Jump to content
SAU Community

Recommended Posts

from the corner weighting of mine and others the drivers side is heavier than the passenger side. i would say that the adjustments made to even the front out has offset the rear. unless you have adjustable sway bar links. (rose joint style) than any change in ride height or spring pre-load afects the car somewhere elce.

did you do the adjusting Woo

Yes I adjusted it. But I have all standard links etc, the corner weights are only adjusted via the coil overs.

All 32's are simply heavier on the driver's side, come to think of it, so is Berry's 34, but by a LOT more than this. (Obviously the 4WD driveline has a lot to do with that).

To my mind, it's more important to have equal weight on the front to minimise brake lockup.

Edited by Marlin

Your never going to know without sticking a camera in there. But one of the circuit r32's down here has a greddy oil pressure gauge, and the warning light alwyas comes on under brakes. The other R32 down here that is quicker doesn't have a gauge, and that ran a bearing at the v8 supercar round last year, it was suspected it was under brakes. But we really don't know

i have noticed on a couple of occasions mine has gotten low oil pressure under brakes and in some.one elses car i have noticed the warning light come on under brakes, never had an issue round corners.

See, there's ya problem!

Data logging, gauges, lights, oil coolers. Don't run them mate, outa sight, outa mind :P

(only half joking) :D

I'm with you, I have a boost gauge and that is it :)

Everything else is going to tell me my motor is going to be f**ked, I'd rather be told by the motor itself haha

I've had 3 engines in my car...

The first let go with all gauges connected.

The second let go on it's first venture with all gauges connected

The third lasted a lot longer then the other two, purely because I only had the tacho and boost gauge connected... Reconnected oil pressure and the motor shit itelf 6 hours later...

Fourth motor is going in at the moment...

Edit: Oh, and LOVE those pics!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I like it when the counter chick leads you out the back into the racks and says "have a grub around in here and see if you can find what you need. I'll be back in a few minutes. Just left me in front of a massive motorised shelving system and 2-3 million fasteners, so I could find a peculiar SS shoulder bolt with cap head. Gotta love country towns.
    • I used this https://osgiken.com.au/product/os-giken-os-250r-lsd-gear-oil-80w250-1-litre/   shut my nismo 1.5 pro up by heaps…. Not silent though. Gives the car character and personality. It ain’t a carolla. If you want silent, put a quaife in it.
    • It's about the same time for me from Bunnings, or the Fasteners. My big push away from takeaway food, and gluten in general keeps me away from the Bunnings Snags too! Weather up here, I've been out for two walks today in the beautiful sunshine. Had a few little drizzles, and some wind, that honestly, a tin of beans and I could compete on how harsh she blows Thankfully, being this bit inland, we're not getting anything much really. Will probably pick up a bit more when/if Cyclone Alfie decides to come ashore. A few areas in the GC though, and south into NSW are really getting smashed though! Right now, I'm just annoyed Alfie hasn't hit, as I'm not allowed to crack into the BBQ foods like the bacon and eggs until the Cyclone hits "In case we lose power"...
    • I love fastener joints, the price difference between them and joints like Bunnings or Super Cheap is amazing, and they either have exactly what you want, or they can get it to quick They have even given me some for free when I only needed a couple of specific size In saying this, I have paid premium for fasteners from Bunnings if they have the sizes I need, but only for convenience really, as my local is only 10 minutes away, the Sushi joint near them is also a consideration  How's the weather Matt? Stay safe mate
    • Wideband is worth setting up if only for tuning purposes. I would not mess with the ignition system unless there's a misfire. HKS crank trigger is popular out here for the relatively easily sourced Denso crank sensor, not a bad idea to install as well regardless of power level on a standalone. Boost leak test is worth thinking about. Oil pressure sensor tied to a fuel cut isn't a bad idea either. Getting the tune figured out is a good idea. Without putting eyes on it and getting under it there's no way for us to tell you exactly what it needs but most likely you're down to the last 10% that will make a big, big difference in how happy you are with the car.
×
×
  • Create New...