Jump to content
SAU Community

2.8 Hks Stroker Bottom End

555kkk
 Share

Recommended Posts

grygtr Collaborator

grygtr

Posted
Posted

What the photo doesnt show is that the s-pipe is useless without the second part i thought i was getting. he then "found" the second part and offered to send me that,Much like he sold me the plenum then called and said Oh I "found" you will need the S-pipe

The guy Bull#$%ed about having sent the S-pipe several times to me I missed my dyno booking. When it did arrive poorly packed(in an envolope) and in bad condition, i discovered it was useless to me.I would not spend 8.5k with someone who has show himeself to lack any sense fairness in a a $250 transaction.

You will probally find you wont get your rings or pins or something like that, maybe he will "find" a 6th piston after sold you 5.

555kkk Experienced

555kkk

Posted
  • Author
Posted

I sent you exactly what was advertised and in the photograph ! if your mechanic didnt know how to fit them it time for your dyno run not my problem . you got exactly what was advertised.

Sold $5000 dollar set of endless brakes to adam on here last week he was more then happy with my photos and description. sold $1600 tomei head, apexi rx 6 turbo $1500, another Modified head $1500, sequential 6 speed trust box $10,000 NO complaints ! i could have sold the part to other people at the time, but you said "no you had already put money into my account" you were that certain about part you didnt even say ill take it - you just put the money into my account.

555kkk Experienced

555kkk

Posted
  • Author
Posted (edited)

just got brand new HKS individual prices for pistons rods and crank

pistons 3340

rods 3870

crank 9239

so if i was to split into the three parts the amounts stated earlier for individual parts would change. my mistake sorry

Edited by 555kkk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      That's the thing....the basics of fuel and ignition are deceptively simple.....getting it to behave like factory in all conditions after airflow mods is way more complex. Newer cars like the V37 are all about modifying the standard ECU which is about a billion times more complex than they were 20 years ago, with a bunch of parameters affecting others
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      The larger TB I had on the SS was a pain to get to idle right, but, that was cable In the end they just raised the idle up a couple of hundred RPM so it was happy idling away either in gear or in park (slush box life) I'm curious on how my NC will idle with the new intake, larger TB, and cams that are currently going in/on, but I have faith that MX5 Mania will sort this "electronical" "black magic" out the best they can in the tune with a electronic TB Sometimes I wish I knew more about the intricacies of tuning, but most of the time I don't because I know it would hurt my brain 🤣
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      That's the thing. Cam is smaller than before.. though the old cam was +6 degrees advanced. We're talking huge changes here, the narrowbands want to trim out 20% of fuel and pull the (wideband) idle to like 16.0 AFR or such. One side is a little more trimmy than the other. Think along the lines of ~20% to ~15-18%. Unfortunately my scouring of the internet hasn't really found anyone with this issue. People either just disable NB's or have them wildly different, where one is -20% and the other is +20 or 0 (i.e a sensor is just dead/wiring is just busted). Turning them off and relying on the base map only results in the wideband reporting at about 14.0 with the Varex closed. It'd be a little leaner (closer to 14.7ish) with the Varex open. I know I can just change the switch points so that the narrowbands agree with the wideband, but it's still odd. Both of them are reading voltage, it's just that they're reading quite high mv, in the ~800 region. It's just odd. This was with the IAT fudged to report it was about ~22 degrees which is my guesstimation of the temperature in the room. I have an OEM sensor ready to try tonight, which is slow and crap - but .. worked last time I used it. Sadly I am aware that idle tuning with the big TB is going to be a PITA and I look 'forward' to many hours spent stalling or stumbling idle or delving into drivability things.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Probably the cam.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      The GTR strut brace clears the new manifold.. by about 0.5mm. So this means I need to buy an OEM GTT Strut brace (again), which will clear the new manifold, but not the bonnet vents. I guess I can sell the GTR Strut brace with the bonnet with the vents as a package deal as someone will need this one day. So my choices are vented bonnet but no strut brace, or GTR Bonnet with OEM brace (which I have to buy) but is bright red instead of the same colour as the rest of the car, which means the entire front end of the car will just be red until it goes back to paint jail. In other news the engine starts and doesn't leak. Why both O2 narrowband sensors think the tune is rich AF I do not know. The idle is also pretty shitty and my expensive IAT sensor from the USA is dead. The car sounds awful. But I assume or at least hope this is due to the many exhaust leaks, and the concrete garage it is in, sitting there with 0 intake bolted to it, and no bonnet or panels or anything to stop the induction/intake sound which is about 200db.
×
×
  • Create New...