Jump to content
SAU Community

Recommended Posts

Nissan SKYLINE R33 coupe GTS25T M-Spec (TURBO,5speed manual)

92000km on clock BUT only 35000kms on all parts including engine(RUNNING rb26 FOR 55000kms)very low KMs with Series 2 Engine in a PERFECT CONDITION/PERFECT COMPRESSION TEST RESULT(new engine condition as only 35000kms on that), Service every 5,000kms with best oil(Royal Purple all the time). I fully Take care of the car as a real SKYLINE LOVER, Car with no leak at anywhere, nice and tight, very reliable stock car. The most smooth car around R33s, no trouble with police at all. Best BASE for further modification. Nice street set up, Make 240hp on wheels, With intercooler + exhaust with tune can make 280hp on wheels easily. Selling for saving money to get a SKYLINE GTR.

New PIRELLI grip per4mance wide tyres

New Service with Royal Purple oil($109) and Ryco Filter, done 100km ago

ENKEI RACING WHITE wheels 17' ($2500),

New Gear Box($1500+fitting)

New Excedy Racing Clutch($1300+fitting)

New Belts

New Brakes

Custom Dash

Custom front bar and interier, LED Blue parker light.

Defi Turbo Boost Gauge with sensor ($380+fitting)

Defi Water Temp Gauge with sensor ($350+fitting)

Defi Control Unit with wiring kit ($150+fitting)

GTR REAR SPOILER with twin GT fins($700+Fitting)

SKYLINE FLOOR MAT($400)

Warbo 550HP FUEL PUMP($380+Fitting)

TRUST FMIC WITH PIPING KIT, ($500, Haven't installed yet)

APEXI turbo timer ($130+fitting),

APEXI pod air filter with air flow meter($110)

GREDDY PROFEC B SPEC II boost controller

(HOLD BOOST PERFECTLY ALL THE TIME)($790+custom install)

Front Strut Braces($150)

Stock BLOW OF VALVE

2 Pin KENWOOD CD/mp3/MD player,

Kicker 6930 6*9 Speaker nice and clear ($220 incl fitting)

Climate control air conditon, /Central locking /Power window, AUTO WINDOWS Closer

HICAS /Power steering/Air bag.

DRIVE AS NEW, MUST TEST DRIVE TO FEEL AND BELIEVE!!!!!!

COME WITH ROAD SAFETY CERTIFICATE AND 3 months REGO!!!

ALL INSPECTION WELCOME.

Price$12,900 NEG

with REGO, NO MORE TO PAY!!Drive away. LOCATION: RUNCORN, QLD, 4113

For more detail or more pictures

Call Cameron on 0422171390

Email: chenyin5248@hotmail.com

Edited by skylinelover

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...