on the 6th of this month agreed on a price for the airflow meters he told me they would be sent out friday the 7th.Come tuesday i rang him again asked if they had been sent out he told me he had asked one of his employee's to do it and it was still sitting on the bench and he would get it out asap,

So thursday the 13th again get get home from work and still no air flow meters,Again i ring him again he answers and i must admit he has ans the phone every time i called and tells me he will chase it up with australia post and ring me on friday.

Friday the 14th comes and its late afternoon and still no parts turned up and no phone call from trent and mercury motor sport so i try and ring him,Has not answered the phone when i call for the last 5 days and still no parts.

To recap i went to his bank direct deposit cash into his account ring him to let him know hes all happy said he would send the parts and nothing since the 7th of this month and now its the 18th.

What are you ment to do?

Well i dunno what to think now.

Trent from mercury answer his phone from day one i talked to him on the 6th of this month agreed on a price for the airflow meters he told me they would be sent out friday the 7th.Come tuesday i rang him again asked if they had been sent out he told me he had asked one of his employee's to do it and it was still sitting on the bench and he would get it out asap,

So thursday the 13th again get get home from work and still no air flow meters,Again i ring him again he answers and i must admit he has ans the phone every time i called and tells me he will chase it up with australia post and ring me on friday.

Friday the 14th comes and its late afternoon and still no parts turned up and no phone call from trent and mercury motor sport so i try and ring him,Has not answered the phone when i call for the last 5 days and still no parts.

To recap i went to his bank direct deposit cash into his account ring him to let him know hes all happy said he would send the parts and nothing since the 7th of this month and now its the 18th.

What are you ment to do?

not sure what 2 do there buddy, but thanks for posting that cos 2morrow im supposed 2 transfer $8,000 for the gear box .. let me no when this issue is sorted

not sure what 2 do there buddy, but thanks for posting that cos 2morrow im supposed 2 transfer $8,000 for the gear box .. let me no when this issue is sorted

Well they lied to me for 2 weeks telling me that the stuff has been sent and they would check australia post blah blah blah, till i threaten to have some one go down there and get the stuff i paided for and then all of a sudden they were sent today.

And people wonder why they get a bad name.

If he had been honest with me instead of lieing to me there would have been no fkn problem.

Im just pissed because they were not honest with me from the word go,Now i just have to hope they send me what i paided for.

I still dont have the items so we will see how honest they were this time about sending the items i paided for.All friendly when taking money off me till it came time to send the stuff off i really hate that.

Hi all! Wow! So much has happened! Im back now. I just spoke to my mechanic and the AFMs have been sent. I have the money for the PPG and buyer has recieved PPG already so i dont know whats going on there. For anyone that has any problems please contact me directly. I will ensure that any outstanding issues will be sorted quick smart.

yep they turned up today.

Sent yesterday turned up today.

If only they had sent them when they said they would 2 weeks ago there would have been no problems from my end and i would be saying how happy i was to deal with Mercury.

Even if they had applogised and gave me a reason over telling me porky pies and having me ring them every day for 2 weeks.

Im happy now they are here tho.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I replaced the whole clutch line with the chase bays braided hose, I think it removes that loop, is it the short hose that comes immediately off the slave or is there a drawing in the manual to find what you’re referring to? It was just re-bled when I upgraded to the nismo slave, old slave worked fine but I thought that might help, didn’t change a thing. It’s like the first half of the pedal is pushing air and then when it finally actuates the master the friction zone is tiny. Makes it practically impossible to launch the car
    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
×
×
  • Create New...