Jump to content
SAU Community

Recommended Posts

see the problem is like this ... you don't really have to respond: IF YOU CANT f**kING CONTRIBUTE DON'T POST SMART ASS REMARKS!!! IF YOU DON'T KNOW SHUT THE f**k UP!!! NO ONE MAKES YOU RESPOND!!! THIS IS A FORUM !! NOT A PLACE FORE THE SEXUALLY OPPRESSED!! SIMPLE f**kING QUESTION: I NEED TO INSTALL A f**kING BAND EXPANDER so far clear f**kers??? now CAN I DO THIS BY JUST REMOVING THE SIDES OF THE f**kING STEREO/HEAD f**kING UNIT OR WHAT EVER THE f**k U WANT TO f**kING CALL IT OR GO f**k YOURSELVES !!! LITTLE CUTS!!

You car is a G35 in the US. Get on Youtube and look it up yourself, It's not difficult ffs.

Yes you need to remove the stereo. Now go and smoke a doobie and calm down.

I know that these Nissan skyline v35 250gt have two cam position sensor bank one and two are located in the back of the engine by the firewall. How many crankshaft sensor does the car have and its location an also what is these two sensors bolted with one bolt in front of the engine with wires attach to it on the inside with oil on it.

The front blue plugs are for the VVT actuator coil.

There is only one crank sensor, it is located at the bottom of the bellhousing. The flywheel has a steel trigger disk bolted to it and the magnetic sensor picks it up.

On the back of the head, on the intake cam side. You will see the green/black plug. Once you find it you will then need to ask us how to remove the plug.

Seriously, were there any faults before you did the plenum clean?

Can anyone please tell me have they ever experience a dtc P1110 on these skylines and what is the cause/fault of the code. Am burning alot of gas plus lack of power an acceleration also black smoke coming from exhaust with a strong fumes along with it. Tiptronic mode start off in 3rd gear but the car is stationary in parking lot. Any idea anybody

I have replaced about 15 cam sensors. They are getting quite common. I used to sell aftermarket ones but had too many issues with frustrated customers chasing faults like yourself.

If the code is up, there is something wrong with either the cam sensor or the power to it. If it is faulty it will have put your car into limp mode, which explains the sluggish and rich running.

Ok thanks. At least I got some answers without the sarcasm u always provide with it lol

Dealing with sarcasm is hardly a problem considering the free advice given will likely save you alot of money and time.

No one has to help you.

Ok thanks. At least I got some answers without the sarcasm u always provide with it lol

Asking in 4 threads won't improve the responses either. You are asking complex questions that require detailed technical explanations, and you are only giving us little pieces of information to go off.

I have explained the fault to you in plain English, if you can't work out how to do it, or can't google what I am discussing, take it to a good mechanic that understands VQ's. These are not easy engines to work on unless you completely understand modern engine design, and no-one with that knowledge has the patience to explain every detail.

No sarcasm here, I am just being honest. Can you point me to the sarcastic reply so I understand what you mean by that? Would you rather I stayed out of the V section and let all the other guys helping to give their input?

You can look forever, you will never find one. :P Our VQ25's don't have an intake valve control solenoid as they don't use a hydraulic actuator.

Here is the VQ25 electronic cam timing control assembly, it is completely different to the VQ35 setup. You will not find information on the VQ25 unless you can read Kanji, as it was only sold to the Japanese market afaik.

Click on the pic to see it in operation.

post-63525-0-40907500-1406383615_thumb.gif

So in other words what is this p1110 for man. I trying to fix the problem I got rough idle with the need fluctuated just a little. Plus with ur skyline you have when u in park an you shift it to the tiptronic mode but u did move the car, is it suppose to be in 3rd gear or first gear cuz mines in 3rd gear

Probably the sensor. Without getting my Consult 3 reader on it I can't do much diagnostics.

The tiptronic drops into 4th on the 5 speed box, it only goes back to first if you push the gear down - lever.

If you can find them, Nissan will probably need to order them in from Japan, and you will get quoted $200 odd each. One of the cam sensors is specific to the VQ25dd.

I prefer to find out which sensor is stuffed first and change that.

Hey Scotty I was removing all six of my spark plugs today an discovered that 5 of them were dark round the ring with a whitish grayish color on the time an one that just completely black tip but the screw part of the plug loom brand now. I have also saw some wetness in that same hole with the black tip plug clean screw housing an upon inspecting it was fuel. What am I facing Scotty. I need ur help or anybody

Hey Scotty I was removing all six of my spark plugs today an discovered that 5 of them were dark round the ring with a whitish grayish color on the time an one that just completely black tip but the screw part of the plug loom brand now. I have also saw some wetness in that same hole with the black tip plug clean screw housing an upon inspecting it was fuel. What am I facing Scotty. I need ur help or anybody

Hey Scotty I was removing all six of my spark plugs today an discovered that 5 of them were dark round the ring with a whitish grayish color on the time an one that just completely black tip but the screw part of the plug loom brand now. I have also saw some wetness in that same hole with the black tip plug clean screw housing an upon inspecting it was fuel. What am I facing Scotty. I need ur help or anybody

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks! Will get it looked at before winter 🥶 other than that she's a mint ride love it aye 
    • FWIW a lot of the local owners that do a big build tend to have cars that are perpetually broken. 
    • I just got this system but haven’t installed yet I got a Moroso sealed box (defect reasons) which will be set up same as their pic The quality is high grade, the correspondence I had with the owner (former head designer for Rockford Fosgate) was unbelievable, guiding me with what I needed. Even told me not to buy some things as it could be sorted in a different way at his loss. Just a bit of a bite with the exchange rate and don’t purchase gear in 1 hit that goes over $1,000 au, lol I forgot!  
    • Thanks mate for that reply. Very helpful.    it’s a 2022 400R so would most likely lose those features as you say.     I did a quick compare of a rv37 nav and heading for sale in Japan to q50 model. I’ll pop pics below. Seems  Japan spec head into top, nav unit second below it   below pic Q50 aud delivered     differences seem to be Aus delivered has a different plug top left hand side of head unit- not sure what and where it goes.   and nav unit Japanese tv37 had an extra plug put    Again I’m really not sure what each of these differences mean!       the actual plugs on a v37 and q50 screens look identical on both screens… pics below for comparing. (One screen was is a us delivered one) but should be same gps signals etc as Australia.    If it were as simple as swapping a nav unit from q50 aud delivered im interested -just want to figure out what the missing plug is for before spending big $ on a second hand part for it to not work, and I guess with the head unit, if the band expander does the job (I got a 20mHz so should get the range I’m after) so should narrow my issue down to nav unit only.  I’d love to know what the extra cable on rv37 does and if I eliminate that part what it’ll do to the setup,    and also, if I can figure out what that head unit plug difference is, what does that cable do and where does it got can it be altered or re-plugged?! Excuse my ignorance what is ACP/AA, what does that stand for? (Apple car play? Android air play)? so If I swapped head units to save using a band expander, I’d likely lose those better features to have an oem Unit operational. Better to use a band expander and retain AirPlay options and newer version of head unit     provably best to band expand it, and focus on the nav unit. th isn’t  a big deal/ would be cool to have it working  from what I can tel we use a PAL Signal and Japan uses a NTSC signal  I don’t know if there’s a co better or if the screen only reads NTSC, or if it’s the tv module that needs replacing… no big deal don’t need it but more of a curiosity thing on that!   Thanks for the info re tyre sensors, helpful and great to know.  I was reading the online manual off Japan website and it seemed to make it sound more confusing than it is  I guess a rim replacement would require the sensors to be moved to a new rim to carry that option over?!     Thanks for the info regarding diagnostic mode. I appreciate your help mate. Trying to brainstorm here to find a solution to get as much gadgets as I can working! I plan to get my local Nissan tech to have a look too who used to be at an Infiniti dealer back in the day to see if any thing they have or idea can find a soliton. But hoping anyone here has gone down the same route to make life easier!!   i guess identifying the cable/plug differences and what they do would be a great way of finding out if the units are transferable    thanks again 
    • No idea about the remote start part. If the V37 nav is anything like other Nissan JDM vehicles, you can't get the factory Japanese nav working in australia, a card from a different car almost certainly won't work, those cards are usually matched to the serial number of the DCU.  You could be possibly swap out the components from a AuDM Q50 to get it working, but if this is a new model (2021+) 400R, then you will lose the newer features like ACP/AA.  That said, if you have ACP/AA, just use google maps.. I assume a band expander would be required to get the local radio stations, but don't forget the Japanese FM band is narrower than ours, so you still might not be able to receive all Australian stations. I can't see any reason the tyre pressure sensors won't work here, there is the sensor unit inside the rim and the receiver nearby in the wheel well.  I have never had to change the batteries on my 2015 Q50, so I assume they last quite a while.  A straight battery change shouldn't need them to be re-registered as they are the same unit, that should only be required if you replace a sensor with a new one.   Word of warning, if you ever go into the 'secret' diagnostics mode on the main screen, DO NOT EVER do a 'reset' in this menu, it will erase all of your model specific data in the DCU and you will need a trip to a dealer to re-program it all, which would be particularly painful being an import.  This applies to the AuDM Q50 too.
×
×
  • Create New...