Jump to content
SAU Community

Recommended Posts

Hey guys, I'm looking at preparing a locally delivered S14 200SX for track use, and I wanted to make sure I stayed within the rules n regs of the MSCA in case I get around to competing in their sprints.

Now AFAIK the car is eligible under their marque cars, but what I'm confused about is which category it fits in under. Now the SR20 being a 1998cc engine should be a Class C Marque car right? The only cars I can find in Class C are CRX's and Elise's. Is there some sort of penalty for turbo cars that aren't covered in the Sup Regs i'm reading?

The only person I could find who races a 200sx s14 in VIC is Simon Hall, and he seems to be lumped in Class J, which according to the sup regs is Non Marque 2500cc to 3499cc car (another supreg refers to it as a Modified Marque Car over 3001cc)... this one I'm assuming:

Sandown%20MSCA%20Sprint%20-%2022%20June%202008%20539%20-%201.jpg

I've also got some questions about the regs wit regards to wheels and modifications allowed, but I'll wait for some responses to this one first.

Link to comment
https://www.sau.com.au/forums/topic/280729-msca-classification/
Share on other sites

not familiar with the local MCSA rules, but turbos have a 1.7 multiplier on capacity. So if class C is up to 2000cc the silvia won't make it. You would be 1998x1.7 = 3397.

Don't know about the "marque" bit, under normal cams rules s14 fits into category 2 (sports cars) and normally production sports cars

If they did in fact run a turbo penalty, then the car should be in Class D (2500cc-3499cc) as its a Marque car. Which is alright I suppose. Dunno why the S14 I was looking at was classified as a Non-Marque Car?

It should be in D, if it is in the CAMS Marque Sports Cars list.

Talk to Gerhard ([email protected]) - he's the comp sec and MSCA rep for NDSOC. You could also talk to Jeremy ([email protected]) - he runs a 200SX (highly modded, and quick!) - that's him in your first post.

Only rule I would look out for is to do with tyres - racing tyres (not road-use approved), then you will be in Race class.

cheers fellas, knew I'd get more answers in here.

looking into getting into club sprints, and MSCA seems to be the easiest to get involved with, and the rules don't seem too constrictive.

Ideally I'd like to build the car as a drift car, but also be able to use it on the sprint days. So I want to make sure any mods I do are kosher by both regs. Stuff like wheels are fine, I can swap those for factory ones (not sure, but I read that you're allowed to run 2" wider if supplied by factory, but if you run aftermarket you have to run the same width as factory supplied?).

I want to try and keep it out of the race class as I don't really have the budget to mix it up with the big boys yet. Plus the car's gonna be a gradual build and as I'm a complete newbie at sprints I wanna work on lines and technique first in a relatively unmodded car, just enough safety and stopping mods to keep me out of trouble.

I'll try and drop by on Wed. Are they OK with randoms bugging them about regs n stuff?

cheers fellas, knew I'd get more answers in here.

looking into getting into club sprints, and MSCA seems to be the easiest to get involved with, and the rules don't seem too constrictive.

Ideally I'd like to build the car as a drift car, but also be able to use it on the sprint days. So I want to make sure any mods I do are kosher by both regs. Stuff like wheels are fine, I can swap those for factory ones (not sure, but I read that you're allowed to run 2" wider if supplied by factory, but if you run aftermarket you have to run the same width as factory supplied?).

I want to try and keep it out of the race class as I don't really have the budget to mix it up with the big boys yet. Plus the car's gonna be a gradual build and as I'm a complete newbie at sprints I wanna work on lines and technique first in a relatively unmodded car, just enough safety and stopping mods to keep me out of trouble.

I'll try and drop by on Wed. Are they OK with randoms bugging them about regs n stuff?

Jeremy is a great guy and no doubt would be happy to answer any questions about the car or class etc

cheers fellas, knew I'd get more answers in here.

looking into getting into club sprints, and MSCA seems to be the easiest to get involved with, and the rules don't seem too constrictive.

It used to be that you had to be a member of one of the MSCA clubs. I haven't been involved in the organisation side for a few years, so I'm not sure if that is still applicable.
Ideally I'd like to build the car as a drift car, but also be able to use it on the sprint days. So I want to make sure any mods I do are kosher by both regs. Stuff like wheels are fine, I can swap those for factory ones (not sure, but I read that you're allowed to run 2" wider if supplied by factory, but if you run aftermarket you have to run the same width as factory supplied?).

I want to try and keep it out of the race class as I don't really have the budget to mix it up with the big boys yet. Plus the car's gonna be a gradual build and as I'm a complete newbie at sprints I wanna work on lines and technique first in a relatively unmodded car, just enough safety and stopping mods to keep me out of trouble.

I'll try and drop by on Wed. Are they OK with randoms bugging them about regs n stuff?

We're all here for the same reason - pretty sure they won't mind.
Curries on a racetrack... i dunno whats more dangerous

:angry:

that's generations of driving like taxi drivers, tailgating and cutting people off... i think I'll be right at home on a racetrack.

actually I'm more worried that my car is candy pink. will undoubtedly need to be stripped n resprayed if i don't wanna become the laughing stock of MSCA.

  • 3 weeks later...
that's generations of driving like taxi drivers, tailgating and cutting people off... i think I'll be right at home on a racetrack.

actually I'm more worried that my car is candy pink. will undoubtedly need to be stripped n resprayed if i don't wanna become the laughing stock of MSCA.

Both Jeremy and Simon are now in Class D (which is marque sports cars). Lindsay has changed the classification for the 200SX, but my 180SX remains in class J.

Sash

that's generations of driving like taxi drivers, tailgating and cutting people off... i think I'll be right at home on a racetrack.

actually I'm more worried that my car is candy pink. will undoubtedly need to be stripped n resprayed if i don't wanna become the laughing stock of MSCA.

Pfft we've been running pink S15's in production racing for years. It just makes you stand out and be remembered even if it's for all the wrong reasons :D

  • 4 months later...

Funkymonkey I have been sprinting in Victoria on and off for about 7 years, and I have run with a few different clubs including MSCA, FFCC, HSVOC, Winton Sprint series and some others I can't recall, and I can honestly say you would be wasting your time and money running MSCA events. I'm not going to shit-can them in public, but please PM me if you want to know why I don't recommend running with them. As far as HSVOC, WRX club and FFCC, I have run events with all these clubs in my MkII Escort and had a great day, I seriously recommend you run with these guys before MSCA. I know there were a few Silvias/S200s running with the WRX guys so if you wanted to talk to people experienced at running a car similar to yours that's where I'd start.

interesting... Ash yeah I was thinking of starting out with the SAU/WRX track days, but wanted to make sure I didn't start chucking too much money into the S14 instead of the R32, cos the only reason I'd pick the former is because it's eligible for a more advantageous class if I did eventually get serious about it.

atm tho I think the more track days I get to, the better, regardless of car. no point for trying to plan years down the track.

actually I'm more worried that my car is candy pink. will undoubtedly need to be stripped n resprayed if i don't wanna become the laughing stock of MSCA.

i'm sure most people are quite used to seeing pink and brown an inch away from each other... you'll be fine

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Nah it factory manual not sure about ratio but it looks like there’s been some work at the rear 
    • so I need a new speedo cable 
    • Throwing my spoon to the soup here a bit.  When I installed a 044 back in 2012, along with the direct power mod, the car became very difficult to start. To a point I burned one starter motor as I was late for work and tried to get the thing going. With some tuning and careful use of gas pedal when cranking it became bearable. Trying to make this short as possible, but the 044 died after 2-3 years, after which I went with an AEM 320lph pump, which also died after about 4 years to my dismay. After that I went with a Nismo pump, and while trying diagnose an emissions problem, I noticed for the first time that my fuel pressure was 5bar/72psi on idle, and that removing the vacuum line did nothing. After monitoring the situation, and removing the direct power feed and going back to FPCM in attempts to remedy it, I noticed there was fuel in the pressure regulator vac line. Kept the FPCM, installed AEM external regu and the car became sooo much better in every way, including starting. And I had driven it like it was for 11 years.. Anyway, I agree these are likely two different problems, and the FP problem you just haven't noticed before. I do not know much about haltecs, but what first came to mind was the CAS, which probably is not there any more. So how is the wiring from haltec to gauge cluster? How is the battery voltage and alternator?
    • Your car was auto before? You have different diff ratio (auto vs manual i think? or n/a and turbo?)
    • +1 for getting a screen off alibaba, CarPlay/Android Auto is vastly better than whatever navigation cars had 10 years ago. I got an Android screen for my 2015 BMW, huge difference. Fully compatible with factory stuff including iDrive controls.
×
×
  • Create New...