Jump to content
SAU Community

braided oil lines for a 180sx

decaf

By decaf,
in Engines & Forced Induction

 Share

Recommended Posts

decaf Rookie

decaf

Posted
Posted

Anyone got these fitted to their turbo?

I blew one turbo and replaced it. Just recently my oil line has come 'almost off' as it was leaking and creating smoke. The mechainc said it might be coupling that has just worn over the years. he tightened it and told me to watch it.

Yesterday i got an exhaust put on and it is smoking agian around that area. It might be the glues and shit they use but i dont want to take a chance as i can see some oil that has dripped on to something under the turbo.

If you have them can you let me know where to get them and how much they are. It is to expensive popping turbos.

thanks

Link to comment
https://www.sau.com.au/forums/topic/27803-braided-oil-lines-for-a-180sx/
Share on other sites
browny Proficient

browny

Posted
Posted

For braided lines budget at $100-120 a hose using Earls.

Adaptors $15ea

Straight ends $20ea

Hose $40/m

90 deg adaptors $50ea

The Earls stuff is easy to make yourself.

Speedflow is another alternative, which I think it is considerably cheaper. I haven't used it and i'm unsure of the quality. I know there are people on here that have used them so they will be able to tell you more.

YBSLO4 Proficient

YBSLO4

Posted
Posted

If i were you i'd undo the top oil line and make sure whoever refitted your turbo has put the brass washer back in before screwing the oil fitting and line onto the turbo. I bet its missing, causing it to leak over the turbo resulting in the smoke around it. Youc an get these washers from Pirtek for a few bucks. If youw ant braided lines anyway take the standard lines off and take them to Pirtek and they will be able to match up a complete set up, remember you have one oil feed and one oil return underneath, then the two side one's are water lines. But one warning expect to pay big bucks. It's 24 bucks per straight connecter, 28 per 90 degree bend, not to mention the fittings you need for connecting the lines to the turbo. Then the braid itself is anywhere between 25-90 per meter depending on size and inside tubeing used.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Yeetus
      Has anyone put in brand new full carpet? (not floor mats)

      By Yeetus · Posted

      Unfortunately haven’t taken pics yet after it was finished. All the edges are hemmed nicely, just had to cut holes for the gear shifter and seat bolts and seat belt bolts in the rear. The molds seem like they’re done with steam and a layer of glue on the underside to hold a bit of shape but still soft enough that it’s a good fit when it’s all pressed down.
    • dyl33
      Has anyone put in brand new full carpet? (not floor mats)

      By dyl33 · Posted

      Got any pics of the carpet fitted?
    • Dose Pipe Sutututu
      Mistakes were made, my R34 Story

      By Dose Pipe Sutututu · Posted

      When's the rear mounted turbo kit coming? Needs dose and V8 chop idle lol.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I was very unimpressed with how the car came up from the A pillar forward, before I hit things (twice). It all has to go. It had to go, but now it has to go... more. So we finally found the very first Shennanigans with the entirely perfectly setup engine that had no problems being pulled apart to improve on 'was perfectly fine'. Cam bearings looked a bit... stock. Which isn't entirely bad given they were stock and this is a ~20 year old engine. So new cam bearings are on the way because it's somewhat difficult to get to this stage to do it later, and it will trash the block. It was quite unusual that it wasn't done when the perfectly new-looking VCM cam was originally installed by [unknown] What IS unusual is the cam that was installed there was advanced SIX degrees. As to why there is no way to know.. however it could have been @Dose Pipe Sutututu's mate who wanted a larger cam sound but also wanted it to come on earlier to be more usable. This is my dyno sheet with the previous setup - This cam is not supposed to peak until 7000+ RPM, according to VCM. This is what lead me down the whole 'my heads/intake setup is running out of puff and can't support the cam' line of thinking to begin with. Anyway too late now - New cam is in! It could be rather funny if this smaller cam acts like a larger cam because it isn't advanced six degrees. In the spirit of everything is working amazingly - the COMP cam required no dialling in whatsoever. It was about 0.5 degrees advanced, which seems pretty bang on. Any adjustment either way would be further out. I'm told as a chain breaks in it ends up regarding back about 0.5 a degree as the chain breaks in, making it bang on. In the spirit of everything was previously working amazingly - The timing gear that was taken out turned out to be was an N-Motion double timing chain kit, with adjustable cam gear (which is how it was 6 degrees advanced) and all looks entirely perfectly new. It also had a Torrington bearing, which was one of the reasons I ended up getting the Cloyes kit which they used in the C5R 24 hour racecar - Because I couldn't confirm what was in the engine when talking to Tony Mamo. I did believe however it was a Double chain kit of some kind... but found no supporting documentation or evidence for it.
    • Yeetus
      Has anyone put in brand new full carpet? (not floor mats)

      By Yeetus · Posted

      I recently did this to my R33 with the full set from Car Mats Direct, they can't do the vinyl anymore that's advertised on the website due to a supplier issue so I ended up with the Black Loop Pile which looks great. I went all out with rubber sound deadening sheets from Repco and also added the sound deadening foam layer option with the carpet. Makes a world of difference and got rid of all the weird smells in the 29 year old interior. It was a bit of work but I'd 100% recommend it, Car Mats Direct had awesome customer service and quick postage. Replaced my seats with some sporty ones from Autotechnia while I was at it, feels like a new car.
×
×
  • Create New...