Jump to content
SAU Community

Recommended Posts

Hey guys, I'm looking at preparing a locally delivered S14 200SX for track use, and I wanted to make sure I stayed within the rules n regs of the MSCA in case I get around to competing in their sprints.

Now AFAIK the car is eligible under their marque cars, but what I'm confused about is which category it fits in under. Now the SR20 being a 1998cc engine should be a Class C Marque car right? The only cars I can find in Class C are CRX's and Elise's. Is there some sort of penalty for turbo cars that aren't covered in the Sup Regs i'm reading?

The only person I could find who races a 200sx s14 in VIC is Simon Hall, and he seems to be lumped in Class J, which according to the sup regs is Non Marque 2500cc to 3499cc car (another supreg refers to it as a Modified Marque Car over 3001cc)... this one I'm assuming:

Sandown%20MSCA%20Sprint%20-%2022%20June%202008%20539%20-%201.jpg

I've also got some questions about the regs wit regards to wheels and modifications allowed, but I'll wait for some responses to this one first.

Link to comment
https://www.sau.com.au/forums/topic/280729-msca-classification/
Share on other sites

not familiar with the local MCSA rules, but turbos have a 1.7 multiplier on capacity. So if class C is up to 2000cc the silvia won't make it. You would be 1998x1.7 = 3397.

Don't know about the "marque" bit, under normal cams rules s14 fits into category 2 (sports cars) and normally production sports cars

If they did in fact run a turbo penalty, then the car should be in Class D (2500cc-3499cc) as its a Marque car. Which is alright I suppose. Dunno why the S14 I was looking at was classified as a Non-Marque Car?

It should be in D, if it is in the CAMS Marque Sports Cars list.

Talk to Gerhard ([email protected]) - he's the comp sec and MSCA rep for NDSOC. You could also talk to Jeremy ([email protected]) - he runs a 200SX (highly modded, and quick!) - that's him in your first post.

Only rule I would look out for is to do with tyres - racing tyres (not road-use approved), then you will be in Race class.

cheers fellas, knew I'd get more answers in here.

looking into getting into club sprints, and MSCA seems to be the easiest to get involved with, and the rules don't seem too constrictive.

Ideally I'd like to build the car as a drift car, but also be able to use it on the sprint days. So I want to make sure any mods I do are kosher by both regs. Stuff like wheels are fine, I can swap those for factory ones (not sure, but I read that you're allowed to run 2" wider if supplied by factory, but if you run aftermarket you have to run the same width as factory supplied?).

I want to try and keep it out of the race class as I don't really have the budget to mix it up with the big boys yet. Plus the car's gonna be a gradual build and as I'm a complete newbie at sprints I wanna work on lines and technique first in a relatively unmodded car, just enough safety and stopping mods to keep me out of trouble.

I'll try and drop by on Wed. Are they OK with randoms bugging them about regs n stuff?

cheers fellas, knew I'd get more answers in here.

looking into getting into club sprints, and MSCA seems to be the easiest to get involved with, and the rules don't seem too constrictive.

Ideally I'd like to build the car as a drift car, but also be able to use it on the sprint days. So I want to make sure any mods I do are kosher by both regs. Stuff like wheels are fine, I can swap those for factory ones (not sure, but I read that you're allowed to run 2" wider if supplied by factory, but if you run aftermarket you have to run the same width as factory supplied?).

I want to try and keep it out of the race class as I don't really have the budget to mix it up with the big boys yet. Plus the car's gonna be a gradual build and as I'm a complete newbie at sprints I wanna work on lines and technique first in a relatively unmodded car, just enough safety and stopping mods to keep me out of trouble.

I'll try and drop by on Wed. Are they OK with randoms bugging them about regs n stuff?

Jeremy is a great guy and no doubt would be happy to answer any questions about the car or class etc

cheers fellas, knew I'd get more answers in here.

looking into getting into club sprints, and MSCA seems to be the easiest to get involved with, and the rules don't seem too constrictive.

It used to be that you had to be a member of one of the MSCA clubs. I haven't been involved in the organisation side for a few years, so I'm not sure if that is still applicable.
Ideally I'd like to build the car as a drift car, but also be able to use it on the sprint days. So I want to make sure any mods I do are kosher by both regs. Stuff like wheels are fine, I can swap those for factory ones (not sure, but I read that you're allowed to run 2" wider if supplied by factory, but if you run aftermarket you have to run the same width as factory supplied?).

I want to try and keep it out of the race class as I don't really have the budget to mix it up with the big boys yet. Plus the car's gonna be a gradual build and as I'm a complete newbie at sprints I wanna work on lines and technique first in a relatively unmodded car, just enough safety and stopping mods to keep me out of trouble.

I'll try and drop by on Wed. Are they OK with randoms bugging them about regs n stuff?

We're all here for the same reason - pretty sure they won't mind.
Curries on a racetrack... i dunno whats more dangerous

:angry:

that's generations of driving like taxi drivers, tailgating and cutting people off... i think I'll be right at home on a racetrack.

actually I'm more worried that my car is candy pink. will undoubtedly need to be stripped n resprayed if i don't wanna become the laughing stock of MSCA.

  • 3 weeks later...
that's generations of driving like taxi drivers, tailgating and cutting people off... i think I'll be right at home on a racetrack.

actually I'm more worried that my car is candy pink. will undoubtedly need to be stripped n resprayed if i don't wanna become the laughing stock of MSCA.

Both Jeremy and Simon are now in Class D (which is marque sports cars). Lindsay has changed the classification for the 200SX, but my 180SX remains in class J.

Sash

that's generations of driving like taxi drivers, tailgating and cutting people off... i think I'll be right at home on a racetrack.

actually I'm more worried that my car is candy pink. will undoubtedly need to be stripped n resprayed if i don't wanna become the laughing stock of MSCA.

Pfft we've been running pink S15's in production racing for years. It just makes you stand out and be remembered even if it's for all the wrong reasons :D

  • 4 months later...

Funkymonkey I have been sprinting in Victoria on and off for about 7 years, and I have run with a few different clubs including MSCA, FFCC, HSVOC, Winton Sprint series and some others I can't recall, and I can honestly say you would be wasting your time and money running MSCA events. I'm not going to shit-can them in public, but please PM me if you want to know why I don't recommend running with them. As far as HSVOC, WRX club and FFCC, I have run events with all these clubs in my MkII Escort and had a great day, I seriously recommend you run with these guys before MSCA. I know there were a few Silvias/S200s running with the WRX guys so if you wanted to talk to people experienced at running a car similar to yours that's where I'd start.

interesting... Ash yeah I was thinking of starting out with the SAU/WRX track days, but wanted to make sure I didn't start chucking too much money into the S14 instead of the R32, cos the only reason I'd pick the former is because it's eligible for a more advantageous class if I did eventually get serious about it.

atm tho I think the more track days I get to, the better, regardless of car. no point for trying to plan years down the track.

actually I'm more worried that my car is candy pink. will undoubtedly need to be stripped n resprayed if i don't wanna become the laughing stock of MSCA.

i'm sure most people are quite used to seeing pink and brown an inch away from each other... you'll be fine

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Apexi SAFC - AFC 1st Generation Rare Old School JDM As you can see it all lights up in the photos and is in 100% working condition. Has been kept in storage and boxed for years there won’t be to many like this if any! Especially with all original packaging and manual. price:$650   APEXi SAFC 2  In Complete Working Condition Refer To Photos and view the video provided.  Price:$500   Located Melbourne - Australia Wide Postage Available At Buyers Expense  IMG_6981.mov
    • wow so i just logged back in after buying the 33 and joining SAU, And I've got all a whole bunch of you wanting to know more, well unfortunately it still doesn't run i was hoping it was seized from a snapped timing belt as i turned it over by hand and it was fine and then it did a few revolutions and jammed solid when i was running it with the key, so the timing belt is mint, I've also found a lot of the parts I'm removing have already got bolts undone or not quiet tight enough to be unsuspicious. so the plan is to find a running RB30 block and chuck my head on it.  I have a habit of buying stuff I don't need or require so for my none running engine i have a forward facing plenum , Apexi power fc, 40mm Turbosmart wastegate, And for the car its self coilovers ,low seat rails and BRZ seats (black seats with red stitching i already had these and they are ADR Approved and allow rear passengers access)  
    • I took apart the dash and found this strange 2 pin connector. it dosen't seem like its factory or oem, any clue on why someone would add it and where it might have been connected too?    
    • Not mention a SS2 especially with that rear oddly small rear housing. I feel the Facebook mechanics and experts has led OP in the wrong direction.
    • Won't get near 400kw, pump and injectors nowhere big enough. Bin the manifold and get off the shelf and a modern ECU.
×
×
  • Create New...