Jump to content
SAU Community

Value Of R35 Engine And Transmission


[200]
 Share

Recommended Posts

Hi,

I am interested if anyone could put a value on a 2009 R35 engine and transmission with about 3,000 miles on the dash?

Its my understanding that it cannot be purchased from a dealership as such correct?

Cheers

Link to comment
Share on other sites

I have heard notional figures of AU$45k for the transmission and AU$75k for the engine (new prices) regardless of IF they can be purchased. Not that you would buy a crate motor for $75k (if you could) you would instead build something better etc.

If you have need of one and can get it cheap, grab it!

Link to comment
Share on other sites

LSX-438, happen to know what a set of brakes are? Endless do a sweet adaptor kit to fit them to an older series R32/33/34 GTR.

If you were to ask for a complete OEM Nissan pad and rotor swap, i believe it will be in the vicinity of $8000 to $10,000 (and that doesnt include calipers nor lines). A full brake system would surely be $20k or more. This is for ordinary cast iron & cross drilled rotors mind you. However most people are buying aftermarket pads and rotors, which are about half these prices (and better spec too). If you have an OEM motor/gearbox/brake system and want to offload it, PM me please.

Link to comment
Share on other sites

If you have an OEM motor/gearbox/brake system and want to offload it, PM me please.

I wish...

I asked the question to see if it would be worth buying the R35 calipers themselves along with some Endless adaptors and some aftermarket discs. That would be a sweet stopping package for a 200kg lighter older series GTR (like mine).

Sorry, off topic.

Link to comment
Share on other sites

If you were to ask for a complete OEM Nissan pad and rotor swap, i believe it will be in the vicinity of $8000 to $10,000 (and that doesnt include calipers nor lines). A full brake system would surely be $20k or more. This is for ordinary cast iron & cross drilled rotors mind you. However most people are buying aftermarket pads and rotors, which are about half these prices (and better spec too). If you have an OEM motor/gearbox/brake system and want to offload it, PM me please.

So if something like this was to be wrecked you might be interested in some parts?

gtr01.jpg

gtr02.jpg

Link to comment
Share on other sites

expensive.. weeeeee

Hey idiot, leave the stupid comments out of the thread - their not welcome here.

Judging by the posts it looks as though you're trying to get your post count up - typical. You're not contributing anything at all,

eg

Exhibit 1

Exhibit 2

Exhibit 3

:) :) :)

Don't reply with shit that doesn't contribute!!

Link to comment
Share on other sites

good luck with trying to get it over here mate....im sure if you did, youd basically be able to name your price on anything in it....plus the running gear would be an awesome retro fit into something like a 240/260z :P

Link to comment
Share on other sites

yes we looked at buying it must be 6 months ago or more now. hopefully it's been well stored and is still in good condition. I thought it sold on ebay US?

the stuff is only worth what someone is willing to pay. but consider you could buy a wreck in japan for around $40K (or less) and import that as a parts car and I'd consider very carefully before you spend any decent time or money bringing it out here hoping to get $100K+ for all the bits.... JDM wreck would also be more desirable as it's RHD. also, that car was pretty heavily crashed, there have been a few wrecks around with less damage going for pretty fair money.

Link to comment
Share on other sites

good luck with trying to get it over here mate....im sure if you did, youd basically be able to name your price on anything in it....plus the running gear would be an awesome retro fit into something like a 240/260z :P

Oh my young friend.... if only you knew how difficult that task would be. You'd swear these 35's have a brain of their own, they know what you're doing to them, even without a battery in them! lol

Link to comment
Share on other sites

I am considering getting the engine, transmission and brakes taken out and having them sent here... hmm, decisions...

This one looks nicer...

10946389_4X.jpg

redr35.jpg

Edited by [200]
Link to comment
Share on other sites

good luck with trying to get it over here mate....im sure if you did, youd basically be able to name your price on anything in it....plus the running gear would be an awesome retro fit into something like a 240/260z :)

someone do that please!!!

i couldn't see that black wreck fetching more than 25k

are you in the states? if not id get someone who has half a mechanical brain to check it out, and id assume with the new GTR a multimeter would come in handy to check all the electrics.

Link to comment
Share on other sites

someone do that please!!!

i couldn't see that black wreck fetching more than 25k

are you in the states? if not id get someone who has half a mechanical brain to check it out, and id assume with the new GTR a multimeter would come in handy to check all the electrics.

Being done ...

I might just bring the engine, transmission and brakes over and see how things go from there. It's all that's really useful on the black one.

Link to comment
Share on other sites

Dude. Just put a price on it & see what happens. No-one here will put there hand up unless you put your balls on the wall & see what happens. Looks like a gamble to me. These things are that fast I dont think it will be long before we see a few local ones on the market like that (of course I hope not - but lets wait & see)

20 years to catch up? Hmmm. Didnt see Porsche at Bathurst 20 years ago. (But I was too busy drag racing Holdens back then to care anyway!!!)

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share



  • Similar Content

  • Latest Posts

    • That's the most absurd thing I've ever heard. I would go cut bellhousing over that monstrosity of a flywheel all day, every day. It puts a lot more mass further from the last main bearing. I've had nothing but problems with Collins in the past and refuse to ever buy their products again. I would not trust anything they tell you. He's playing his salesman card.  I'm currently at 640whp on a mustang dyno (~770bhp) with the intentions of running E85 and a lot more power this upcoming spring. Cheers, 
    • Nah, it's not the reduced knock margin. It is a direct mechanical effect of having to initiate the combustion earlier, while the piston is still rising, which starts to exert combustion pressure on the rising piston earlier, making the rest of the engine work harder to finish driving the piston up to TDC where the combustion pressure stops being a negative and starts being a positive. Your modern engine that only needs ~10° to make MBT doesn't waste the other 10 or so degrees of crank rotation. That's almost all of it. The difference in knock margin might go either way. Remember that modern engines to which you are currently comparing the long tractor engine (the RB) are now running super high compression, direct injection, tricky cam control and maybe even cylinder pressure sensors. You're not comparing apples with other fruit. It's apples and sea weed, or some other evolutionarily primitive vegetation. And remember, squish only really comes into play at the very end of the stroke. It certainly does good things, but it is not the biggest contributor to what's going on. It is quite possibly much less important in 4 valve head than 2 valvers also, because there is so much less squish available to a 4 valve anyway.
    • Food for thought, a longer stroke motor would need less ignition timing vs. a shorter stroke motor requiring more ignition timing.
    • Thanks Duncan, HART is only 10 mins from me (I did my bike license there), it'd be awesome if it ran these types of things.  Sutton Road does look good and they take fewer cars than SMSP which is good.  Surely you have enough land to lay a few million tonnes of concrete and some sprinklers D? 
    • I thought an engine that needs more ignition timing to make power is going to result in less power due to reduced knock margin? More time for the combustion to propagate -> more time for it to heat up the rest of the mix to detonation.
×
×
  • Create New...