Jump to content
SAU Community

Recommended Posts

I think you will find is $100 per pair

Secondhand yeah around $50-$70

i mean indicators arent really a wearing item like wheels etc,

so they should really hold a decent value still

cam and anyone else if you dont get this pair and still want some lemme know

RiaZ

When you ring for prices on clear indicators do not mention you own a COMMODORE, these tricky blokes tend to rip off trevs who diss their civics etc

the price for them is ~$100 could be $105, i cannot recall.

this is for a Nismo item

now $200 will be for a Nismo item in japan and then shipped over here after the supplier and initial retailer and the smaller store retailer have all made their profits

i would be interested to know who quoted you $200 for a pair though

are they like a new form of clear steel of something....do they flip round to provide a shaved fender look??

FIRE BRINGER i will grab the part number for you and you can order it yourself through nissan in NZ.

ummm...the ones on those links are also flush with the panel....and not $200, and not $35 postage either.

$35 postage is quite a larf. did they send it express air mail via Beiruit or something?

if they must sell, they must sell, but I think that at $200, youve got a better chance of finding a well thought out metaphor.

Originally posted by zanda

$35 postage is quite a larf. did they send it express air mail via Beiruit or something?

:bahaha: :bahaha: :bahaha:

seriously though, i could prolly try get some cheaper ones that are under 100 bucks here in Perth

will get back to you guys later

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • https://www.efisolutions.com.au/coolant-temperature-sensor-bosch-180sx-s14-s15-r33?gad_source=1&gclid=CjwKCAjwzMi_BhACEiwAX4YZUHsCQhbiDT_NC3q5wD9jrzH6Dts9eGSr19NXSDw7x9WVm1sH7G3S4hoCwaUQAvD_BwE this is the one i replaced today
    • I have replaced the larger coolant temp sensor, i do see a smaller one next to it (looks to be just 1 pin) but i assume that is just for the dash? or should i replace that aswell?
    • Check coolant temp sensor ~ symptoms fit the hard hot start/cold start OK scenario --- if sensor goes open circuit, ECU thinks engine is cold and enriches mixture ....works when engine cold, but floods them with rich mixture when hot (Hyundi MAP engines are a bit infamous for this)...
    • OK, starter changed for a spare without much trouble. Neil had kindly left space to get to the top starter motor bolt from above with a long spanner which makes the whole deal much easier, and everything else was neat and easy to get at from underneath. Once the starter was changed everything was good, unplugged the CAS and turned the motor on the starter to make sure everything was free and happy. Onto properly priming the oil and first start. I'd picked up one of these oil prime kit from Boost doc a while back and this was my first time using it.  https://boostdoc.com.au/products/engine-oil-prime-kit?_pos=1&_sid=28c628a65&_ss=r While I'd organised all the fittings to hook it up to my GTR (sump plug to -6 feed and -4 T to tap it in and retain the oil pressure gauge, neither suited on this car as the oil pressure needs to T into 1/8 NPT not -4 and the Aeropro sump has some massive drainplug not that factory whatever it is. So, waiting for a couple of fittings, then I'll prime it and do first start, hopefully next weekend. Other than that going well, there is very little stopping a final alignment, tune then shakedown day
    • Also to mention, i just tested the CAS, seems to be working fine, can hear the pulses inbetween 0 and 180 degrees, another mention aswell, when i let the car sit for about a hour today, i went to start it and it almost fired on first crank, then just completely struggled. Could it possibly be blocked injectors?, maybe allowing a little bit of fuel to seep past allowing it it almost start first crank?
×
×
  • Create New...