Jump to content
SAU Community

Recommended Posts

Hey,

I'm currently parting out a R34 Skyline Sedan.

Here's some of the parts currently up for grabs. Please DO NOT ask me to ship any large parts as it'll cost an arm and leg to ship from NZ - AU. :blush:

PM me if your after any other parts

NOTE: All prices are in AU dollars

A) Airbag system (complete) Tiptronic steering wheel / Passenger airbag / Airbag computer $500

B) Air con unit (damaged face plate but still working fine) $60

C) A pillar trim + boost gauge (not branded) $80

D) Centre dash vent $80

E) Centre console (with leather lid / compartment) $120

F) Complete set (5x) seat belts inc. bolts and buckles $200

G) Door sill trims $80

H) Speedo cluster surround $60

I) Tiptronic shifter surround + ash tray $80

J) Tiptronic cluster, approx 110,000 km's $150

K) Left / Right Non-Xenon headlights (left headlight has some small lines) $1000

L) Left / Right wing mirrors $160

M) Monsoon / whether shields / wind deflectors (left rear is cracked but glued back) $100

N) Rear wiper + motor + loom $100

O) Tail lights (tinted lenses) $160

P) JBL Speakers + Tweeters (6.5" / 2-way / 75W RMS / 225W peak) $160

Q) Glove box $80

A) airbags.th.jpg B) airconunit.th.jpg C) apillartrimboostgauge.th.jpg D) airconvent.th.jpg

E) centreconsole.th.jpg F) seatbelts.th.jpg G) doorsillcovers.th.jpg H) clustersurround.th.jpg

I) tiptronicshiftersurroun.th.jpg J) cluster.th.jpg K) 48396374.th.jpg p1000506.th.jpg

L) 83223873.th.jpg M) winddeflectors.th.jpg N) rearwiper.th.jpg O) 70568454.th.jpg

P) jblsoundsystem.th.jpg Q) 42715815.th.jpg

Edited by Chang

Alright here's what has been sold thus far:

- R34 Headlights SOLD

- R34 Left window switch SOLD

- RB25de Neo ECU SOLD

- All exterior badges SOLD

Everything is still up for grabs :P

Edited by Chang

Hi mate, can I just take the arm-rest and handbrake leather cover separately? Do they fit on 2 doors GTT? If u do post, plz PM me the price including post to SA 5072. Need them asap! Cheers! :(

hay buddy

how much for just the ash tray (no surround just the ash tray)

and the a/c control plastic cover (just the cover please mine cracked when i took it apart for paint dont need the buttons and actual unit from behind it)

sent to 3032 melbourne

cheers

julz

Rear wiper + motor + loom SOLD

Tail lights (tinted lenses) Payment Pending

Still heaps of parts available. Just ask :down:

Edited by Chang

A) Airbag system (complete) Tiptronic steering wheel / Passenger airbag / Airbag computer $500

C) A pillar trim + boost gauge (not branded) $80

D) Centre dash vent $80

E) Centre console (with leather lid / compartment) $120

F) Complete set (5x) seat belts inc. bolts and buckles $200

H) Speedo cluster surround $60

I) Tiptronic shifter surround + ash tray $80

J) Tiptronic cluster, approx 110,000 km's $150

M) Monsoon / whether shields / wind deflectors (left rear is cracked but glued back) $100

O) Tail lights (tinted lenses) $160

Q) Glove box $80

B) Air con unit (damaged face plate but still working fine) $60

G) Door sill trims $80

K) Left / Right Non-Xenon headlights (left headlight has some small lines) $1000

L) Left / Right wing mirrors $160

N) Rear wiper + motor + loom $100

P) JBL Speakers + Tweeters (6.5" / 2-way / 75W RMS / 225W peak) $160

Stereo surround + brackets

RB25de Neo ECU

All exterior badges

Car will be sold this weekend. So any other parts that are not listed here, it'll be your last chance to ask. :merli:

Edited by Chang
  • 3 weeks later...
  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
    • The bushing has failed, not all that uncommon for a car of this age.  Any mechanic should be able to push in a new bushing for you, or you can probably buy the entire lower control arm, complete with bushes.
    • Could you not use "thermal" spacers to give the clearance, like the ones I used between the blower and head? That raised the manifold height by around 10-15mm Albeit the ones I used were for cathedral ports, but I assume they have similar for rectangular ports????
    • Thanks Paul I reached out to Autotainment but they no longer work on JDM cars as the guy who used to do the work moved on and is no longer doing that kind of work. I am talking with Level Up Audio though.
×
×
  • Create New...