Jump to content
SAU Community

Repairing Carbon Fibre

Mushroom
 Share

Recommended Posts

Mushroom Veteran

Mushroom

Posted
Posted

Guys I have a carbon panel that has had the clear coat cracked and I was wondering how do you fix it as it is in a very visable area.

if anyone knows even of a place i can take it to be repaired in brisbane?

Link to comment
Share on other sites
Spunky Munky Grand Master

Spunky Munky

Posted
Posted

Hi mate, it's really hard to fix CF and expensive too...I'd see if I can get the whole thing replaced if I can. However, what you can do is buy CF sheets by the meter at some places and then fix that particular part of your panel yourself or get a panel shop to do it for you.

Check out www.topstage.com.au for CF sheets. Speak to Freddy and say Kevin with the black Skyline sent you. He'll look after you.

Link to comment
Share on other sites
Mushroom Veteran

Mushroom

Posted
  • Author
Posted

yeah guys it is only clear coat that is cracked, the part was damaged in transport so I really don't want to shell out more money for the same item.

I will check with a body shop thanks guys!

Link to comment
Share on other sites
Brandon Veteran

Brandon

Posted
Posted (edited)

Hey! I had sorta the same problem only mine would probably be worse. I called up some paint shop and the quote is ridicules (its even more exp than buying a brand new 1, considering a new 1 is 450 as 1 of the trader is selling it).

Anyway, like you, I dont really feel like spending that much on fixing it. Depending on how much you want to do, it can take VERY long to sand it down. Mine was turning yellow with bird shit size clear gone and I decided to sand it down to the carbon and get it re-coat. The end result was amazing. I never knew its this BLACK to begin with since I'm used to seeing it yellowish.

Anyway what I did was get a 160 to sand of the first few layers of clear (the previous owner obviously didnt sand it before he re-coat it as it feel like sanding 4786239463789 layers when I'm doing it). To cut everything short, it took me a good 8hrs to sand it down. Start with 160 or 180 and change to 240 when you're down to the thinest layer of clear. When you start seeing carbon or you're sanding black stuff, change to 2400 to make the whole thing smooth again. Make sure you've got the wet/dry type of sand paper as you'll need to sand it with water towards the end use of each grit size. Dont be too concern with how scratched it looks at the end. Pour some water over it and if it looks glossy, you'll be fine (thats how it'll look like when its coated).

It cost me around 130 to get everything done.

http://www.sauqld.com/ipb/index.php?showtopic=2248&hl=

Here's some photos of the after pic. Pity I forgot to take the before for comparison. Cheers!

Edited by Brandon
Link to comment
Share on other sites
F1 Carbon Explorer

F1 Carbon

Posted
Posted

Just thought I`d say, your unlikely to have this problem with Dry carbon fibre as the resin is pre-pregnated and autoclaved. Where as the wet lay up carbon is a seperate layer of resin. So the top layer is prone to cracking and also warping and giving you a ripple effect. This is because the resins used can`t cope with temperature, so the sun heats up the resin and distorts it. Pre-preg carbon is baked in the autoclave 140 degrees, vacuum bagged and presurised, so the resin won`t warp. Just a food for thought when purchasing carbon fibre products. Better spending more on Dry carbon that will last a long time and look spot on, than waste your money on repairs and a shoddy looking product. Also the final product weighs much less due to a less resin used.

Link to comment
Share on other sites
  • 2 months later...
AnDyStYLe Community Regular

AnDyStYLe

Posted
Posted

Bump, up she goes...

Where can I get an good quality UV resistant clear coat in an aerosal guys?

I'm going to try do some repair work myself and sand back the clear coat. I'll need to re-coat the clear and hoping to get something that won't turn yellow and discolour after this summer :D

Cheers,

Andy

Link to comment
Share on other sites
Carbon 34 Grand Master

Carbon 34

Posted
Posted

it can also be lacquer. if thats is the case buy marine grade lacquer to respray it. to stop yellowing ,dull, cracking

note Carbon fiber uses different epoxy for its clear coat as you put it. you need surf board grade epoxy to be strong enough for car parts

you dont need to autoclave parts either, unless you have a vacuum pump etc around. Im doing heaps of my stuff now . all fine without it.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Lithium
      Boost level and torque curve

      By Lithium · Posted

      As someone who has been playing with turbo things for some time now, be prepared for this to not be the first time feeling this way    I'm busy as atm, but if no one else covers the things I'm realising are worth mentioning to you then I will when I have a chance as it seems like I overestimated your knowledge on how turbos and wastegates work.  Otherwise I recommend having a look around how wastegates and boost control work, really anything on understanding the general mechanism of boost control as it will help you find the answers to the questions you're looking for.  Your initial question jumps some fundamentals.
    • thx78
      Boost level and torque curve

      By thx78 · Posted

      I don't understand anything anymore.
    • thx78
      Boost level and torque curve

      By thx78 · Posted

      so this is an anomaly??? I thought it was a voluntary increase
    • Duncan
      Boost level and torque curve

      By Duncan · Posted

      we can only guess exactly what happened from our keyboards, but to me it looks like they were targeting 27 but the wastegate was too small or poorly controlled and the boost crept up, that is quite common
    • Lithium
      Boost level and torque curve

      By Lithium · Posted

      Good points!  Took those for granted - though I *did* actually give an example of winding boost up more than it had been before where I wasn't actually specifically looking for more peak power.  The Toyota Starlet dyno plot that I shared and mentioned showed an overlay from the previous tune it had and the one I'd redone, I left the boost targetting the same as the old tune but then after peak power I ramped boost up by a good 5psi or so over what the old tune had at the same rpm. The reason I felt comfortable with this (though the owner of the car had a "are you sure?" moment when I suggested it) is that the setup wasn't turbo limited, it was largely head sealing limited and the owner was a bit concerned as for the last few seasons he'd had issues with head lifting - sometimes not completing an event without having some headgasket issue, so he didn't want to run any more boost than it was. The reasons I was ok with raising the boost a good 5+psi MORE than that was that I left it where it was in the middle, and only increased it where VE (and therefore cylinder pressure vs psi) were dropping hard and I didn't stop the torque from dropping, just reduced the drop.  Well, there is that and the fact that the previous tuner had it overtimed by near 7degrees at peak torque - but that's another story haha.    I didn't really go into detail about that "turning it up more" thing but now you've mentioned the "not detuning", sometimes the boost *can* be turned up higher than you'd expect if the setup allows for it and you do it smartly.  I've tuned things to run 30psi on BP98 "safely" that a few years ago (or still?) people would cry that it was a stupid idea - but given they were well intercooled, low EMAP turbos and only doing that kind of boost where VE is dropping etc I was pretty confident it wasn't as cowboy as it sounded at face value and we never ended up with issues as a result of it.     
×
×
  • Create New...