Left Over Hid Kits

[Klymax]

hey mate im keen to buy a set

i have a 34gtt

and it doesnt have xeon lights anymore coz they got taken out when they complied it i think

do u have any kits for me?

and how much extra for some led parkers?

thanks heaps mate

Exactly what I was going to write +1 here

Cheers

[NYTSKY]

You will both need to find out what compliance put in.

Most likely H1 but you will need to check.

[NYTSKY]

Still available.

Need them gone.

[NYTSKY]

Need these gone.

[Klymax]

Need these gone.

Sorry for the late reply mate. yeah the factory Xenon's were replaced with H1 bulbs. Can you pm me which kit and cost and ill grab your details for payment.

Cheers

[NYTSKY]

PM Sent mate.

All kits will come with Free LEDs!!!

Need to be sold!!

[180boi]

do H4 suit 180sx? and do u have any hi/low to suit 180sx?

[DV5180]

do H4 suit 180sx? and do u have any hi/low to suit 180sx?

so keen to know if it fits a 180sx and if its the hi/low beam ones. if so maybe me and 180boi can do a double buy.

[NYTSKY]

Yes H4 fit 180s but these are just single beam kits.

[180boi]

any chance of getting hi/low kits for h4?

[NYTSKY]

Pm Sent.

[DV5180]

i'm keen to know bout the hi/low beam kits too for a 180sx. price etc.

if not i might get the single beam one for now.

[NYTSKY]

Pm Sent

[DV5180]

hey mate.

i can pm back cause i'm a newbie. the h4s are bit expensive for me atm. the h4 you made up from spare parts will that be covered under warrenty and will the light beam be suitable for a 180sx. not too high etc.

[NYTSKY]

Sorry that one is not covered under warranty.

[DV5180]

akk okay no worries. are you able to do the h4 6000 for 150 delivered with the bonus leds?

if so i'll take them.

[NYTSKY]

As i only have 1 H4 6000k left yes i can do that for you

H4 HELLIGKEIT 4300k (light output like 5000k)

H4 VEGA 4300k

9006 VEGA 8000k

9005 VEGA 8000k

D2S 6000k

Still available

PM Sent.

[DV5180]

one final question. how hard is this to wire up. i'v never fitted one up to a 180sx before.

also where you located. if close by i'll just pick up and save you haveing to deliver. maybe save me some $$$ on postage too.

Edited July 27, 2009 by DV5180

[NYTSKY]

Very straight forward. These are plug and play units so no splicing or wiring.

The only hard bits are making the 25mm hole in the dust cover and finding a place for hiding the ballasts

Remove dust cover

Remove halogen bulb

Drill 25mm hole in dust cover

Put in HID bulb

Connect HID bulb to ballast

Connect HID bulb wires to stock headlight wires (H4 stock headlight plugs has 3 prong, the HID has two, just find the - and + buy testing)

Then disconnect them as you will need to feed all the wires through the dust cover

The grommet on the HID bulb wires fills the hole in the dust cover so the elements cannot get in

Thats pretty much it.

Will take around 20mins-30mins to install.

[DV5180]

sounds easy enough.

any chance you can do the hi/low ones for the same price? pretty please. i'll make payment when i get home tonight