Jump to content
SAU Community

Recommended Posts

hey guys

just wondering if you guys know anything concerning these few things

firstly heres ther story

i got fined on great wester hwy, between pitt and steele st

i came out onto the street from o/connell st

i got done doing 70 and the zone is 60

the issue i'm having is

there was no signs anywhere up to even past the speed camera to state it was a 60 zone

also i dont know if it matters but from o'connell st to the camera

there are only 2 warning signs

does that make a different that there was only 2 shown and not 3

i'm unsure about that, i think it doesnt matter, but have been told in the past that 3 have to be displayed

and also, how does it work when there is no signage? do you take the speed from the previous street u were travelling? or how does it go

thanks

Link to comment
https://www.sau.com.au/forums/topic/280328-anyone-know-anything-about-this/
Share on other sites

What was the speed limit in the street you turned off?

You can write to the local commander and cc to state debt recovery about the fine. Give your reasons and ask for leniency in this matter (point out you have no record if thats the case). The arguement they will give is that you should have been doing 50km (being the lowest speed limit) if you didnt know the speed limit at the time. Its stupid but i got done with the same thing except it wasnt by a camera it was by a highway patrol.

Good luck =)

The law in nsw is : any street without a sign stating the speed is a 50km/h zone, doubt you can dodge it by saying there were no speed limit signs, normally though they have a warning sign next to the speed limit...

There is also no actual LAW stating those warning signs for speed cameras have to be there. So you won't get away witht he "But there was only 2 speed warning signs" added to that, nearly every single one I've passed has a speed limit signed tacked onto the side of the speed camera warning one.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome Jan, It's very likely that you are in over your head. You'll just have to learn to swim hard and fast! These old rust buckets have more ways to bankrupt us than almost any other car. But hopefully there's nothing wrong that ruins the whole show! We can help a fair bit. There's plenty here who've been fixing these things for >25 years. cheers
    • Hi all. First off, thanks for reading my post. So end of last season I put the car away knowing I was leaking at least two fluids. One of them being rear turbo's oil. I went to my car recently that is waiting in a garage to take a peek with my boroscope to try and see if I can narrow down the souce of oil before taking it out of storage. What I found is not so great I think. The rear turbo is (probably) leaking from the oil drain. The hose and it's clamps are probably the original ones, so most likely just worn out or loose. However I spotted a line of rust going straight down from the turbo oil feed, as if water leaked out of there at some point. Also explains the red liquid that was dripping from my front subframe, which I initially thought was power steering. I can even see coolant drops hanging off the side of the oil pan as well. After a quick hit on the web I found a select few discussions about porous engine blocks. My question is if the pics of the turbo oil feed and the left hand side of the block (imgur link below) looks like it could be exactly that to you. Maybe someone in the community has seen it before and knows what it looks like. If it actually is a porously leaking block, has anyone attempted at fixing it with simple methods like putting a sealer in the cooling system and using something like jb weld on the block surface, or will it just leak in 2 weeks again? I could not find any detailed info or pictures on this topic. If I need a new engine, tell me softly. https://imgur.com/a/knVvmZ8
    • Hey all. I'm 23 and from Germany, September last year I bought a mildly modded 1995 GTR Vspec. Looks great and was fun so far, but I already have a list of issues of various severity that I need to take care of, potentially growing longer the closer I look. I just hope I'm not in over my head, I really want to keep the car and work towards it becoming great. I hope y'all will help me out in getting there, I am positive I will need help sooner rather than later to figure out how to proceed. greetings, some pics of the car I posted to imgur. https://imgur.com/a/StKkabz
    • Would be interesting what the price would be without the barracuda wheels. Looks like he dropped it down to 40k. Maybe his mate wasn't correct about the 50k evaluation. Has always been a dream of mine to own an auto 33. Looks like I'll have to keep saving my pocket money or ask mum for more pocket money.
    • Thinking about importing a stagea as a family car since i’m getting married this year, thoughts? Me and my fiance both like stageas, but don’t have any experience with them
×
×
  • Create New...