Jump to content
SAU Community

Recommended Posts

Hi Everyone:

I'm new to this forum and have had a new R35 for about 3 months now. I think I was the second car in Brisbane so you have probably seen my pearl white R35 around Brissie.

I am looking at possibilities of getting my ipod connected to the sound system so that I can use the turn by turn iphone App as my GPS and have already spoken to Audio Express about it and it doesn't sound that easy so anyone with an idea i'm all ears!

Link to comment
https://www.sau.com.au/forums/topic/278227-hi-everyone/
Share on other sites

G'Day Robert,

Welcome to the forums. I got the fist one delivered in Brisbane by Morooka Nissan. If it hadn't rained all that week I would have got the first in Australia which is what I was aiming for as I've got the last Australian Complied and Delivered R32. Spewing. There was a Titanum one deliverd right after mine, so maybe you're the third. I think I've got a photo of yours downstairs at Morooka Nissan when I took the first photos of mine.

How are you enjoying the new toy? I love mine :pirate: Haven't had much chance to drive it yet as work has been keeping me busy and had to go into hospital for some corrective surgery recently. Hopefully I'll be able to knock up some more K's over the next few months.

On the iPod doc it's looking fairly bad. If you do some searching in the R35 thread there is one entitled what do you wish it came with or something like that. Some of the guys have already done a bit of work in pulling it apart and all that stuff. They even worked out that the VDU is running Linux. Apparently there is an extra plug behind the centre console that can be used to plug in Aux devices, however it's not that simple from what I've read.

When I've got some spare time (December) I'm going to look into developing a mini USB port for it so I can plug in my phone and run MP3's straight off it as an Aux device. I've got a degree in electronic engineering so I should be more than capable of working it out once I can get my hands on the Australian service manual and work out what this "plug" they speak of does and how it's wired. What I'm really aiming at is to develop an interface (mini USB) that will allow me to stream any media from Windows Mobile so I can run video as well as audio. I will get around to this at some point just to prove if it can or can't be done. I'm going to need to find someone with a cobb access port so I can dump the contents of the VDU computer and go through it line by line and work out what needs to be changed or added to the code. This isn't an easy task and will take a few weeks on it's own. At a minimum I'll need to add an extra button on the VDU screen to access the port. Then there is the question of wrtting (I'd rather convert) the extra code required to stream data to it. If I can't do it I know tons of code monkeys that can.

Anyway have a look in the forum and see what you can find. When I get around to my project I'll inform people how the progress is.

Enjoy.

Stuart

Link to comment
https://www.sau.com.au/forums/topic/278227-hi-everyone/#findComment-4702969
Share on other sites

Here's the photo I was thinking of.. Is this yours..? To the right behind mine which is the super silver at the front of the picture.. Morooka were talking about arranging a QR day, either way I'm good all I need is a few weeks notice to ensure I haven't got something else booked. Todds problably too busy selling 370's..

I really want to get it out on a track to see exactly what it can do. The best I've had so far is a very angry drive through the hinterland about a month ago.. Loved it.. She responds very well, puts her nose down when you ask her too and just does what she's told.. If only I could find a woman that good.

post-7530-1247060049_thumb.jpg

Edited by limitless
Link to comment
https://www.sau.com.au/forums/topic/278227-hi-everyone/#findComment-4703848
Share on other sites

Here's the photo I was thinking of.. Is this yours..? To the right behind mine which is the super silver at the front of the picture.. Morooka were talking about arranging a QR day, either way I'm good all I need is a few weeks notice to ensure I haven't got something else booked. Todds problably too busy selling 370's..

I really want to get it out on a track to see exactly what it can do. The best I've had so far is a very angry drive through the hinterland about a month ago.. Loved it.. She responds very well, puts her nose down when you ask her too and just does what she's told.. If only I could find a woman that good.

Hi Guys:

Thanks for the welcoming note:

I have actually got nearly 6000 K's on the GTR now as I drive it to work everyday.

My last car was the V10 M5 and I can tell you that the R35 would leave it in its dust!

The only issues i have had so far are the strange rattling noises at idle from under the car... I actually recorded them and sent them to nissan HQ in Melbourne and to my surprise they had the top GTR technician in Brisbane a few days later to give a course to the guys up here so I took it to him for a listen. To my relief he took a quick listen to my car and said that this was entirely normal. He then took me into the Nissan HQ in Brisbane and gave me a full presentation on his computer and showed me how the transmission and clutch assembly is actually dry sumped so at idle you do hear the teeth of the engaged gears meshing! He also showed me some great video of rash testing of the GTR and it actually performs very well in these tests.

The only other issue appart from the lack of Aux input is the way the rear of the car gets so bloody dirty!!! Only a few hours drive and the rear of the car is filthy...

Regarding the inputs , Stuart you seem to be onto a great idea there. I'm also an engineer but I will leave you to figure that stuff out...

I was pretty disappointed about the lack of GPS and Aux inputs when I got the car so I have an iphone holder in the car now which basically just charges my iphone. I have the turn by turn application which converts it into a very useful GPS navigation but now my problem is that the insertion of the phone into the holder automatically mutes the sound so I cant hear the spoken directions!!

Back to the car however I would look forward to a day at the track so if anyone is doing this then I'll be in.

Just remember however that track days are pretty harsh on tyres so we had better be sure there are some spares around if we need them!

Link to comment
https://www.sau.com.au/forums/topic/278227-hi-everyone/#findComment-4704276
Share on other sites

Regarding the inputs , Stuart you seem to be onto a great idea there. I'm also an engineer but I will leave you to figure that stuff out...

Make that another Electronic Eng on here, (with a gunmetal 35), as well guys and I'm happy to assist when you get into the guts of the AV system. Oh and I just had a look at a JDM display and is it just the font or is the resolution of it better than on the ADMs?

David

Link to comment
https://www.sau.com.au/forums/topic/278227-hi-everyone/#findComment-4712673
Share on other sites

Make that another Electronic Eng on here, (with a gunmetal 35), as well guys and I'm happy to assist when you get into the guts of the AV system. Oh and I just had a look at a JDM display and is it just the font or is the resolution of it better than on the ADMs?

David

From what I've read the JDM's have a better resolution.

Link to comment
https://www.sau.com.au/forums/topic/278227-hi-everyone/#findComment-4713308
Share on other sites

Hi Robert, welcome,

Great to hear another fellow r35 owner.

What are your impressions of the car,

given that youve been driving her for a while , apart from the ipod connection , have you had any problems with the car?

Thanks for the welcome GUNR35.

No I haven't really had any problems at all as such. It is quite a difficult car to reverse even apart from the poor visibility particularly in cold weather as the diffs lock the wheels quite a bit and if you you reverse and turn at the same time it isn't a very smooth ride.

I had to do this the other day backing out of a driveway up a hill and turning hard.... it wasn't nice!

I find that the car still surprises me a lot with its vicious acceleration. I think my son got it right when he suggested that its not really a smooth acceleration but rather more of a slingshot experience was a better way to describe it.

I am interested to read about the supposed improvements in lubrication with the Willall racing oils over the Nissan oils and it seems that they are significantly better and i'm wondering if i could ask Moorooka Nissan to use this at my 10k service ... I wonder if that will void my warranty??

Link to comment
https://www.sau.com.au/forums/topic/278227-hi-everyone/#findComment-4715247
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah no bearings, just slip fit.  Would be a reasonably challenging but not impossible job to modify it to run bearings but I'm hoping that's not necessary as I may have well built one myself if I end up spending hours modifying it!
    • Brumbys with good shells are bloody expensive, I've looked at 2 "cheaper" cars, and walked away from both,  plus after some research spare parts are fairly sparce I'm starting to think that I missed the boat on finding a clean one that is straight (ish) and without alot rust I'm starting to think about a old Hilux as panels and other parts are much more available as they sold tens of thousands of them I use to be indecisive but now I'm not sure
    • A Brumby would probably fit a big metal toolbox in the back... this is how it begins  
    • Picked up a new OEM boot seal for the MX5 today as the old one got ripped a bit by me being a idiot by seeing if I could fit a large metal tool box in it, it didn't fit, and ripped the seal with the corner of the tool box I am still waiting on time to get the cams and new balancer installed, as well as the repairs to the boot Time will not be an issue soon though
    • I was more thinking so it doesn't flop around as much rather than for rotating it. Once you have the balance right, it should rotate well enough, depending on how much resistance there is on the pivot. I think you said the pivot point was on a bearing though didn't you?
×
×
  • Create New...