Jump to content
SAU Community

Recommended Posts

Did some tuning over the weekend. sorted a boost leak that made a bad noise at 17+ psi. After going over the logs from friday night, the car makes 16psi at 4000rpm. I've upped the boost to 19psi, but havn't done and tuning or logging on it yet.

Damo wasn't able to drive the car for more tuning today, so i knocked up a heatshield to keep the inlet cool

P2200053.jpg

Should have the tuning finished this week, and then it's off to it's first supersprint on sunday

Well the car got it's first run on the track this weekend. I was pretty happy with how it went, only problem was a pertty bad shudder though the steering wheel after the brakes heated up, i'm hoping it's just the pads going through there first heat cycle. They are Endless ccx that came with the calipers, and from a quick glance at the net, other people have had the same problem with the stoptech/ccx combo. I recon I'll put some hawks into them.

The car is very easy to drive, and we only just touched the surface of the shock tuning, the rebound is still at full soft. The car was still getting .5 sec a lap faster with each change. Ended up the day with a 62.8. Always fun when people come and basicly call you a lier when you tell them it's a standard wrecker rb20, with a rb20 highflow.

I will put some video on the tubes tonight, and upload some of Damo's artsy pics

the washer bottle is the temp catch tank.

no idea on power, only dyno it's been near is the arse dyno, asit was all road tuned. It's running 16psi boost at the moment...might need to turn it up some more though

Always fun when people come and basicly call you a lier when you tell them it's a standard wrecker rb20, with a rb20 highflow.

Don't you just love it. Its a good feeling when you exceed peoples expectations with a humble, maligned RB20 :)

Re the brakes , CCX are good things but perhaps they are too hard on rotors. I have used only one set and loved them but they did seem to have an appetite for rotors with regards to shudder and cracking. I will be trialling the PFC 06 pads with the Stoptechs and 343mm rotors. I am really happy with how they have all come up. I will try and get a set of DS3000s to trial back to back with the PFC06 before they get too worn

Well the car got it's first run on the track this weekend. I was pretty happy with how it went, only problem was a pertty bad shudder though the steering wheel after the brakes heated up, i'm hoping it's just the pads going through there first heat cycle. They are Endless ccx that came with the calipers, and from a quick glance at the net, other people have had the same problem with the stoptech/ccx combo. I recon I'll put some hawks into them.

The car is very easy to drive, and we only just touched the surface of the shock tuning, the rebound is still at full soft. The car was still getting .5 sec a lap faster with each change. Ended up the day with a 62.8. Always fun when people come and basicly call you a lier when you tell them it's a standard wrecker rb20, with a rb20 highflow.

I will put some video on the tubes tonight, and upload some of Damo's artsy pics

Any Vids/pics yet?

Nice vid. How fast was your GTR around SP?

Best I got was a 60.9. But as you can see it's all about HP, and the GT-R was up 10-15km/h at the end of the straights, and cause of the brake problem was a braking 35-50m earlier than a was in the GT-R.

In the Targa N1 the last time I drive it, it was in 2009 trim, and I got a 60.3. But 2010 trim was about 50rwkw more.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I haven’t taken them out of the cases yet    inside the box is this packaging which is pretty much like a massive blister pack 
    • Purchased a NC MX5 a while ago Basic suspension mods done, BC coils and Whiteline sway bars  New DBA calipers, discs and pads Added some 17 x 8 Konig Decagrams with 215/45 17 PS5's Added some typical NA bolt on's, i.e. full exhaust and intake  Added 0.5ltrs with a MZR2.5 swap, nice bump in torques  Found a detachable hard top which is locked in for a colour match with my local paint shop in Feb 25, this also includes some PDR as it has received a few love taps from parking in the local shops when in the hands of my Minister for War and Finances, me, I park nowhere near other cars and typically park on the street The little thing is awesome, I drive it everywhere, it handles like a dream whether I'm up it or just cruising  But now,  because I'm a idiot, I keep looking at turbo kits....... did I mention I'm a idiot Why is dose so appealing  All of the NA 2.5 glory, well.......until sometime in 2025 anyway....🤪  
    • I would not be surprised if you are the only person on earth that has the interest/desire to do that lol.  The Haltech base map is a really good starting point, the car will fire easily and drive very well, even on mild boost levels. To me, following your advice sounds like some sort of ancient Chinese water torcher lol (this is not an insult Josh, never change <3)
    • Those car show concepts from the 2000's and 2010's like the Floria and IDx were brilliant and should've gone ahead, at least one of them. But neither Honda nor Nissan are thinking about affordable performance any more, which is truly sad.  Even if Toyota's liquid hydrogen ICE development reaches the point where it's commercially viable and the infrastructure to support it, Honda/Nissan would have to wait until Toyota allow fee access to their patents to offer it with any smaller performance models they released to take advantage of it.  
    • A sporty manual RWD coupe with a IL4 Honda engine would only be a good thing I assume we won't see anything released for a few years though, unless informal talks and designs have been going on for a few years,  and due to the current, and future, emmisions and safety requirements, I assume anything "sporty" they would do would be at least some hybrid thingie And hopefully anything they are thinking of has nice lines, without lots of plastic and fake bits hanging off it like that horrendous FK8 that looked like it was designed by a 13 year old The other issue of course in the current market is cost, currently the type R is around $70k, a twin is around $50k Meh, I'm old and grumpy and would rather buy a older model car and waste my coin on that than buying anything currently available new  
×
×
  • Create New...