Jump to content
SAU Community

Gtr Fuel Pump In Rb20 (32gtst)

Drakey

By Drakey,
in Engines & Forced Induction

 Share

Recommended Posts

Drakey Collaborator

Drakey

Posted
Posted

Hi all,

Just a quick one.

When i bought the car i was told it had a GTR Fuel pump installed.

Im getting some work done soon and all tuned up.

Is there anyway i can check that the GTR fuel pump is in there and not the stock one?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/278759-gtr-fuel-pump-in-rb20-32gtst/
Share on other sites
CEF11E Veteran

CEF11E

Posted
Posted
open the tank, have a look at the assembly in there, the stock one will fit in the bracket without any modifcation, if its a GTR pump it will have had the bottom cut off or bent to fit in

actually that is not right, I have an R32 gtst and I have fitted an R32 gtr pump. it fits in the stock cradle using the stock bottom rubber and the stock filter/sock infact the assembly looks no different from the standard unit.

  • 4 weeks later...
Drakey Collaborator

Drakey

Posted
  • Author
Posted

Had a look in there finally tonight.

All there is is a pump with a hose clamp holding it on and thats it...

surely there is some otherway to tell

Im about to buy a pump and just want to confirm?

Thanks heaps

Sydneykid Grand Master

Sydneykid

Posted
Posted
Had a look in there finally tonight.

All there is is a pump with a hose clamp holding it on and thats it...

surely there is some otherway to tell

Im about to buy a pump and just want to confirm?

Thanks heaps

Hose clamp = non standard pump

Cheers

Gary

TKDRIFT Apprentice

TKDRIFT

Posted
Posted

yea good chance its not standard as most ppl will put a hose clamp around it to hold it in place as most aftermarket pumps wont fit in the stock position.

prettys sure GTR pumps have that round thing at the top for vibrations or sumthin

xRHETTx Mentor

xRHETTx

Posted
Posted

I installed an R32 GTR fuel pump in my old gtst. If you turn your key to start, do you hear the pump priming for a few seconds then switching off?

If you can hear it is prob a gtr pump. I could never hear my gtst pump prime.

You definitly have to modify a gtr pump to fit. I think I used the inlet sock thing from the gtst pump, then had to plastic weld it a bit as it faced the wrong way?

  • 9 months later...
Samuel Leonard Rising Star

Samuel Leonard

Posted
Posted
I installed an R32 GTR fuel pump in my old gtst. If you turn your key to start, do you hear the pump priming for a few seconds then switching off?

If you can hear it is prob a gtr pump. I could never hear my gtst pump prime.

You definitly have to modify a gtr pump to fit. I think I used the inlet sock thing from the gtst pump, then had to plastic weld it a bit as it faced the wrong way?

i'm pretty sure mine is a stock gtst pump and i can hear it... it's actually fairly loud. but who knows, i was told mine was very stock, only to find out my 32 gtst has an r33 turbo, hks actuator, full 3 inch exhaust and stainless steel twin pipe dump. also a hks front mount (knew it had a front mount obviously just not hks) so it could be a GT-R pump...

  • 2 months later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • DRoc81
      Shifting questions

      By DRoc81 · Posted

      This was a huge help.  We followed the steps,  although shifting into 2nd was actually into 3rd for us,  and 1st was into 2nd ( steps 9 and 11) .  The long flash was the 4th flash.  So shift solenoid A is possibly the culprit.  Is this inside the transmission itself? Or is it accessible by just front the pan? Or is it bolted to the outside of the transmission?  Thanos for your help everyone
    • sunsetR33
      ugently need expert / experienced opinion

      By sunsetR33 · Posted

      Can you enlighten me on your best practice regarding these hoses? I don't wanna make the same mistake if you already got a better solution.
    • sunsetR33
      ugently need expert / experienced opinion

      By sunsetR33 · Posted

      I have some silicon hoses already, for example engine to watercooler. But yeah, I get the sentiment. The lower intercooler silicon hose is drippy too, despite not being very old. Does anyone except Nismo make these same lines out of rubber? Long term I think they'd be the better replacement, especially since the car won't live as hard a life anymore as in the past nor be driven as often.
    • sunsetR33
      ugently need expert / experienced opinion

      By sunsetR33 · Posted

      I know most issues are just age related. But for example the turbo oil drains, there is dash adapters for these and you can just make a braided teflon line for them and (probably) never have them leak again. Also not terribly expensive. Can you even get the factory hardlines from new? Or are they repairable if they break?
    • sunsetR33
      ugently need expert / experienced opinion

      By sunsetR33 · Posted

      I know it'd be much much easier with the tool. I hope I can find one that won't take 3 weeks to get to me an isn't a "Asian models kit" that has tons of (to me) useless adapters for a load of cash.   It's a summer project/fun car. I do wanna enjoy it, without endless downtime over and over. So yeah I would even go and buy an engine crane + stand to save myself the trouble of hard to reach or unreachable places going bad later on. Would also be a good opportunity to put on a Fluidamper, renew the mains seals and stuff like that. I have some money on the side that I can use for that, what I wouldn't want to or be able to do is let everything be done by a shop or have my engine completely rebuild right now. I intend to do most of the "doable" jobs myself. Pulling an engine can't be that hard, can it?
×
×
  • Create New...