Jump to content
SAU Community

180sx Rolling Shell + Parts


Recommended Posts

180SX rolling shell. Striped interior but still have all interior parts. Coilovers front and rear. Some parts still in engine bay including AC compressor and power steering pump (CA18DET). LSD with larger cooling fins. drive shafts and tailshaft etc. Doors have intrusion bars fitted and all new seatbelts. Car was originally being done as a street car but then changed to a track car but is now up for grabs. $1000

Also for sale to suit 180SX

GP sports, full body kit

(front bar side skirts rear bar. All near new. $700 o.n.o

20mm Front panels (maybe 30mm not sure :) ) $200 o.n.o

GAB super, front struts , unsure of spring weights. $100 o.n.o

Exhaust (RSR front pipe, hollowed cat, flared cannon) $100 o.n.o

PM or 0417889424 Located near Holdenhill, Adelaide, South Australia

Link to comment
Share on other sites

regoable?

I see new vin has been etched into the firewheel but no compliance plate fitted

keen if regoable

Unsure of its full history. Imported to Quensland. Bought by a mate but wasnt regoed and far as he knew never had been. I bought it off him but never took it through regency for rego etc. Not sure if it can at all now, as its original engine and gear box whave been sold. has import approval papers but no complience papers but as i said has new seat belts and intrusion bars etc. To be safe i will say it cant be regoed but feel free to ask the nazis motor transport if there is a way.

Edited by deform_reality
Link to comment
Share on other sites

180SX rolling shell. Striped interior but still have all interior parts. Coilovers front and rear. Some parts still in engine bay including AC compressor and power steering pump (CA18DET). LSD with larger cooling fins. drive shafts and tailshaft etc. Doors have intrusion bars fitted and all new seatbelts. Car was originally being done as a street car but then changed to a track car but is now up for grabs. $1000

Also for sale to suit 180SX

GP sports, full body kit

(front bar side skirts rear bar. All near new. $700 o.n.o

20mm Front panels (maybe 30mm not sure :) ) $200 o.n.o

GAB super, front struts , unsure of spring weights. $100 o.n.o

Exhaust (RSR front pipe, hollowed cat, flared cannon) $100 o.n.o

PM or 0417889424 Located near Holdenhill, Adelaide, South Australia

GP Side skirts and rear bar SOLD

Link to comment
Share on other sites

bargain. :P

some info that might help the new owner. it may well have been complied under the old 15yo rule if it's a 1988 89 or 90 model. in that case it would have had rego items addressed (seatbelts, intrusions bars etc) but depending on the state it would not have needed a compliance plate as such. just the vin either etched or stamped on it somewhere. so it's quite possible if it was made roadworthy that it could be registered again. but either way it's a great start as a track car.

Link to comment
Share on other sites

bargain. :laugh:

some info that might help the new owner. it may well have been complied under the old 15yo rule if it's a 1988 89 or 90 model. in that case it would have had rego items addressed (seatbelts, intrusions bars etc) but depending on the state it would not have needed a compliance plate as such. just the vin either etched or stamped on it somewhere. so it's quite possible if it was made roadworthy that it could be registered again. but either way it's a great start as a track car.

Had damage from forktrucks to the chassis rail plus a little rust here and there so once you add engine etc it wouldnt be worth getting it on the road but sweet as for a track car. If i hadnt been made redundant thats what was going to happen to it. Oh well, new job...new dreams for a new ride...time for a 32 i think :geek:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • I am currently going this route. I am curious how much horse power you put behind the cut bell housing? Collins was telling me I am going to crack it and bluh bluh bluh. Because I didn’t buy the custom fly wheel from him. I am looking for somewhere around like 500 hp
    • Forgot to mention that these are the before pics when I first got it!
    • Thanks @PranK for the updated member status, much appreciated! 👍🏼 Now, about those pics… Unfortunately I could only find ones that I took in the dark. I was soon to discover that underneath it wasn’t in the best shape, but it was mine and that’s all I cared about at the time 😆
    • Oh, and only having done this task yesterday, I've now driven the car ~60km since, and while it is hard to avoid placebo effect and confirmation bias, I reckon that some annoyances I had with the way the car has been behaving have improved. Which....kinda makes sense, I guess. If the bushes were really stiff and resisting rotation, they would have been contributing to the effective wheel rate. And if it was more so on one side (which it was, because one side was worse than the other) then.... you might imagine that the additional rate would be asymmetric, and potentially even different between compression and rebound. And so... the car has been twitchy at higher speeds - like freeway on ramps. It really shouldn't be. The wheel alignment is good and there are no (other) known problems elsewhere in the suspension. But at 90-100 on a long sweeping ramp, tiny steering wheel motions would make it feel like it wanted to rear steer. Quite nervous. At lower speeds it would heave about in a manner that it didn't use to. Didn't want to put power down, etc etc. Now...seems to behave better. Am going to have to concentrate on the various corners where it has exhibited weirdness, on the rare occasions when I can get a decent run at them without Methanial getting in the way in his D-Max/Ranger/LDV Van/etc.
×
×
  • Create New...