Jump to content
SAU Community

Recommended Posts

Too much stuff in my shed. All this has to go. Im sick of seeing $ laying around. Items are in brisbane.

JJR Coilpacks set of 6 to suit RB25 Series 2 $340

Delphi 1000cc Injectors (set of 6) with twin entry rail to suit RB26 $660

Set of 4 Nismo 740cc injectors, side feed suit SR20/RB25 $800

Custom exhaust manifold, suit RB25 head, high mount T3 flange with provision for 38mm gate (was using 38mm Turbosmart Ultra-gate). Has been on a engine with over 550rwhp using GT35r $400

Turbosmart Ultragate 38mm $400 (or $750 with the manifold)

FORGED RB26 Engine (covers to sump) includes N1 Block, R33 GTR crank, Tomei Rods, 86mm HKS Pistons, Tomei Oil Pump, ARP Head studs, HKS metal headgasket, ported head, Tomei valve springs, HKS cams 264/272 etc Professionally assembled and run-in and is ready to install/tune. $12000

R32 GTR Gearbox - The box has recently been rebuilt with new bearings throughout. The bellhousing is push type. I have a quckshift which i will include in the sale. Includes transfer case. $1500

ORC twin plate clutch with complete flywheel assembly. to suit most RB's Very low km's, $2000

One Piece Tailshaft to suit R32 GTST with RB25 box. 3.5” dia and will handle big power. $400

Hypertune 100mm Plenum and matching Hypertune Throttle Body $2500

HKS speed limit defencer Brand new $110

aerocatch bonnet latch new $110

R33 gtr brake master cylinder for those that have brembo conversions. Get your pedal feel back! $100

Koyo Drift tek wheels (no tyres) 18x8.5 and 18x9.5 (i think offset is +34) $1400

Carbon GT wing with posts $350

R32 GTR Guards $170 each or $300 the Pair

R32 GTR Front indicators $70 each

post-9124-1246666772_thumb.jpg

post-9124-1246666791_thumb.jpg

post-9124-1246666828_thumb.jpg

post-9124-1246666855_thumb.jpg

post-9124-1246666877_thumb.jpg

post-9124-1246666937_thumb.jpg

post-9124-1246667003_thumb.jpg

post-9124-1246667109_thumb.jpg

post-9124-1246667129_thumb.jpg

post-9124-1246667234_thumb.jpg

post-9124-1246667272_thumb.jpg

post-9124-1246667505_thumb.jpg

post-9124-1246667687_thumb.jpg

Edited by hidashino gen
Too much stuff in my shed. All this has to go. Im sick of seeing $ laying around. Items are in brisbane.

JJR Coilpacks set of 6 to suit RB25 Series 2 $340

Delphi 1000cc Injectors (set of 6) with twin entry rail to suit RB26 $660

Set of 4 Nismo 740cc injectors, side feed suit SR20/RB25 $800

Custom exhaust manifold, suit RB25 head, high mount T3 flange with provision for 38mm gate (was using 38mm Turbosmart Ultra-gate). Has been on a engine with over 550rwhp using GT35r $400

Turbosmart Ultragate 38mm $400 (or $750 with the manifold)

FORGED RB26 Engine (covers to sump) includes N1 Block, R33 GTR crank, Tomei Rods, 86mm HKS Pistons, Tomei Oil Pump, ARP Head studs, HKS metal headgasket, ported head, Tomei valve springs, HKS cams 264/272 etc Professionally assembled and run-in and is ready to install/tune. $12000

R32 GTR Gearbox - The box has recently been rebuilt with new bearings throughout. The bellhousing is push type. I have a quckshift which i will include in the sale. Includes transfer case. $1500

ORC twin plate clutch with complete flywheel assembly. to suit most RB's Very low km's, $2000

One Piece Tailshaft to suit R32 GTST with RB25 box. 3.5” dia and will handle big power. $400

Hypertune 100mm Plenum and matching Hypertune Throttle Body $2500

HKS speed limit defencer Brand new $110

aerocatch bonnet latch new $110

R33 gtr brake master cylinder for those that have brembo conversions. Get your pedal feel back! $100

Koyo Drift tek wheels (no tyres) 18x8.5 and 18x9.5 (i think offset is +34) $1400

Carbon GT wing with posts $350

R32 GTR Guards $170 each or $300 the Pair

R32 GTR Front indicators $70 each

1000cc injectors sold. Lots of interest in the coilpacks. First in best dressed.

Too much stuff in my shed. All this has to go. Im sick of seeing $ laying around. Items are in brisbane.

JJR Coilpacks set of 6 to suit RB25 Series 2 $340

Delphi 1000cc Injectors (set of 6) with twin entry rail to suit RB26 $660

Set of 4 Nismo 740cc injectors, side feed suit SR20/RB25 $800

Custom exhaust manifold, suit RB25 head, high mount T3 flange with provision for 38mm gate (was using 38mm Turbosmart Ultra-gate). Has been on a engine with over 550rwhp using GT35r $400

Turbosmart Ultragate 38mm $400 (or $750 with the manifold)

FORGED RB26 Engine (covers to sump) includes N1 Block, R33 GTR crank, Tomei Rods, 86mm HKS Pistons, Tomei Oil Pump, ARP Head studs, HKS metal headgasket, ported head, Tomei valve springs, HKS cams 264/272 etc Professionally assembled and run-in and is ready to install/tune. $12000

R32 GTR Gearbox - The box has recently been rebuilt with new bearings throughout. The bellhousing is push type. I have a quckshift which i will include in the sale. Includes transfer case. $1500

ORC twin plate clutch with complete flywheel assembly. to suit most RB's Very low km's, $2000

One Piece Tailshaft to suit R32 GTST with RB25 box. 3.5” dia and will handle big power. $400

Hypertune 100mm Plenum and matching Hypertune Throttle Body $2500

HKS speed limit defencer Brand new $110

aerocatch bonnet latch new $110

R33 gtr brake master cylinder for those that have brembo conversions. Get your pedal feel back! $100

Koyo Drift tek wheels (no tyres) 18x8.5 and 18x9.5 (i think offset is +34) $1400

Carbon GT wing with posts $350

R32 GTR Guards $170 each or $300 the Pair

R32 GTR Front indicators $70 each

GT WING SOLD

GTR GEARBOX SOLD

1000CC INJECTORS SOLD

BNR32 GUARDS AND CORNER INDICATORS SOLD

Too much stuff in my shed. All this has to go. Im sick of seeing $ laying around. Items are in brisbane.

JJR Coilpacks set of 6 to suit RB25 Series 2 $340

Delphi 1000cc Injectors (set of 6) with twin entry rail to suit RB26 $660

Set of 4 Nismo 740cc injectors, side feed suit SR20/RB25 $800

Custom exhaust manifold, suit RB25 head, high mount T3 flange with provision for 38mm gate (was using 38mm Turbosmart Ultra-gate). Has been on a engine with over 550rwhp using GT35r $400

Turbosmart Ultragate 38mm $400 (or $750 with the manifold)

FORGED RB26 Engine (covers to sump) includes N1 Block, R33 GTR crank, Tomei Rods, 86mm HKS Pistons, Tomei Oil Pump, ARP Head studs, HKS metal headgasket, ported head, Tomei valve springs, HKS cams 264/272 etc Professionally assembled and run-in and is ready to install/tune. $12000

R32 GTR Gearbox - The box has recently been rebuilt with new bearings throughout. The bellhousing is push type. I have a quckshift which i will include in the sale. Includes transfer case. $1500

ORC twin plate clutch with complete flywheel assembly. to suit most RB's Very low km's, $2000

One Piece Tailshaft to suit R32 GTST with RB25 box. 3.5” dia and will handle big power. $400

Hypertune 100mm Plenum and matching Hypertune Throttle Body $2500

HKS speed limit defencer Brand new $110

aerocatch bonnet latch new $110

R33 gtr brake master cylinder for those that have brembo conversions. Get your pedal feel back! $100

Koyo Drift tek wheels (no tyres) 18x8.5 and 18x9.5 (i think offset is +34) $1400

Carbon GT wing with posts $350

R32 GTR Guards $170 each or $300 the Pair

R32 GTR Front indicators $70 each

  • 2 weeks later...
Too much stuff in my shed. All this has to go. Im sick of seeing $ laying around. Items are in brisbane.

Set of 4 Nismo 740cc injectors, side feed suit SR20/RB25 $800

FORGED RB26 Engine (covers to sump) includes N1 Block, R33 GTR crank, Tomei Rods, 86mm HKS Pistons, Tomei Oil Pump, ARP Head studs, HKS metal headgasket, ported head, Tomei valve springs, HKS cams 264/272 etc Professionally assembled and run-in and is ready to install/tune. $12000

ORC twin plate clutch with complete flywheel assembly. to suit most RB's Very low km's, $2000

One Piece Tailshaft to suit R32 GTST with RB25 box. 3.5” dia and will handle big power. $400

Hypertune 100mm Plenum and matching Hypertune Throttle Body $2500

HKS speed limit defencer Brand new $110

aerocatch bonnet latch new $110

R33 gtr brake master cylinder for those that have brembo conversions. Get your pedal feel back! $100

Koyo Drift tek wheels (no tyres) 18x8.5 and 18x9.5 (i think offset is +34) $1400

R32 GTR Guards $170 each or $300 the Pair

R32 GTR Front indicators $70 each

  • 2 years later...

you have a left hand front Orange indicator for a R32 gtr!?

do you know what average postage would be on that item!? (postcode 2800) just an average is fine though.

cheers josh

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I believe there was a similar one posted by @duggyphresh. They were re-routing their battery positive cable in the way I am also trying to achieve. Sorry, I’m new to this forum, so was a bit late to the party by a few months and so reignited the old thread, as I wanted to know how they got on with doing it.
    • Wasn't there a thread on this very subject just a few weeks ago?
    • Hi all! Looking to relocate the battery to the trunk of an R34 GTT. I want to do it using as many stock GTR components as I can (including the harness protectors from the 34 GTR that run underneath along the chassis to the engine bay). So far I’ve purchased the battery tray from a 33 GTR, as the captive weld nuts are already there just asking to be used. There is also the slight issue of now having to relocate the ABS/TC/Fuel Pump Control ECU, which in GTT’s sits right above where the battery will then sit on the tray. Has anyone already achieved this, and if you have any pics that you wouldn’t mind sharing? It would be great to see how others have done it and where you put them, as there are countless holes in the parcel shelf panel to potentially use. Just trying to get some ideas bounced around, and to help uncover any potential problems I may encounter by  my choice of location. TIA for any help!
    • Brand was ard.   I also threw a brand new battery at it and beefed up the wire from the alternator to battery and added an extra earthing point from the battery 
    • Evening all,       I'm replacing some bolts on my RB25 with probolt Australia bolts.       Does anyone know the following, m5 m6 etc 10mm 20mm etc       Coil cover   Cam covers   Plazamaman fuel rail   Front cover (timing cover)   Etc   Any help would be awesome   Or any lists anywhere
×
×
  • Create New...