Wtb: Resistor Pack To Suite Gtr Injectors

[Drakey]

Hi all,

Chasing a resisitor pack for installing the gtr injectors.

Does any body have one or know where i can get one?

Cheers

[partyboy73]

Was looking to do this myself and after some research I found that you could just buy 6 x 10ohm 10w resistors from jaycar (or equivalent) and splice them in just as you would with the GTR pack... worth looking into since it only costs $10 and they're brand new

Mike

[Drakey]

Hi Mike! i like your thinking. So you just put them in the main power line of each injector?

And they are definately 10ohm?

Would make it easier!

[partyboy73]

Yep, 10ohm 10 watt... I hav'nt done it yet but was thinkin that I might be able to make up a pack by having one common 'in' and 6 'outs' since the power wires branch off fron one wire... I'll sus it out when I come to it... apparently it has been done with much success and I dont see why it would'nt work since all you are wanting to achieve is dropping the ohms by 10...

[Drakey]

Oh so the current set up is 1 power line which branches to 6 different wires?

So if you put the resistor right before the power line into the injector is should drop each line by 10 ohms thus operating the injector.

Would you really need to build a box with 1 power line in then 6 power lines out.

Be easier just soldering the resistor right beforte injector..... if this works.

Do you know what ohms the standard rb20 injector runs off and what the gtr once runs off?