Jump to content
SAU Community

Grip Practice Day 8/7/09

Noddy

By Noddy,
in Events

 Share

Recommended Posts

Noddy Proficient

Noddy

Posted
Posted

In Warwick there is a track called Morgan park. Its about 2 hours south west of Brisbane. It takes me Just over 1 hour from Queensland Raceway. Most Wensdays are practice days at morgan and cost $55 for 1/2 day and $70 full day. No cams lic needed, just helmet and long pants and sleeves.

This wed is no different and I will be doing some testing there for most of the day. If anyone wants to come out and have a crack at the track, I would be happy to give some pointers and to show the way around the track. lines etc. Some of you would know it is where the Nissan Datsun Nationals were held at easter. In the sprints I came in 4th behind Mark Berry's Advan R34 GTR, Brad Botcher's GTR and John Penlington's Unique Auto Sports Z32.

Only real point to remember is that drift is frowned apon and if you go sliding around, even unnessacery powersliding you will probably be asked to stop or go home if you do it again. I have spent the last 3 years gaining some respect there and If you are going to be a wank out there, I dont want to know you.

Any how, Morgan Park is a top track, 2nd only to Lakeside in QLD is my opinion. If you think grip racing, time attack or sprinting is something you might like to give a go, come on out.

Link to comment
https://www.sau.com.au/forums/topic/278036-grip-practice-day-8709/
Share on other sites
jaqule Grand Master

jaqule

Posted
Posted

I am going to link drift the whole track , dedicate it to you Noddy and leave LOL.

JK

I would love to but busted clutch ATM , really want to see what my car is like as a cuirct car ..

Noddy Proficient

Noddy

Posted
  • Author
Posted

Thats a shame it's on the same day but, you guys enjoy (the infinite crapness of) QR. That place is so ho hum to drive. I just can't get into it.

Jangles...... I wana see the ke stylin around the track, If u bring it 1 day, I will drive it!!! as for the purple ppl eater, might go 1/2 ok. I might suggest some minor setup changes though.

FineLine Grand Master

FineLine

Posted
Posted
Thats a shame it's on the same day but, you guys enjoy (the infinite crapness of) QR. That place is so ho hum to drive. I just can't get into it.

Jangles...... I wana see the ke stylin around the track, If u bring it 1 day, I will drive it!!! as for the purple ppl eater, might go 1/2 ok. I might suggest some minor setup changes though.

One day when you have a car with some real grunt you'll understand why we do like qr Nod. Its a power track baby, Probably the safest track in the country and ample opportunity to give it the beans.

Noddy Proficient

Noddy

Posted
  • Author
Posted

mmm but what is power with out concequence or controll or handling? Obviously a track that is a series of drag strips linked with corners that offer little in the challenge department suits some cars and drivers. When Paul goes back to Lakeside give me a hoy and we will see how my lowpowerd GTST stacks up with the big power GTR's on what is a power track with the forementioned inclusions.

hrd-hr30 Grand Master

hrd-hr30

Posted
Posted

agree 110% with Noddy. The reasons Noel listed are exactly why we don't like it. Its not technical at all, not challenging and there is very little way for a driver to make up any time over more powerful cars. I go to race tracks for the corners. The more difficult, faster, and challenging the better! Anyway, it probably beats being stuck here at work...

plenty of opportunities to drive Lakeside now Noddy. I'm taking the Sil80 out there again on the 2nd of August for the next Lakeside Open Sprint round which allows unreg and/or race cars. As does the Midweek Sprints - next Midweek Sprint is Aug 20. If you're interested let me know, I'll give you the details of a guy taking group booking with discounted entry fees :pirate:

Harry

FineLine Grand Master

FineLine

Posted
Posted
agree 110% with Noddy. The reasons Noel listed are exactly why we don't like it. Its not technical at all, not challenging and there is very little way for a driver to make up any time over more powerful cars. I go to race tracks for the corners. The more difficult, faster, and challenging the better! Anyway, it probably beats being stuck here at work...

plenty of opportunities to drive Lakeside now Noddy. I'm taking the Sil80 out there again on the 2nd of August for the next Lakeside Open Sprint round which allows unreg and/or race cars. As does the Midweek Sprints - next Midweek Sprint is Aug 20. If you're interested let me know, I'll give you the details of a guy taking group booking with discounted entry fees :laugh:

Harry

You.re missing the point harry. I am in complete agreeance with you on the more technical tracks. I love morgan and when I shut the car up enough I look forward to going back to the lake for the first time in over 30 years.

However, By having a powerful car it simply adds another string to your bow, Tracks like qr become very technical indeed if you can generate enough speed.

Proof positive is the fact that you dont like qr whilst hardcore flat out racers like the giant boys, Evo cam, Darren henig etc etc are there as often as they can be. By having very fast cars they simply add to their enjoyment and versatility.

It aint hard to turn the boost down to go run the other tracks but without some major modification you cant do the reverse.

hrd-hr30 Grand Master

hrd-hr30

Posted
Posted (edited)
Proof positive is the fact that you dont like qr whilst hardcore flat out racers like the giant boys, Evo cam, Darren henig etc etc are there as often as they can be. By having very fast cars they simply add to their enjoyment and versatility.

lol, well the "hardcore flat out racers" can have it!

FWIW The one time I took my Datsun 1200 to QR I was a few tenths faster than one of those "hardcore flat out racers" who was there on the day. I don't know about him, but I was still bored to death with the track despite that time still well and truly being in the 2WD Top 10 a couple of years later. QR simply isn't a challenging track. The fact I was able to go as fast as him in a car I had never driven at speed before, in just 8 laps before the turbo studs came loose, shows how simple the track is to learn. None of the other tracks I've driven have been that easy to get really good times at. QR is Boring.

Edited by hrd-hr30
FineLine Grand Master

FineLine

Posted
Posted
lol, well the "hardcore flat out racers" can have it!

FWIW The one time I took my Datsun 1200 to QR I was a few tenths faster than one of those "hardcore flat out racers" who was there on the day. I don't know about him, but I was still bored to death with the track despite that time still well and truly being in the 2WD Top 10 a couple of years later. QR simply isn't a challenging track. The fact I was able to go as fast as him in a car I had never driven at speed before, in just 8 laps before the turbo studs came loose, shows how simple the track is to learn. None of the other tracks I've driven have been that easy to get really good times at. QR is Boring.

So what times did you run harry?

hrd-hr30 Grand Master

hrd-hr30

Posted
Posted

58.3 in the Datsun 1200 with CA18DET. If anything's going to make QR's corners interesting, its a light short wheel base car with leaf spring rear end.

I expect my 200rwkw Sil80 will be faster. I'll take it there to get a comparison time.

FineLine Grand Master

FineLine

Posted
Posted
58.3 in the Datsun 1200 with CA18DET. If anything's going to make QR's corners interesting, its a light short wheel base car with leaf spring rear end.

I expect my 200rwkw Sil80 will be faster. I'll take it there to get a comparison time.

Farken ROFL! Those guys are all in the 53/55 second category Harry.

hrd-hr30 Grand Master

hrd-hr30

Posted
Posted (edited)

this was 2 years ago Noel. It was faster than him then.

Hennig's best time now after 2 more years of development and going there "every chance they get" is 56.18. No point comparing my $13,000 Datto to $100,000+++ AWD running 55s Noel :laugh:

Edited by hrd-hr30
FineLine Grand Master

FineLine

Posted
Posted
you're saying the only way to enjoy QR is at 53-55 seconds? how would you know anyway???

I wouldnt, I can enjoy qr a lot slower than that. 58.6 in my whale actually. I'm an old man according to most on here but I do marvel when those dudes come hurtling past me and can only imagine how much fun that must be.

Speak to them next time you come to time attack and ask them yourself, They'll tell you how much fun it is.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32 GTR EV? The leaf of the Godzilla's!

      By GTSBoy · Posted

      Yes...but look at the numbers. There is a tiny tiny fraction of the number of Joules available, compared to what is used/needed. Just because things are "possible" doesn't make them meaningful.
    • Butters
      UniClutch

      By Butters · Posted

      Thanks for taking the time to post that ! If anything changes or happens please do update us. 
    • joshuaho96
      R32 GTR EV? The leaf of the Godzilla's!

      By joshuaho96 · Posted

      Somehow Vertimass/Oak Ridge National Labs has figured out a catalyst that can convert ethanol into C9-C10 hydrocarbons in basically a single step without ending up with a bunch of ethylene or similar waste products: https://patents.google.com/patent/WO2023224867A1/en I still don't think anything like this will keep us from needing to transition to EVs regardless along with all kinds of other electrification, but things like this will go a long way towards alleviating the problem of how to electrify things like planes. Renewable diesel is seemingly an easier problem as well, Chevron is already running refineries for the stuff and the primary feedstock is tallow and other waste fats from agriculture.
    • RB2533
      UniClutch

      By RB2533 · Posted

      Ok so I have sorted everything with my uniclutch and  i can offer up a bit of feedback and some things that might help others.    I found problems with factory damper line. Weird shit and had trouble with peddle adjustment    I used this https://au.gktech.com/products/r33-gts-t-skyline-braided-clutch-line?_pos=2&_sid=22b01b9b9&_ss=r Also when adjusting peddle leave a bit of play. You can get into a over stroke condition easy.. Make sure you can push the slave forward after adjusting to confirm fluid can return to master then you will need to pump it up heaps…..not sure why but that’s how it is.    last thing the splined adapter is machined perfectly. If your input shaft is old like mine was I would put a bit of valve grinding paste on it and stroke it like a 15 year old. Just to give it a tad more clearance and to better match it to the spline.    reason is on a near flat shift I have had situation where the peddle returns a millisecond after you lift from the clutch. No slip or anything but I reckon this is due to tolerance on the spline being way tighter than stock clutch and binding for a sec. I think this will go away but also my spline was old. Box is old so I guess I should have checked better. It’s a super neat fit.    it feels light as and holds awesome without any noise    
    • Duncan
      Rv37 400r questions

      By Duncan · Posted

      My Fuga Hybrid is JDM, 2014 model but very similar to the V37 from the looks of things..same platform just physically larger and very comfortab;e
×
×
  • Create New...