Jump to content
SAU Community

Turbo Dose/flutter?

syfon

By syfon,
in Western Australia

 Share

Recommended Posts

syfon Veteran

syfon

Posted
Posted

Hey guys,

last night on the cruise a black r32 was next to me and kept 'dosing' his turbo, making the tu tu tu noise.

It sounds like turbo flutter but the sound is much much louder and slower sounding.

I read somewhere on the net that to get this noise u need to have a straight pipe coming off the front of the turbo and either block off your BOV or completely remove it.

Does anyone know how to achieve this sound from your turbo? I am aware that some people think or bad for the turbo etc, but i am not worrying about that at the moment.

If anyone could advise me how this sound is achieved it would be awsome :laugh:

Link to comment
https://www.sau.com.au/forums/topic/278235-turbo-doseflutter/
Share on other sites
  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Posted Images

dose_it Enthusiast

dose_it

Posted
Posted
Hey guys,

last night on the cruise a black r32 was next to me and kept 'dosing' his turbo, making the tu tu tu noise.

It sounds like turbo flutter but the sound is much much louder and slower sounding.

I read somewhere on the net that to get this noise u need to have a straight pipe coming off the front of the turbo and either block off your BOV or completely remove it.

Does anyone know how to achieve this sound from your turbo? I am aware that some people think or bad for the turbo etc, but i am not worrying about that at the moment.

If anyone could advise me how this sound is achieved it would be awsome :laugh:

Yep thats right just disconnect your

Blow off valve.. It may leak a little tho depending on type.. And just have a different intake pipe.. Theres a full how to on the calais turbo site for the vls.. Gotta love that sound..

syfon Veteran

syfon

Posted
  • Author
Posted

I've got the stock BOV on my car, and i have replaced the standard gasket with a "solid" tin gasket so when the BOV goes off it cant vent to intake, therfore forcing the air back thru the turbo. But how do i get it real loud like that r32 last night?

R33Matt Collaborator

R33Matt

Posted
Posted

If you want a cheap and easy way of getting flutter you could use a Coke Can, lol. I did this with my car and it works perfect.

You just cut the Can open, take the BOV off, cut the Can to the same shape as the BOV, drill 2 holes in the Can for the BOV bolts, put the piece of Can in between where your BOV bolts onto the pipe and done. :laugh:

The BOV is still on there and all the hoses are still hooked up but the BOV is blocked off. The Aluminium is heaps strong enough to block it off.

Oh and you will also need a Pod Filter

Have fun! :laugh:

Samon Proficient

Samon

Posted
Posted
If you want a cheap and easy way of getting flutter you could use a Coke Can, lol. I did this with my car and it works perfect.

You just cut the Can open, take the BOV off, cut the Can to the same shape as the BOV, drill 2 holes in the Can for the BOV bolts, put the piece of Can in between where your BOV bolts onto the pipe and done. :laugh:

The BOV is still on there and all the hoses are still hooked up but the BOV is blocked off. The Aluminium is heaps strong enough to block it off.

Oh and you will also need a Pod Filter

Have fun! :laugh:

Even easier way? You take off the little piece of rubber hose that goes from the outlet of the BOV to the solid pipe which goes to the intake, shove a coke-bottle lid down about halfway, and put the hose back on as it was. The air can't get out because of the bottle lid and it still looks stock!

shaunvlc Enthusiast

shaunvlc

Posted
Posted

or you could do it the proper way which is easiest if you have a fmic. Relocate the afm to the I/C piping, probably just before the cross over pipe would work best and then that gives you more room and can make any sort of intake you would like as it only needs the pod on the end.

I would be using a piece of 3" pipe with the pod on the end that way the pod will go straight onto the end of the pipe and all you will need is a 3" to 2 1/2" reducer (silicon hose) to attach the pipe to the front of the turbo. 2 1/2" pipe gives you that real high pitched annoying flutter/dose. 3" would be more mellow and less high pitched.

Of course the bov has to be blocked/removed. It's a lot of stuffing around for a sound that isn't that great and get's very annoying. But, each to their own. good luck with it.

shaunvlc Enthusiast

shaunvlc

Posted
Posted

also one other thing. Im not sure what you would need to do with the breather hose that is attached to the stock intake. I'm not sure where you would re locate that, the plumb back pipe is obviously out of the equation now as you wont be using your BOV.

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • LaurelPWR
      Forced Performance Hta Turbos

      By LaurelPWR · Posted

      Dredgggggeeee time; I have recently finally started driving the car. It sat for so long that the fuel tank gave birth to rust sludge and blocked my lift pump sock and one of my walbro 460's and left grime, rust chunks and muck all through the surge tank and system. I decided to commit and pull the trigger on an oem r32 gtr fuel tank and Frenchys twin 460 / sender / surge tank hanger combo and all new larger lines and fittings etc, also boost doc heater hose kit / new heater core and a heap of other bits and shits like wideband sensor installed in the dump and Syltech iacv + lines and all wired and added to current tune. now having lightly driven it a couple times without issue, I can happily report on the hta3076 in its current tune. still no boost control switched on, 20psi gate springs, car makes 22psi at 3200rpm in 6th gear with 30-50% TPS from cruise at 100kmh. Going by the old graph, this means it should be making 300-325whp at the same numbers above. Very very responsive setup under true road driving loads. all that's left for the build is body loom + PDM, finish the remote aircon setup, install carbon fibre parts and go for full tune and 30psi. the 315 rear tyres are now performing like they're 195's, wheel spin in any gear at almost any rpm, whereas my previous setup hooked up in 3rd no issue, albeit Nt01's back then / RB25 5spd vs (new) old date r888r's Z34 6spd now, + obviously all the support upgrades I listed in the quoted post above. car sits at 1-3psi on cruise at 100kmh, expectations totally exceeded and I'm beyond stoked with all this so far. IMG_4848.mov
    • Shizu
      Sheraaz's R34GTT Build

      By Shizu · Posted

      Thanks mate.
    • TurboTapin
      Crank Motorsports Front Axles

      By TurboTapin · Posted

      I've also been eyeing their rear axles for my car. I purchased seat mounts from them about 7 years ago and they were hot garbage so I've been a little wary about purchasing them. With that being said, please buy them and get back to us haha. 
    • Shizu
      Sheraaz's R34GTT Build

      By Shizu · Posted

      Can a moderator please move this into the right category.. I've accidently put this into racing build thread 🤦🏽‍♂️
    • Shizu
      Sheraaz's R34GTT Build

      By Shizu · Posted

      Being a manual, we very quickly ordered new R34 gearbox (From Nissan) and remaining parts from Kudos motorsports. Would highly recommend the team there. Ultra helpful and quick to share advice and upgrades. We are in the middle of taking the Auto out (Genuine 94,000/kms) and putting the Manual in this weekend. Part 2 of the build will include likely a Plazaman Intercooler and Plenium, Hks Exhaust with Tomei Dump (ordered).
×
×
  • Create New...