Jump to content
SAU Community

Recommended Posts

Lol superlap is a possibility once we achieve our goal in drag racing.

First Shipment of sucrogen E85 arrived today, sold a couple of drums already thumbsup.gif. Still got 600ltrs left for the weekend and a full set of Advan AD08s, looks like a lot of fun over the next few days awesome!!!!!!!!!!!

Thanks for the pics Cal, looking good mate, you will have to come down home one day and get some proper ones.

Today was its first outing at the Palmyra Motor Mayhem Car Show and we are all super excited about the result today. Big thank you to all the fellow SAU members that came out and cheered us on thumbsup.gif. We did end up winning grand champion today but felt guilty claiming it see as we organised the event so we ended up giving it to second place which was very close competition. Still managed to win highest Boosted 6 in dyno comp with a 690rwhp??? The dyno was way out of calibration as everyone's car was way down on power, not to worry.

My lil brother Matt done a very good job of taming the beast today, on his first run managed to reel out a 10.9sec pass @ 135mph and a pretty crappy 1.8sec 60ft. With the 19inch wheels and the AD08s running 35psi in them and the lowest tune of 700hp. Pretty damn good, being the very first time he had ever 4wd launch and raced with a Dog Box. Can only get better from here looking forward to the next outing some Mickey T ET streets and a chute are next on the list. A bit more practice and the car will be into the 9's, would love to get a 9sec pass on the 19's would make my day.

Pics and Vids coming soon.

Hi Guys here is the 10.9sec pass Video,, Bulk wheel spin due to the tires still runing 35psi haha, but hopefully next time we go out we are more prepaired and will punch out a 9...

excuse my brother and my uncle language as they were probably drunk... hahaha

Hi Guys here is the 10.9sec pass Video,, Bulk wheel spin due to the tires still runing 35psi haha, but hopefully next time we go out we are more prepaired and will punch out a 9...

excuse my brother and my uncle language as they were probably drunk... hahaha

that thing is wheel spinning half the track - what a beast!

i luv the commentary, does he say towards the end "cmon nail the carnt"? hahahaaaaaa

Lol yeah something...something flamin mongrel i think.

Here's some more weekend pics

268413_10150239398233485_679318484_7435352_5366852_n.jpg

268023_10150239398443485_679318484_7435357_2722834_n.jpg

264058_10150239398613485_679318484_7435360_2867028_n.jpg

Grants Tommy Kaira R34 GTR

264258_10150239399578485_679318484_7435372_2301571_n.jpg

261998_10150239399948485_679318484_7435383_2524175_n.jpg

263723_10150239400238485_679318484_7435388_3116444_n.jpg

Nissan were generous enough to bring out the New R35 GTR and 370Z and showcase them next to our tent (Thanks Nissan)!!!!!!!!

261443_10150239400488485_679318484_7435392_2790214_n.jpg

263493_10150239400843485_679318484_7435396_4383598_n.jpg

Yeah ended up winning Highest 6cyl, Kent Battle with his Methnol Ford XR6T won highest overall but the rules were that you can only win one either Overall or Highest 6 not both.

Heres some pics of the new toys, just missing the R33 should be done shortly:

269041_10150255843043485_679318484_7511118_5926042_n.jpg

264578_10150255843708485_679318484_7511125_1888276_n.jpg

270228_10150255843938485_679318484_7511126_3214776_n.jpg

Hi Guys,

Just Ordered a shipment of 4" Titanium pipe for my full exhaust system, I have attached a picture with my idea. 4" From turbo back to just past the Cat Point than will split into twin 2.5" Titanium and exit where i have drawn on the picture, the 3rd pipe will be a 2.5" titanium Screamer, Either the pipes will exit there or maybe lower on the side skirt. What do people think?

283172_2232722184671_1446408764_32507011_3375435_n.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I wouldn't be concerned at all, other than to suggest having them flow tested when you receive them to confirm they are reasonably similar, and then put the highest to lowest flowing ones in cylinder 6,1,5,2,4,3
    • I’m only posting this cause I thought I had seen a bad review on these somewhere before. Any feedback? Would you guys recommend that if I do buy these I send em to RC to have em checked before installing. Or any other suggestions?   https://www.ebay.com/itm/114009965865?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=JDl-15yLQ8C&sssrc=4429486&ssuid=QTzlFXB1S-S&var=&widget_ver=artemis&media=COPY
    • They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
    • Oh yes done this when the window started flopping around.  Turns out the guides that run along the rail chanel had crumbed way. Took off the door card and pulled out the window mech, then the window, which you have to pull out through the top. As said unbolt the guide rail and don't spend 30 minutes getting frustrated trying to find a way to slide it out upwards cause that don't frigging work. Drop it down and out through the door hole. All I did to repair it was slice some 10mm clear plastic tube, vertically, then screw it to the guide rail both sides. This tubing rolls inward on both sides and leaves a gap wide enough to hold the window. To finish all I did was lube the plastic tube with olive oil and Bob's your uncle . . . well if he has the operation he can be your Aunt ! !  10 bucks in plastic tube and another 5 minute job done again . . . . YEH BULLSH#T ! My love for Skylines knows no bounds !
×
×
  • Create New...