Jump to content
SAU Community

Recommended Posts

Hello,

I recently joined the 93 R32 Gtst Skyline team.

The car has a front mount intercooler, stock boost, 3 inch exhaust and pod.

There are a few things with the car I'm not sure about.

1. when driving along sedately the car's oil pressure gauge shows 0 ... if accelerating it will creep up, and if on the highway it shows 4 .. Is this something to be concerned about or is this normal ?

2. When driving along around 70km/h there is a vibration felt in the wheel and like a humming sound of something maybe rubbing... only around the 70 mark .. any slower or faster and it doesn't seem to be there.

3. when pulling up to a set of lights the idle will drop right down, and quite often stall - seems to be especially when applying the brakes it I slow the car with the gears and pull up the hand brake it will still drop but most of the time with a little rev it will stay running. It has been suggested to me this could be the mass airflow sensor or something? .. does this sound like the problem and will cleaning it with wd40 fix this ?

4. The brake lights seem to stay on when the head lights are turned on.. is this a common problem / easy to fix ?

5. with the above problems fixed is a good idea to get a boost controller and add more psi to the standard turbo.. or should I be doing more to the car before that stage.

Thanks for your help

Johnny

Link to comment
https://www.sau.com.au/forums/topic/279031-new-r32-owner-problems-questions/
Share on other sites

1. when driving along sedately the car's oil pressure gauge shows 0 ... if accelerating it will creep up, and if on the highway it shows 4 .. Is this something to be concerned about or is this normal ?

The Skyline oil pressure sender unit is infamous for failing and showing false readings. If in doubt, replace it or fit an aftermarket gauge.

2. When driving along around 70km/h there is a vibration felt in the wheel and like a humming sound of something maybe rubbing... only around the 70 mark .. any slower or faster and it doesn't seem to be there.

Could be a few things, wheel bearing, alignment, balance, tailshaft bearing, etc.

3. when pulling up to a set of lights the idle will drop right down, and quite often stall - seems to be especially when applying the brakes it I slow the car with the gears and pull up the hand brake it will still drop but most of the time with a little rev it will stay running. It has been suggested to me this could be the mass airflow sensor or something? .. does this sound like the problem and will cleaning it with wd40 fix this?

Could be the AFM, or IAC valve. Clean them carb cleaner. Don't put WD40 anywhere near the AFM!!!

4. The brake lights seem to stay on when the head lights are turned on.. is this a common problem / easy to fix ?

Check your tail light globes, they could be single pole jammed in, I've seen it before. Also check for a short or cross wiring.

5. with the above problems fixed is a good idea to get a boost controller and add more psi to the standard turbo.. or should I be doing more to the car before that stage.

You can safely up the boost to 12-14 psi with the FMIC, pod and exhaust. The stock ECU will cut out at 14psi so keep it to between 12-13psi.

  • 2 weeks later...
The Skyline oil pressure sender unit is infamous for failing and showing false readings. If in doubt, replace it or fit an aftermarket gauge.

Could be a few things, wheel bearing, alignment, balance, tailshaft bearing, etc.

Could be the AFM, or IAC valve. Clean them carb cleaner. Don't put WD40 anywhere near the AFM!!!

Check your tail light globes, they could be single pole jammed in, I've seen it before. Also check for a short or cross wiring.

You can safely up the boost to 12-14 psi with the FMIC, pod and exhaust. The stock ECU will cut out at 14psi so keep it to between 12-13psi.

Most of the problems are now fixed, the idle problem ended up being a few hoses leaking / missing.. has had a full service - all oils look like they had never been changed, changing gears is smooth now .. along with a few other little problems have been fixed.

I have installed a auto meter liquid filled gauge / turbo smart boost controller and it seems like a different car.

I still have the problem with the brake lights with the addition I have noticed now that when the lights are off at night and I press the petal the dash lights come on / front parkers?

Thanks for the advice, much appreciated.

Regards

Johnny

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey lads, reviving an old thread.  As an update, since the last time replied to this thread, ive done mostly suspension. Havent touched the motor except for maintenance. Though upon changing spark plugs, found out i had splitfires pre-installed! Updates: - Got me some stock airbox top cover and snorkel to fit onto the original intake. Should be free of defects - Bought a set of R34 GT-T brakes (not installed yet, going to rebuild + respray in champion blue + white 'Nissan' text) - Bought the last set of bilsteins from @Sydneykid and had them installed. Has been making some sounds on the rear but hopefully should be sorted out after this New Year break. - Regreased front caster rod bushings (poly bushes..) - Rear upper camber arms - Whiteline sway bars (BNF27Z 22mm + BNR11XXZ 24mm).  The rear sway bars are a bit short (ive read 50mm else where) but was still able to get them in.  Anyhows, I reckon suspension is sorted now. Maybe replace bushes (do have a set of front upper control arms from SK not installed yet) but should be okay for now. From now, I'm wanting to start working on the motor, drivetrain etc etc. Still debating on the order to go on and what to buy etc but: - ECU ( Haltech or Link ( Link states that it dont support A/T or AWD functions... Can anyone attest to this? ) - Highflow turbo ( ATR43ss2 ) - Intercooler ( Not decided yet, but cant find many good afoordable ones. Toshi says to opt for crossflow Japanese. Bit difficult this one, unless I get a returnflow Blitz from JJ? ) - Injectors ( Any recommendations ? I do have a nismo FPR ( Thanks SK ) ) - Seats - Tune by either Toshi or DVS To be fair, I did consider just keeping the stock turbo and nistuning it. Sat in a mates stock N, that had something like 200kw, and I reckon that felt more than enough. Maybe I should just go this route ahhaha. Too many choices.... Planning a trip down south, so wanting to just clean things up and make sure it gets to and from in one piece. Anything else specifically I should do before ? Cheers lads  
    • Must be for the car’s lucky charm 🤷🏽‍♂️ She runs fine, but it just seems to take about 1L less. Maybe I’ll have the oil sump dropped at some point to check if there is anything 
    • Hmmm interesting. Mine is the exact same and clearly the right one.  The mystery of the engine oil being full after 3.5-4L continues 
    • Yes I as well would like to find out where I could get some of the seat material with the red or blue small squares in it
×
×
  • Create New...