Jump to content
SAU Community

Recommended Posts

Hi guys, have heard that the standard r34gtt cooler fits straight in place of the stock r33 cooler. Can anyone confirm this for me?

Also, I have read that the stock r33 cooler is efficient up to 180rwkw, the r34 cooler is supposedly thicker and more efficient, does anyone know how much power its good for?

Link to comment
https://www.sau.com.au/forums/topic/27956-r34gtt-cooler-into-r33/
Share on other sites

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Hi gts,

yeh I realise its not going to give the gains that a FMIC will but at 1/10 of the price (approx $150 for 2nd hand) it seems to me to be fairly decent value, unless someone knows otherwise.

how much better than r33 one, does anyone have any figures on it (Ive tried a search couple of times but Ive only found general statements bout efficiency).

hey chief i bolted an R34 cooler into mine, straight swap, no problems.

the thicker core may be a slight disadvantage over wider/thinner cores but when the cooler is ducted correctly it shouldn't be a drama. no increase (discernable) in lag is a big advantage and if you are using it as a road car then most I/C's probably work as heat sinks so the extra 60% ?? vol is an improvement.

Responsiveness may beat kW in many situations.

i have no hard figures on the improvements.

i have one on my R33 with the r34 ducting etc to the cooler and the car is also mdded and hasnt pinged or anything strange,

and doesnt seem to care too much

i could notice on my previous R33 when enough was enough and you had to let it cool. so yeah for the small price its worth it, and if you can set up a decent water spray for a few dollars more then thats alot more efficient that stock but yeah still no FMIC

damn right, they are cheap if you sell the old one, but the best bet is to ensure that you have proper ducting of air onto the cooler by sealing all sides and proper venting into the wheel arch. the wheel arch has a negative pressure (as i understand it) therefore you will get good airflow and velocities thru the cooler (remembering it is a thicker core than the '33) if you take the time to cut and mesh this section.

Agreed, its not a perfect solution for peak HP but for most road applications the responsiveness should leave you ahead. Read rev210's posts if you want some validation from a more authoritative source.

  • 11 months later...

Hi guys,

Sorry to bring up an old thread, but I though I would just post my feelings on this topic again.

I just bought and installed an R34 gtt intercooler on my car, I would say that based on my initial impressions, I think it was worth it. :D

Dont get me wrong, Im not seeing masssive differences in power, but I can defiinately feel a significant difference between the new cooler and stock one.

It feels like your upping the boost 0.1bar (or so) more.l As far as actual power differences go I have no idea what sort of improvement I have achieved, but I think that to really notice any difference, you would have to improve power levels by at least 5% so Im assuming were looking at 8-10rwkw.

This is all at 0.7bar mind you, so Im not sure if that makes any difference.

Does anyone have or heard of any real figures on improvements with this sort of upgrade? Would be interested to know.

  • 2 months later...

Hey people, I'm looking at doing this mod if my car doesn't sell quick enough, just to get some extra power :)

How much boost would the R34 intercooler be able to cope with? Note this would be for short bursts just to dart through traffic etc.

12psi? 10psi? I have a good turbo :D

Hey people, I'm looking at doing this mod if my car doesn't sell quick enough, just to get some extra power :)

How much boost on standard turbo would the R34 intercooler be able to cope with? Note this would be for short bursts just to dart through traffic etc.

12psi? 10psi? I have a good turbo :D

12-13psi

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Already looked at a few prior to getting the MX5, really nice car, had all the mod cons, but I wasn't really sold on the new "look" I did miss my 2017 Limited, and I personally prefer the "look" of the older car over the new model, but, when pondering I kept going back looking at MX5's But it was same same for the new ND's, I wasn't sold on the new "look", especially the RF with its weird roof, which only half goes down, like a targa top sort of thing As I stated before, I did look at NC's, but the cars I looked at were PRHT's, but I didn't like their roof line "look" of the PRHT, until I saw the soft top version, (someone on SAU posted a for sale ad for one with a soft top that caught my attention, you can blame them for my choice.....🤣) and.... that old style detachable hard tops were available for them, which keeps the old MX5 more smoother flowing roof line, and the more rounded body style, similar to the NA-NB, to me, the arse end of the ND looks to "modern" Much like how I prefer the NC1 front bar, over the later models How long will I keep this car for is unknown, but currently, there's nothing else out there that "floats my boat" for a small, fun, little "sports car", that I can play with and enjoy looking at and driving But, who knows what the future holds, and going off current new car styling, if I replace it, it will be a older model something something       
    • looking forward to your t56 swap man its a game changer if it works! 
    • So, when are you trying the new GR86 or BRZ?
    • Uncle Duncan Yeap, FI Interchiller  Works well, normal IAT's cruising with the WTA only went from 50°c+ to 25-30°c with the interchiller  Before, when on it hard, the IAT would see 80-90°c, now, the highest has been was around 38°c IIRC IAT is measured under the blower hat I recommend it for the street or strip where your only on it hard for 10 or so seconds, but it wouldn't be efficient for sustained track use as it would heat soak from the AC turning off or whatever it does during WOT to protect the compressor It really needs the AC running for it to not heat soak and keep the WTA coolant chilled My WTA coolant temps when just cruising is around 2°c
    • Hey Mark...sorry to interrupt your career change to hair dressing... but...did you ever fit the interchiller to the commodore, and if so how was it? And, who made it?
×
×
  • Create New...