Jump to content
SAU Community

Recommended Posts

  • Replies 79
  • Created
  • Last Reply

Top Posters In This Topic

Yeah i cant say this is a totally bad thing, i've just never checked how far from the deck a standard skyline is, whats the difference between standard ride height and 100mm??

I do agree in many extents, the amount of idiots i'm seen who join the "drop it and give it 20's" drives me nuts.

I'm just wondering what they mean by permission exactly, does this just mean get an engineers cert, or that they want paper work from the RTA before hand specifically allowing you to have the mod performed.

i thought lowering a car helped improve the handling of a car???

To a certain degree, yes. But there are those out there who go overboard.

I think what they are mainly concerned with is maintaining the geometry of the vehicle.

To stop the fully sic dropped wrx and vl im all for it.

as these punks go 2km over a speed hump and on an angle, like please if u werent such a "fully sic" racer u wouldnt need to drive 2km over a hump on an angle

to that aspect good, defect all these morons

soon we will see cops with tape measures approaching the car

heheheheh

Typical press release from politician who has absolutely no idea what he is talking about. Michael Daley quite obviously hasn't got a clue. A very confusing press release with conflicting wording and contradictory statements. We will just have to wait for the pubic service bureaucrats to sort out another mess created by their minister.

Cheers

Gary

Someone will need to tell this ignoramus that every used car is lower than a brand new car, it's called settling and it happens to every car. The older the car, the more k's the greater the settling. The Recognition Documents for cars that are lodged by their manufacturer with DOTARS (for ADR approval) shows their new height. So his ministerial limo needs approval because it's lower than its recognition document height. Arrest him he's a hoon. :)

Cheers

Gary

Someone will need to tell this ignoramus that every used car is lower than a brand new car, it's called settling and it happens to every car. The older the car, the more k's the greater the settling. The Recognition Documents for cars that are lodged by their manufacturer with DOTARS (for ADR approval) shows their new height. So his ministerial limo needs approval because it's lower than its recognition document height. Arrest him he's a hoon. :)

Cheers

Gary

Ever thought of entering politics SK??

5cm isnt much.....so if I load my work vehicle up and i get pulled up am I going to be fined for being a hoon...cause Im certainly not pulling 400L worth of diesel off the back of a ute so they can measure it with out a load etc.

And what about cars like a commodere Executive dealer fitted with FE2 or HSV spec suspention.

What a shit law!!!

Actually, Ando (s13deviat) was coming back from Wakie, had gtr rims and semi's and tools etc etc in the backl of his s13

now the car would have weight alot more, and lowered the car more because of the extra gear in the car. got pulled over because car was too low. Tried explaining that to the officerbecause of the extra gear it looks lower.

bit of a joke, so if your carrying things, or even towing, you'll be labled as a hoon because your car will look too low.

sydney kid for pm? :)

Those minitrucking types are in for a rude shock. I've been exposed to their culture before and some of the things they do to their suspension are horrific! Then again there are the smart ones that get their trucks engineered but still, taking leaves out of your springs can't be good.

Just saw this on another forum

Originally Posted by www.fordmods.com.au

I've just been on the phone to the RTA. Apparently this is the go

- There has been no official word (suprise suprise)

- The bloke I spoke to said that the paper has got it wrong

- At the moment they are looking at limiting how much a car can be raised, not lowered.

- Currently the existing 100mm ground clearance / 1/3 suspension travel is still in place

- Any changes would most likely affect any new installations i.e. anyone with changes done befoe August 1st would be ok

This is just what the bloke has told me.

haha this is stupid. so basically you can say the lowering was done before 1st of august and your in the clear?

Yup, and the cop who pulled you over will believe it........... Riiiiiiiiiight.

I agree, it's stupid.

by, "all modifications needing approval", does that mean everything including pods, mags, lowering, raising, exhaust???

I saw the paper today and the small article listed this aswell.

"any modification to a vehicle will now need engineer approval"

This is crazy. If its from August 1st, how can they prove you did it before Aug 1st?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Any number of different ways. Have the coils draw sufficient current to provide contact wetting. Use different contacts in the switch, either by material or design, better suited to the low current drawn by a relay coil. Etc.
    • Hmm, how does the R34 manage to have headlight relays then without getting excessive carbon buildup on the headlight switch contacts?
    • Not R7R. Meant to type R&R, obviously enough.
    • Bugger "making it look stock". I put one conventional internally fused Hella relay behind each globe. I just pulled the plugs off the back of the globes and built new loom segments with male and female plug parts to match up to the original loom and the globe, and used the original power wires to each globe coming from the switch through the original loom plug to trigger the relays. Ran a big fat (also separately fused) power wire across the front of the car to feed all the relays. It's as ugly as f**k, but it is wedged down between the headlight and battery on the RHS and the airbox and headlight on the LHS, and no-one ever looks in my engine bay, and on the odd occasion that they do I simply give no f**ks for what they think. Fully reversible - not that you'd ever want to. For f**k's sake. It's a Skyline. They made million of the bloody things. We've been crashing them into roadside furniture for 30 years now. There is a negative side effect to putting relays on the headlights. The coil current is too little to properly clean the contacts in the switches and they get blacked up and you have to open them up every couple of years and clean them manually. I have 25 years of experience on this point.
    • I was poking through the R34 wiring diagrams vs R33 and noticed that the R34 has proper headlight relays while the R33 is like the R32 and sends full headlight power through the headlight switch. I'm not afraid of wiring but I really would like to do this in a way that looks OEM (clipping into open positions on the OEM relay box) and also unlike the factory wiring which interlocks the high beam and low beam on the halogen series 1 GTR headlights I want to make it such that turning on the high beams keeps the low beams on as well. Any advice on how to locate the specific connectors + crimp terminals + relays I need? I was thinking one NO relay for low beams and another for combined high + low running off the factory high beam headlight connector. I don't really want to splice into a crusty old probably discontinued factory harness so fully reversible is my goal here.
×
×
  • Create New...