Jump to content
SAU Community

Recommended Posts

Just to let you know from August 1st "car owners will be limited to raising or lowering their suspension by no more than five centimeters" and even this will require an approval certificate from an RTA engineer saying it meets safety standards

Currently you dont need approval upto 5cm and can go upto 15cm with proper approval

Typical press release from politician who has absolutely no idea what he is talking about. Michael Daley quite obviously hasn't got a clue. A very confusing press release with conflicting wording and contradictory statements. We will just have to wait for the pubic service bureaucrats to sort out another mess created by their minister.

Cheers

Gary

so anyone who has already lowered their car up to 5cm will also have to get a cert or risk being fined/defected from Aug 1 ? What the hell... Mine's lowered only 2cm or so from stock and I was planning on dropping it another 2cm when i put new springs in.

Any ideas how much the engineers cert for the suspension might cost ??

Edited by Delta Force

Someone will need to tell him that every used car is lower than a brand new car, it's called settling and it happens to every car. The older the car, the more k's the greater the settling. The Recognition Documents for cars that are lodged by their manufacturer with DOTARS (for ADR approval) shows their new height. So his ministerial limo needs approval because it's lower than its recognition document height. Arrest him he's a hoon. :)

Cheers

Gary

Why cant an automotive engineer or similar write these type of laws? Even a little input would be good, politicians have no idea, what a joke. Anyway the article...

Permission now needed to lower cars

16 July 2009

NEW laws making it an offence to raise or lower a car's suspension without proper approval is about saving lives, New South Wales Roads Minister Michael Daley says.

From August 1, car owners will be limited to raising or lowering their suspension by no more than five centimetres, and all modifications will need approval from Roads and Traffic Authority engineers. Currently, a car can be raised or lowered by up to five centimetres without approval and by up to 15 centimetres with approval.

Mr Daley says while drivers may think a lowered car looks "cool" it really is dangerous and any adjustment of more than five centimetres doesn't belong on the road.

"I don't want to see young hoons putting their lives or the lives of others at risk, just because they think their car looks better 15 centimetres closer to the ground," Mr Daley said.

"Raising or lowering a vehicle's height can put the driver, passengers and other road users at risk.

"It can affect handling, braking and safety features such as electronic stability control."

Any vehicle that is raised or lowered after August 1 will have to carry a certificate stating that the modifications confirm to safety standard requirements.

So wait ... they gave everyone 2 weeks to get an engineers certificate ? I suspect there are tens of thousands of lowered cars, how's that gonna work in 2 weeks? Unless of course this is just another cash grab because they know it's not gonna happen in such a short period of time.

If they want everyone to comply, they should make it free of charge to go to the RTA and have an engineer look over it and issue a certificate/defect.

isnt the RTA for nsw..?

jason your gtr is safe

oh........

well let me send my best wishes to n.s.w import owners

it will be a sad day for all

can we all pause for 1 minute of silence for our fallen brothers.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

thank you and may you all have fond memories of being low

I may be missing something but how does lowering your car decrease performance to a state where it is dangerous?

I mean fair enough if its dragging along the ground but an extra couple of centimeters lower? really?

"Any vehicle that is raised or lowered after August 1 will have to carry a certificate stating that the modifications confirm to safety standard requirements."

So, by interpretation of that statement...cars that have been lowered before that date do not have to carry the certification. Go out and buy a set of adjustable coilovers...

wishful thinking ... I'm pretty sure they meant any car not at stock height after 1st August ... not any car that has the mods DONE after 1st Aug.. How on earth would anyone know the date of when you lowered your car ?? They wouldn't, so your interpretation can't be right.

Invoice from a workshop for the installation?

I'm just pointing out that it's incredibly flawed. The fact that so many existing lowered cars would have to go out and search around for / buy some stock height suspension, it's a complete wank.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, hydraulic lifters will get noisy if they are dirty/fouled in some way, and exactly how that manifests will depend on exactly what schmutz is where. There is a procedure on here somewhere for dismantling and soaking/cleaning them. Replacing them with new is about 50% of the work and about 5% of the money!
    • Thanks for the reply @GTSBoy this is is a hydraulic lifter engine. Yea right i did not realise the lifters were supposed to be compressible while installed. I could push them down but i had to lean almost my while body weight on them.  I have never heard of a lifter/ lifters ticking only at hot idle and getting worse the hotter it gets. I have owned a few jdm cars with noisy lifters. This noise is slightly more subtle, it is more of a sharp gentle metalic tic than the solid and more loud tapping I've heard on lifters. I have used a metal rod, alloy tube, hose and stethoscope and could not find the source of the tick. But it appears to be loudest on the actual engine block behind the exhaust cam gear and next to the oil filter. I had mate (40 year old mechanic) go over it with me and he couldn't find it either..  Could it be a cam seal issue of some sort?  Cheers  
    • This seems problematic and unlikely at the same time. Vanilla RB2Xs have hydraulic lifters. They do have "zero" clearance, but only when running with oil pressure inside them. When not running, you should be able to compress them and obtain heaps of clearance. RB26s and Neos have solid lifters. They should have ~0.3mm and ~0.5mm on the inlet and exhaust respectively. If they have zero clearance then bad things are happening. With nothing else being wrong, it would mean that the valves would be held slightly (ever so slightly) open when they are supposed to be closed and it should have all sorts of problems when running, caused by leakage in/out through the valves. Or, zero clearance can indicate severe valve seat recession. None of it is good. Have you used a piece of hose as a stethoscope to try to localise the noise?  
    • Sorry for reviving an old post, but I'm having the same hot idle tick issue. Did anyone ever find out what it was?  I have checked/ replaced Injectors Coils checked Lifter clerance (is at zero) Checked Cam lobes Replaced exhaust gasket and studs Would appreciate any advice this is driving me nuts  
    • There's a huge reason manufacturers are tuning in dead flat torque curves... Make them reliable (and more drive able)
×
×
  • Create New...