Jump to content
SAU Community

Recommended Posts

R34 GTT Bomex front bar----i did use this for track days but not anymore needs TLC

$50

R34 standard white bonnet---slight dint near passenger side headlight nothing a got panel beater couldn't pop out see photo's

$200

R34 OEM style carbon fibre bonnet --- bonnet lifted while driving (not me the old owner of the bonnet) not too damaged again used this for track days etc not too badly damaged just want it gone...has bonnet pin latches but ill have to find the pins

$200

WORK EUROLINE wheels 18X8 unknown offset just a pair EX_DRIFT WHEELS no buckles just gutter rash...no tyres ive got the centre caps too need TLC also

$250

CONTINENTAL CONTACT SPORT X2 ------235/45 R17 97W still roadworthy just got too many tyres at home for skids

$30

BRIDGESTONE RE050 A ---- 215/45 R18 89W still roadworthy just got too many tyres at home to do skids on --

$40

R33 factory rear strut brace--- dosnt fit R34 found out the hard way

$100

19" wheels a set of 4 one has gutter damage still holds air 8" wide unknown offset front tyres are just roadworthy the rears are still good!

235/35R19 been sitting around for ages! want them goneskies

$300

R33 JIC coilovers NEED REBUILD was going to get them rebuild to a custom level never ended up doing it .....2 are leaking the other two are ok unsure what too been that long want to sell them as a full set

$150

R34 GTT rear wheel bearings and hubs suit..i upgraded to GTR rear end no longer need prefect condition replaced the bearing about 5000kms the changed the whole rear set up...prefect for a 5 stud conversion

CONTACT ME VIA SMS 0401035221 or PM

TOM

Edited by tommygr34
Link to comment
https://www.sau.com.au/forums/topic/278862-garage-sale/
Share on other sites

Hi mate, very interested in some stuffs! Plz send me close pics of these three:

R34 GTT Bomex front bar----i did use this for track days but not anymore needs TLC

$50

R34 standard white bonnet---slight dint near passenger side headlight nothing a got panel beater couldn't pop out see photo's

$200

R34 OEM style carbon fibre bonnet --- bonnet lifted while driving (not me the old owner of the bonnet) not too damaged again used this for track days etc not too badly damaged just want it gone...has bonnet pin latches but ill have to find the pins

$200

Plz help me with this ASAP! Plz send me pics to my email [email protected], or contact me on 0433566067

Cheers

Edited by Obelisk
Link to comment
https://www.sau.com.au/forums/topic/278862-garage-sale/#findComment-4710875
Share on other sites

19" wheels

post-47108-1248002187_thumb.jpg

GTT rear hubs

post-47108-1248002230_thumb.jpg

coilovers

post-47108-1248002262_thumb.jpg

greddy gauges not wiring harness or sensors gauges slightly dinted ($200 OBO wont separate)

post-47108-1248002305_thumb.jpg

bomex bar

post-47108-1248002422_thumb.jpg

r34 bonnet damage

post-47108-1248002570_thumb.jpg

safety21 front hoops and front crossbar,,, i didn't use these for my car i just used the rear half of the cage, bolts, mounting plate everything you need just not the back half of the cage ($250)

post-47108-1248003145_thumb.jpg

r34 L.E.D taillights (unknown brand) good condition swap plus cash ($200 ono)

post-47108-1248003311_thumb.jpg

MORE PARTS COMING AND PICS!!!

Link to comment
https://www.sau.com.au/forums/topic/278862-garage-sale/#findComment-4723207
Share on other sites

  • 3 weeks later...
  • 4 months later...

BUMP still have

R34LED taillights

SM greddy gauges

R34 OEM style carbon bonnet

19" wheels

R34 rear hubs

contact me on 0401035221 SMS me during work hours i cant answer normally and ring me after 5

Link to comment
https://www.sau.com.au/forums/topic/278862-garage-sale/#findComment-5032807
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Coming home late at night and driving past the police is the only reason i need one haha And yeh, definitley needs a switch to quickly enable it, dont have time to be getting my phone, opening an app, waiting for it to update etc before being able to make the change
    • Because it is financially convenient for them lol. Why wouldn't they want to give you the lowest possible valuation for your car?
    • Yep. @Duncan also shannons they will rip you dry and will be probably limited on how much you can drive. Also keep in mind that you always have to have it garaged with Shannons, with enthusiasts as per their PDS you can have it 2 times per week on the driveway for example. 
    • I had a generic 4" Varex rear box on my old V8, worked a treat for sneaking home late at night, it was as quite as stock when closed The car was "fairly" loud when open as it consisted of 1" 7/8 headers to 3" catted Y pipe, to 4" single, it did have a resonator in the mid pipe and only the Varex out the back I also hard wired in a Varex dash mount switch, as the key fob thing is a pain to use when driving I wouldn't recommend giving the beans when it is closed though as it creates a large restriction in the exhaust  It also can in very handy when pulled over for "random" breath tests or just cruising past the constabulary   
    • Here is the before and after of the scraping/sanding of the IC pads on the tachometer board for the fix mentioned in this thread. And yes it worked fine after. Just a note if you change any components on the board the tach calibration can be wrong showing the wrong idle etc...only problem is once it is installed back in the cluster you can't get to it to adjust...ouch! My fix was to cut out the calibration pot (the blue one) from the board and run it with two wires to the fuse panel under the dash where I could adjust the idle calibration once everything was installed. And yes I soldered everything up again including the half soldered components either side of the IC in my photos                                
×
×
  • Create New...