Jump to content
SAU Community

Recommended Posts

  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

For me protection qualities far outweigh a few kw...

in any case the variables could not be kept constant enough not to allow for slight variations...diff oil temp,gearbox oil temp,boost pressure,ambient air temp,the list goes on...vince is a nice bloke but this test means sh1t to me .

Link to comment
https://www.sau.com.au/forums/topic/278212-top-5-oil-test/#findComment-4703417
Share on other sites

Not really into it cos they missed a few things like whether they warmed the cars up to operating temp e.g 80+ degrees for the oil and the rpms can never be accurate as your controlling them by foot so each run could be up to 100rpm off.

im glad motul did well though as thats the brand im sticking with and i run castrol edge in my beema.

Link to comment
https://www.sau.com.au/forums/topic/278212-top-5-oil-test/#findComment-4704396
Share on other sites

i ran Repsol sythetic oil in my w/shop for over 5 years, also run it in my go-karts, have found it to be excellent. At the end of the day people all have their favourite, just make sure when you buy an engine oil that it has been API tested which is an independent testing proceedure that tests that the oil meets or exceeds the specs specified. Alot of oils on the shelf at your local auto part store have not had this testing, therefore might not meet the specs specified....it is a round stamp on the back of the container that will have API SJ/SL for example. It costs the oil company a pretty penny to have this testing, probably why they all dont do it. Also dont mix up oil grade with oil viscosity which is a common mistake. Running the incorrect viscosity oil could see you loose performance. while the incorrect grade could cause damage and or blockages in late model common rail diesels.

im not surprised the Castrol performed poorly. Castrol was a swear word in my shop lol.

Link to comment
https://www.sau.com.au/forums/topic/278212-top-5-oil-test/#findComment-4704629
Share on other sites

I did a similar test on an STI once but never released it because the the STI was so in-consistant due to the " self learning" ECU it has.

Even with identical oil temp, air temps and same oil, it couldnt even do a back to back run that was similar ( it had a front mount so heat soak wasnt an issue)

Thats why I dont pay too much attention to these sort of tests. i look at oil pressure under various circumstances, engine wear and the oils condition after track days etc.

Link to comment
https://www.sau.com.au/forums/topic/278212-top-5-oil-test/#findComment-4704751
Share on other sites

These tests are pretty useless, as has been said there are way too many variables that can't be controlled - one of the less obvious (but most impacting) variables being the climate / ambient temperature of the place where your car is driven/stored. Start up and cool down is where a great deal of engine wear occurs.

I use GW Sougi 6000 myself, but I sell the stuff so that's only natural :(

Link to comment
https://www.sau.com.au/forums/topic/278212-top-5-oil-test/#findComment-4704838
Share on other sites

aside from the question mark of the fan being much closer in the nulon test, i'd also want a separate test of each oil run for 5,000km in normal driving and then a UOA done on it. I care more about protecting my engine than 5kw.

Link to comment
https://www.sau.com.au/forums/topic/278212-top-5-oil-test/#findComment-4705431
Share on other sites

What up.

I should be here more, I'm a GTR fan that got lost and bought 3 Silvias

but you love them all :)

ive seen your ns sig

something along the lines of

my family is complete s13 daily, jet200 track and s15 missus car
Link to comment
https://www.sau.com.au/forums/topic/278212-top-5-oil-test/#findComment-4706763
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks, plan is to drain all fluid tomorrow and do smoke test to find out the leak.   Appreciate your help and want to understand how the system work. So cooling is achieved by the long loop not any rad? The diagram seems to suggest it connects to somewhere inside the cabin and I thought that is a cooler inside firewall. If you look at the diagram it seems to show it connects to something inside firewall. I tried chasing it but not easy unless I take loads off   i am confident pump is good as fluid goes in and it gets soft( steering) but as soon as I turn engine off , loads of bubble come to surface and overflow. When engine is on , fluid level is below minimum but when off it shoots off and thinking it is sucking air in. I suspect aluminium pipe may have a crack line or whole   smoke test with no fluid should be a good start and if needed will remove the pump   In addition, the one going under the engine bay is high pressure line and one directly connecting from pump to resorvoir is return/ low pressure?   finally I searched and suggestion is to use dexron 2 but that is discontinued so bought dexron 3 as all research suggest it is compatible and shouldn’t cause any issues/ blow seals. I bought two liter of dexron 3 motul atf
    • Don't worry about. Just don't try to drive hard enough to make boost and you'll be fine.
    • Yes. This has already been said. It is a loop of hardline in front of the radiator. Because.... the pump is on the LHS and the steering rack hydraulic connections are where they always are on a RHD steering rack....on the RHS. The high pressure line goes down under the engine, along the crossmember, like it does on all Skylines. Don't just throw expensive braided hoses/other kits at it. Work out what is wrong and fix that.
    • Still got the afm on the intake, clamps are shut tight, only loose hose is the one that goes from the j pipe towards the IACV, since it's next to impossible to find a factory hose and the barbs are different sizes (I'm still using clamps on this hose to try and help it seal on the iacv side) I've ordered parts to make up the hotside of the intercooler pipes, I'll plumb it in and see what happens in a few days I suppose The turbo's internally gated, can I just unscrew the tension rod to let the gate open?
    • Did this ever go further ? Would love some updated info 
×
×
  • Create New...