Jump to content
SAU Community

Recommended Posts

hey all

Just brought my first Gtr, r32

power Fc

Nismo upgraded turbines (T25/T04B 0.64) with metal turbine blades

HKS Turbo dump pipes & front engine pipe

Tomei sump baffle

Tomei type A cams

Jun cam gears

N1 oil pump

Whats safe boost for a Rb26dett what these mods. My boost controller is a Blitz SBC - i-D SPEC - R. If im driving long in say 2nd gear. And roll on boost to 7.3-5k rpm. My boost controler says peak boost 19.5psi. when i got it set on High boost setting. on the other setting it dosent boost past 16psi.

I just dont no how much i can lean on it. I have all the recipes for the tuning it was tuned 3months ago for 19psi. But dont no i dont want any probs any time soon. just making sure you no.

Have many people boosted there rb26s unforged that high? if its high at all. whats high boost for a non forged rb26?

sorry if this sounds like a noob question. Im new the the GTR/rb26 seen.

cheers for any help

Link to comment
https://www.sau.com.au/forums/topic/278661-safe-boost-r32-gtr/
Share on other sites

I am no expert but 19 - 20 psi on a stock engine should be fine as long as your tune is good, i.e. not leaning out. From experience the 32's don't like being held over 7500rpm for too long, hece the semi redline at this figure.

I would of thought a stocky should be good for around 25 psi with a safe tune and a good driver?

Just remember the stock AFM's resolution max out at around 400-410 RWHP- Tuning res after this isn't necessarily brilliant. Tuning is the key to keeping it safe, but you'll also hit a point where the extra boost adds heat but not power.

Just remember the stock AFM's resolution max out at around 400-410 RWHP- Tuning res after this isn't necessarily brilliant. Tuning is the key to keeping it safe, but you'll also hit a point where the extra boost adds heat but not power.

Good point, I had not passed posting that as a 'given'. But his set up doesn't appear to have them.

Oh and budget for a rebuild at some point or another regardless, LOL.

sorry to hi jack thread but just a quick one.

I have stock turbos on my 32 gtr looking at bumping them up a bit i have herd that they are dodgy above 1 bar is this correct?

If they were new(er) I'd say 1 bar no worries, but since they are older there is a risk in doing that.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No idea about the remote start part. If the V37 nav is anything like other Nissan JDM vehicles, you can't get the factory Japanese nav working in australia, a card from a different car almost certainly won't work, those cards are usually matched to the serial number of the DCU.  You could be possibly swap out the components from a AuDM Q50 to get it working, but if this is a new model (2021+) 400R, then you will lose the newer features like ACP/AA.  That said, if you have ACP/AA, just use google maps.. I assume a band expander would be required to get the local radio stations, but don't forget the Japanese FM band is narrower than ours, so you still might not be able to receive all Australian stations. I can't see any reason the tyre pressure sensors won't work here, there is the sensor unit inside the rim and the receiver nearby in the wheel well.  I have never had to change the batteries on my 2015 Q50, so I assume they last quite a while.  A straight battery change shouldn't need them to be re-registered as they are the same unit, that should only be required if you replace a sensor with a new one.   Word of warning, if you ever go into the 'secret' diagnostics mode on the main screen, DO NOT EVER do a 'reset' in this menu, it will erase all of your model specific data in the DCU and you will need a trip to a dealer to re-program it all, which would be particularly painful being an import.  This applies to the AuDM Q50 too.
    • There is a known issue with the mix door motor on the Q50 which causes these symptoms, not sure if it is common on the Y51 though.
    • That ring thing is interesting how it's holding everything together 
    • Hey guys. I have a 400R on its way to Australia from Japan currently and have a few questions I’m hoping others may be able to help with.   Wondering if anyone here has had any luck getting the Sat nav unit to work in Australia!? Assuming the Stereo is as simple as a band expanded and tv won’t work?  Seeing as they’re based off a Q50 which is Aus delivered is there any way to link that system to the nav? Nav modules and head unit are different part numbers and appear slightly different at the rear with plug ins etc. can I put my xtrail sd card into the rv37 and will that convert the maps or update to Australian? Has anyone got any advice here?     also has anyone fitted the factory remote start and Security system once it’s landed in Australia? I put an enquirey to Nissan Japan in via a third party, and they suggested it needs a Nissan Japan dealers device to setup and couldn’t guarantee if one here could do it or not. They can supply and I can physically fit it but to setup I would need a dealers device. Any information here would be appreciated also. I’ve seen one here with it fitted already prior to leaving Japan at a dealer/inporter, so clearly passes compliance and works when fitted Japan and doesn’t need changing here.      also, does the tyre inflation sensors work here? Does anything change with them when the vehicle arrives? Where are they actually situated? I’ve read they have batteries and they need to changing at times and seems like resetting involves the nav system?    any help here would be appreciated and any other aust specific information to help would be great. Looking forward to see what the current generation skyline is like and eager to see how many of the gadgets can be utilised here.  Thanks in advance 
    • Do need to take it with a pinch of salt. One of the adapter failures, they clearly had setup issues with the flywheel.  One of the slipping ones I spoke to and it was pretty clear the throwout was riding, rather than fix, just swapped to a new clutch.    These clutches are being put in anything from 5k offroad 4x4 beaters, GR yaris, 500hp commodores to 1200hp barra monsters. Bound to be some issues in some of them when they are not a simple bolt in affair due to the changes in height.    There is a lot going on in this picture and unless I did the job myself no way to tell what really happened. 
×
×
  • Create New...