Jump to content
SAU Community

Recommended Posts

I'm interested in Mobil's synthetic motorbike oils and how they differ from their car engine intended synthetic oils .

This is what they have to say to the bike people who want to know the differences .

https://www.mobiloil.com/USA-English/MotorO...FAQs.aspx#FAQs1

In short the additive pack is different to suit common engine/gearbox requirements and the wet plate clutch .

Assuming that some of the V8 Supercar teams ran this oil it must be pretty hardy stuff which it would have to be anyway in a hard worked sport bike engine .

I'm just curious to know what people think of running this 4T 10W40 or 15W50 in a road car engine .

The 15W50 numbers don't worry me so much because previous research leads me to believe that the W as in 15W is a cold pouring/cold cranking winter index not a viscosity rating number .

What does interest me about these 4T bike oils is the claimed lower friction modifier content which I take to mean they have to do the job standing on their own feet and without additives that can throw the towl in at high temperatures and loadings .

I know that many bike engines use roller crankshaft bearings but not all of them .

Can anyone that knows anything about V8 race engines offer any info about oils and if possible synthetic ones ?

An interesting snipped I was told is that Royal Purple competition oils are a bit more biased towards alcohol or exotic fueled engines and it makes me wonder what the V8's are running now they're burning a variation of E85 .

Cheers and thanks , Adrian .

I'm interested in Mobil's synthetic motorbike oils and how they differ from their car engine intended synthetic oils .

This is what they have to say to the bike people who want to know the differences .

https://www.mobiloil.com/USA-English/MotorO...FAQs.aspx#FAQs1

In short the additive pack is different to suit common engine/gearbox requirements and the wet plate clutch .

Assuming that some of the V8 Supercar teams ran this oil it must be pretty hardy stuff which it would have to be anyway in a hard worked sport bike engine .

I'm just curious to know what people think of running this 4T 10W40 or 15W50 in a road car engine .

The 15W50 numbers don't worry me so much because previous research leads me to believe that the W as in 15W is a cold pouring/cold cranking winter index not a viscosity rating number .

What does interest me about these 4T bike oils is the claimed lower friction modifier content which I take to mean they have to do the job standing on their own feet and without additives that can throw the towl in at high temperatures and loadings .

The oil is merely tailored for its purpose, which seems like common sense and therefore not that interesting.

Bike oil - cant use FMs because of wet clutch, so its left out and economy is worse because of that

Car oil - can use FMs because no wet clutch, so economy is better

also another thing to consider, bike engine rotating assembly has a lot less mass than your averidge 6cyl crank, rods and pistons. and yes they do rev a lot higher so they have higher piston speed but with less mass so the oil demands are less.

I have a CBR600R and the oil that comes out of it after 5000k's looks like oil that comes out of my RB at 1000k's

There are a couple of guys that have run bike oil in there car engines - me included. the Motul stuff I used last time was 10w40 synthetic. there were no adverse effects, the oil looked the same when it came out as it usually does. the main reason i did it was i forgot to buy oil and my bike oil was there.

Mobil used to have a coloured lid code for their oil, but nobody understood it. Red, blue, gold etc it went something like:

• Gold caps for Mobil 1 Extended Performance

• Silver caps for our Mobil 1 products

• Green caps for Mobil 1 Advanced Fuel Economy

• Black caps for Mobil 1 Racing oils, Mobil 1 motorcycle oils and Mobil Clean High Mileage

• Blue caps for Mobil Clean 7500 and

• Red caps for Mobil Clean 5000

They are now [or last I saw] actually labelling their oils.

I've used the black and the gold in my bike and had no problems. I've used the gold in my Skyline and its OK.........would be nice if it was cheaper though!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seemed to be good when Jeff owned it but they did a shit job on my car, probably worth a think before spending 10's of thousands of dollars where they might be cutting corners
    • Starting with issues 1 - 5, we have already run into a problem...!  Issue #4 contained 2x front brake calipers, instead of 1 caliper and 1x steering knuckle. Will have to call DeAgostini on Monday to sort it out. Anyway here's some photos.  Issue #1 is the front bumper, headlights and number plate. Issue #2 is the front wheel (with "We produced with spartan air." text on the centre cap!) and tyre, the front lip spoiler and cylinder head cover with ignition coils under the centre cover... which will never be seen again. Issue #3 is the bonnet and cylinder head. Issue #4 is the front strut, brake disc (with laser etched metal discs) and brake caliper. I stopped here because of the issue with the missing steering knuckle.  Next update will be #5 - #10 in a few weeks.
    • DeAgostini is one of a few companies that release quite large (the largest commonly available size actually) 1/8 scale models in a series of weekly issues over 100 - 110 instalments.  They release different models for different markets and DeAgostini Japan have release the BNR32 Skyline GT-R Nismo last month. I've made two of these 1/8 scale sized cars (one an R35 GT-R from 2012 - 2014, the other I'm just about halfway through, a BNR34 Skyline GT-R from the 2Fast 2Furious movie) so when this R32 was announced there was no way I could ignore it as it's my favourite out of all Nissans.  Each issue costs around $20 so it costs about $2.2K when completed. I suppose it is very expensive for what it is, but the quality and details are really very good, and there are many "gimmicks" like fully functioning exterior and interior lights operated with a remote control, working steering, all doors/bonnet/boot/fuel lid open and close, the side mirrors fold in and it even has a speaker for the engine revving sounds when you turn the lights on.  Each issue comes with a magazine that tells the story of the BNR32 Skyline GT-R Nismo from the first design stages of the BNR32 to Group A homologation and the various racing version that were run in the Japanese Group A and JGTC, and Australian Group A.  So I plan to update the build in this thread 5 issues at a time.  https://deagostini.jp/r32/?srsltid=AfmBOooKjxDc4EUK2rmXqMBPgyHfFJ24s4oEPJBNpnF-lFlsRoW0PE6P
    • As per title.. has anyone used so far? Keen to hear results, comparisons. In the market for a new mani for my new turbo. Any issues cracking?
×
×
  • Create New...