Jump to content
SAU Community

Recommended Posts

Hi Guys,

got some garret 28/60-10's hks gtr's equivilant for sale , just took them off my car as i went for a different set up , had them checked by my mechanic and gcg in sydney they both said turbos in good condition , they have been on car for less then 15,000 km's , they come with standard actuators

Price $2000

I Can send pictures if requested

Please send pms as i dont come on much .

Thanks

Link to comment
https://www.sau.com.au/forums/topic/280885-gtr-turbos/
Share on other sites

I was at gcg today getting a quote for a highflow for my r34, Moei brought these turbos in for inspection. The guy at GCG said they seemed to be in very good condition and if i remember correctly said they were not very easy to come by anymre and retail for $3500. :|

Good luck with the sale buddy, and thats a very nice looking car you got there :starwars:, sounds mean as on idle.

Link to comment
https://www.sau.com.au/forums/topic/280885-gtr-turbos/#findComment-4737752
Share on other sites

Stevo - No Clue man how do i tell i forgot to ask GCG That , all i know is they made 330 kw's on my GTR On 18psi on a unopened motor , my friend same turbos making almost 400kws on a built motor mabye that helps ?

Zee - good to meet ya , very well priced yeh but dont really need them anymore

Link to comment
https://www.sau.com.au/forums/topic/280885-gtr-turbos/#findComment-4737928
Share on other sites

  N1GTR said:
The main ways are; did your stock dumps line up ok? What numbers are on the rear housing (if any)?

Stev-0

Rear housing .62 , i had aftermarket dump pipes and as far as i know they lined up ok ?

Thanks

bump , they need a new home ......

Link to comment
https://www.sau.com.au/forums/topic/280885-gtr-turbos/#findComment-4738794
Share on other sites

Silly question perhaps but the 2860-10's are supposed to be simular to a HKS GTRS right? Well which turbine housing configuration makes them simular to the GTRS, because a 0.62 or 0.8x housing would make quite a diference?

Link to comment
https://www.sau.com.au/forums/topic/280885-gtr-turbos/#findComment-4741991
Share on other sites

  GTRNUR said:
Silly question perhaps but the 2860-10's are supposed to be simular to a HKS GTRS right? Well which turbine housing configuration makes them simular to the GTRS, because a 0.62 or 0.8x housing would make quite a diference?

Hey GTRNUR good question ,

as far as i know and i did ask GCG They told me that power wise there isnt much difference between the 2 rear housings , infact he told me .82 rear housing makes a little more power but also has more lag , in terms of which one is similar to hks gtr's configuration i cannot tell you .

Thanks

Link to comment
https://www.sau.com.au/forums/topic/280885-gtr-turbos/#findComment-4742693
Share on other sites

  MRGTR911 said:
Hey GTRNUR good question ,

as far as i know and i did ask GCG They told me that power wise there isnt much difference between the 2 rear housings , infact he told me .82 rear housing makes a little more power but also has more lag , in terms of which one is similar to hks gtr's configuration i cannot tell you .

Thanks

GT-RS have .64 rears

cheers

Lee

Link to comment
https://www.sau.com.au/forums/topic/280885-gtr-turbos/#findComment-4745408
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Does anyone know what the centreline should be for the vct intake cam? On my cam spec card it just says VARI and doesn’t actually tell me what the centreline should be. I had to adjust my exhaust cam gear by about 5 degrees advanced so I’m guessing I would have to adjust my intake as well? Current intake centreline is 119 deg. Iv already asked kelford and they won’t respond, It’s the 246-A 262 cams.  thanks for the help guys 
    • Get a timing light on it and verify it's sparking reliably at a sane ignition timing. Use a COP extension lead to be 100% sure about timing instead of hoping that the timing loop on the back of the engine is accurate. Make sure it's actually injecting fuel. MAF is not used on the stock ECUs for initial cranking.
    • RE5R01A is the transmission. Didn't realize they had a 5 speed for the NA cars but for some reason the turbo engines stuck to 4 speeds. Looks like the solenoid block is still available from Nissan directly at a somewhat reasonable price: 31940-60X01 https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/skyline/er33/6568-rb25de/trans/317 I would move sooner on this than later. The moment the de minimis exception for Japan goes away expect to be paying 25% tariffs even for stuff like this.
    • Only RB26 are low from factory. And even then the ECU actually want high impedance, because it's essentially the same ECU as the RB20 anyway, and thus they have a f**king resistor pack!
    • Is this preventable by priming the system with external oil pressure? I've seen the speed academy folks hook up an external oil priming system to the oil pressure sensor port with an air compressor to check for oil leaks before putting an engine back in a car. Something like this: https://www.jegs.com/i/JEGS/555/23550/10002/-1?gPromoCode=SPRINGINTOSPEED_APR25_5Off&gQT=1
×
×
  • Create New...