Jump to content
SAU Community

Recommended Posts

you'd also have a much bigger migraine from all the running around and a smaller bank balance.

the lancer wagon fails the silhouette test.

why not grab a Caldina wagon? It's almost the same form factor.

Spot on, I currently am driving a manual Caldina actually. It's a 2002 model so last of the ST215.

It's a really great car actually.

I was just trying to bring the Evo back into light to see if there was a chance of import.

Personallly I'm not a fan of the Legnum, I would chose an M35 over it if I needed a bigger car.

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

...but the legnum is essentially the same size as lanevo wagon isn't it?

=/

i bow out of this thread - i don't know enough to comment =)

legnum : evo wagon = bus : van

rowan,

ST246 is far from slow if driven correctly. I had the privledge of two of these . one was a bit slow - the second (N spec) was far from slow.

also with the EC5W - that is a V6 (6A13 I think) the amount of dicking around to make the thing fit and get the AYC behaving properly would be a nightmare.

I also get the idea that he wants an evo wagon. to me it would be easier to buy an evo 9 chop and build one. only issue I can see is the rear floor being different. (give me a current verion of CATS and I'll tell you.)

my 2c.

Legnum is bigger than an Evo.

If you want a fast wagon, save your pennies and get an Audi RS6 Avant :whistling:

yep! (though servicing the thing may hurt a bit.)

  • 8 months later...

Hi guys

I'm in Japan at the moment, and thinking of heading back home next year with one of these as a personal import. What kind of interest would there be in Oz, and would I be able to sell it quickly? What kind of money would people be looking at parting with for one of these? Let's say a '05, with less than 50,000km on the clock. Automatic unfortunately (the manuals are rare as hen's teeth).

I'm just deciding which car to get out of this or an 2008 Exiga GT to sell back in Oz. I think the Evo wagon would be a better choice - surely it'd be the only Evo wagon in the country.

Hi guys

I'm in Japan at the moment, and thinking of heading back home next year with one of these as a personal import. What kind of interest would there be in Oz, and would I be able to sell it quickly? What kind of money would people be looking at parting with for one of these? Let's say a '05, with less than 50,000km on the clock. Automatic unfortunately (the manuals are rare as hen's teeth).

I'm just deciding which car to get out of this or an 2008 Exiga GT to sell back in Oz. I think the Evo wagon would be a better choice - surely it'd be the only Evo wagon in the country.

I see manuals at auction all the time. There wouldn't be any difficulty finding one, the only difference would be the price.

As for how much you could sell it for, it seems increasingly difficult to make a profit from imports these days. Yes it would be unique, but finding someone that appreciates it might be difficult.

As for me, I would love one. But I don't like paying peoples profit margins. >_<

Edited by Blitz_boy

I see manuals at auction all the time. There wouldn't be any difficulty finding one, the only difference would be the price.

As for how much you could sell it for, it seems increasingly difficult to make a profit from imports these days. Yes it would be unique, but finding someone that appreciates it might be difficult.

As for me, I would love one. But I don't like paying peoples profit margins. >_<

Cheers, will have to check into the auctions more then, a manual would be ideal.

As for price...well I have done a personal import before and while it is rewarding, it is no stroll in the park and there are loads of risks, so I'm not gonna do it for or cheap. I'm not running a charity here, although I would like to give someone the opportunity of owning a car they otherwise wouldn't be able to get their hands on.

  • 1 month later...

so can these be brought over and put on our roads legally? like seriously i think these are hot as F*** because of the shape plus there isnt anything over here to compete with them thats not imported. (stagea, toyota wats it called) only thing i can think of over here is a wrx is id take the evo anyday lol. if anyone needs more proof of their brilliance search youtube for evo 9 wagon vs rs5 audi lol

That sounds promising. Its still a toss-up between the CT9W, SG9 Foz or the Honda FD2R you mentioned. This guy sold his civic for $75k. He sounds like a right cvnt though:

http://firesport.com.au/2008-mugen-rr-eoi-car-trading-point-sales--ad181884.htm

  • 1 year later...

Resurrection Time...

JapLink Motors - now JLM - has successfully been able to comply the Mitsubishi Airtrek.

Some other importers in Sydney have had trouble with getting "emissions" testing passed.

JLM does not keep stock. They will accept orders as I'm sure Iron Chef will too.

Legnum is bigger than an Evo.

If you want a fast wagon, save your pennies and get an Audi RS6 Avant wink.gif

Better still: In 3 years time, an AIRTREK off you-know-who

FYP for Bill's sake ^^^ - lol

FYP for Bill's sake ^^^ - lol

Haha Terry, I knew that my clarity at 3 am wasnt going to do me any good.

I understood that it was the Airtek, my enthusiasm must have made it out as if I thought it was the evo.

Although I'm not directly interested in the Airtrek, I just think its awesome when we get something in our favour as opposed to not having it at all.

We have enough beautiful cars that are restricted for Australian road use/importing. One less unrestricted, one better for the Japanese car community and enthusiast in general here in Australia..

Edited by GTR_77

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I’m only posting this cause I thought I had seen a bad review on these somewhere before. Any feedback? Would you guys recommend that if I do buy these I send em to RC to have em checked before installing. Or any other suggestions?   https://www.ebay.com/itm/114009965865?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=JDl-15yLQ8C&sssrc=4429486&ssuid=QTzlFXB1S-S&var=&widget_ver=artemis&media=COPY
    • They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
    • Oh yes done this when the window started flopping around.  Turns out the guides that run along the rail chanel had crumbed way. Took off the door card and pulled out the window mech, then the window, which you have to pull out through the top. As said unbolt the guide rail and don't spend 30 minutes getting frustrated trying to find a way to slide it out upwards cause that don't frigging work. Drop it down and out through the door hole. All I did to repair it was slice some 10mm clear plastic tube, vertically, then screw it to the guide rail both sides. This tubing rolls inward on both sides and leaves a gap wide enough to hold the window. To finish all I did was lube the plastic tube with olive oil and Bob's your uncle . . . well if he has the operation he can be your Aunt ! !  10 bucks in plastic tube and another 5 minute job done again . . . . YEH BULLSH#T ! My love for Skylines knows no bounds !
    • So was there a solution to this problem? I’m having this issue now. 
    • not expensive, just irreplaceable if you don't go sub 60 at wakie in that thing people will start talking
×
×
  • Create New...