Jump to content
SAU Community

Recommended Posts

u can get it for around $500 or less if u get it off nissansilvia.com, or even a trader off here will have a deal that is cheaper than what u have been quoted b4. off the top of my head for the same clutch u mentioned it was about $496 + $20 postage off ns.com

" Pressure plates and clutch plates provided with these clutches are oem bundled released direct from Daiken, RPM or Seco and are not Pink or Purple like the boxed Exedy items unless listed as Exedy."

Make sure you get EXEDY .. I only use the pink clutch covers with pink cushioned button clutch plate

I'm running 360hp in mine with a twin plate clutch, handles beautifully. Though every once in a while it does grind a little heh, fkn noisy twin plates...

Was looking at getting one of these if mine ever fries.... http://www.nengun.com/exedy/hyper-carbon-c...in-plate-clutch mmz.

Tenegah have a deal on supply and fitting of genuine Exedy's

http://www.skylinesaustralia.com/forums/Ex...rt-t279096.html

Be very careful of some of those "too good to be true" prices, as quite often they use some non-genuine parts in there kits.

^^ sounds good to me, am i doing any damage to my car driving it with a very slipy clutch? dont have the funds to buy 1 for a couple of weeks

cheers

You won't be doing much damage, but don't drive it too hard. Tenegah will have your standard flywheel faced, so it should be as good as new :D

i remember a thread created by someone who discussed all the different types of clutches with their pro's and con's. anyone know where this has gone???

i need a new clutch for rb20 and heard twin plates faark rb20 gearbox's so researching on whats best

anyway ideas???

I've got an Rb20 turbo 5spd in my ceffy, and i can tell you that if i had a twin-plate, i'd be on the side of the road still. a single plate heavy duty organic is the go for that particular gearbox.

ring auto clutch in osborne park. got one of his clutches behind my 25, feals like standard and takes anything stock internals can throw at it for around $300-350 with machined flywheel, thrust bearing and spigot bush

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • OK, so all I can suggest is that - if you have all the parts, and you have all the wiring looms, and you have all the electronic modules, then....it really is just a wiring problem. You likely have a damaged wire, pin, etc, somewhere.
    • Yup, bought this bad boy and hopefully it will be ready to pickup today. Had $5 credit on top of it so it worked out really well!
    • Yeah it is really until until you get a feel for it....then it is easy. Which is no use to you really. I'd buy that torque wrench. One thing from sure, many (most?) tyre shots overtighten the f**k out of wheel nuts, so don't worry if they were tighter when you tried to take them off compared to when you do them up. I've had some crazy tight ones come back from shops, quite apart from the potential damage to the thread, I can't see a smaller person taking the wheel off on the side of the road
    • Hey mate, thread dredging hahah To answer you directly, yes I had my itbs oversized and custom butterflies etc made by EFI Hardware in Sydney back around 2017-2018 if memory serves. My setup had a vast amount of other changes too though, so no direct comparisons unfortunately. i went from oem itbs, HPI manifold and internal gate hks 2835 pro S; to 49mm itbs, cnc port matched Nismo plenum, RB25 Neo lower runner adapter hand port matched, r31house v2 Takoashi MAX equal length twin scroll manifold with twin 38mm tial gates and a FP HTA3076 with 1.01ar twin scroll real hosing. feom power Fc to a link fury wired by 12volt, r32 gtr fuel tank conversion with frenchys twin 460 / surge tabk fuel hanger combo kit, 1659cc injectors, full 4 inch turbo back stainless exhaust, Z34 6 speed, Tomei 2way with 4.3 final drive and a ton of other shit. ive posted elsewhere here with complete run down, but here's a graph from its initial tune with no boost control on, 20psi gate springs only and e85.   7542AE72-DA92-4E0B-8660-B0940FEA7F24.mov
    • On sale mate, $55. Sorted. https://www.supercheapauto.com.au/p/toolpro-toolpro-torque-wrench-1-2-drive/565734.html?utm_content=paidsearch-pmax&gad_source=1&gclid=Cj0KCQjwytS-BhCKARIsAMGJyzqYEnwWmhWf6gxTST_Nz06Gd2VePgyvL7lh6PWrQtbjXTsI6TqSCLEaAuaCEALw_wcB&gclsrc=aw.ds
×
×
  • Create New...