Jump to content
SAU Community

Replacing R34 Gtt Pop Up Screen With Triple Cluster

99 GTT

By 99 GTT,
in Tutorials / DIY / FAQ

 Share

Recommended Posts

99 GTT Rising Star

99 GTT

Posted
Posted

Please feel free to add to this if i have left anything out.

I have been looking through the forums and have noticed that alot of people are wanting to do this mod. I have put a small DIY together to try and help with the rewiring of the unit with a basic diagram.

After removing the Xanavi screen, you will need to splice the some longer wires onto the triple cluster loom so to be able to enter the engine bay

and connect the oil temp sensor and boost sensor as shown in the following attachment. (Note the boost and oil temp sensors cannot connect direct to ECU as these sensors are different)

post-41401-1249141460_thumb.jpg

The second and easiest option is to use the factory loom Part Number: 24018-AA500. To do this you will need to remove the main cluster about 7 screws from memory. Now this should be as simple as plug and play to the factory loom. (Please note i have not verified this method as yet but as Nissan only make one Main Loom for the GTT the plug should be there)

post-41401-1249142906_thumb.jpg

I hope the above helps someone and as last stated if something is wrong please correct me...

I can also help with MFD conversion into R32, R33, R34 Skyline Turbo or non turbo. Easy to follow DIY to come..

Safe Driving Everyone.. :)

;) 0o SKYLINE o0 :(

  • 1 month later...
Carbon 34 Grand Master

Carbon 34

Posted
Posted
do you have any idea how to put GTR MFD to R34 non-turbo? do i have to cut the dashboard?

thanks

pretty sure the little panel unscrews just like the GTT , remove the air vents to see ? two phillips head screws are hidden behind it and slide it out towards you. the wiring is taped down on the harness .

still trying to ponder why you would ditch the screen rather then use a Computer input to display the gauges in digital format but to each his own ?

putraged Rising Star

putraged

Posted
Posted
pretty sure the little panel unscrews just like the GTT , remove the air vents to see ? two phillips head screws are hidden behind it and slide it out towards you. the wiring is taped down on the harness .

still trying to ponder why you would ditch the screen rather then use a Computer input to display the gauges in digital format but to each his own ?

i got a deal for MFD, it cost me total 400. instead of ugly gauges i pillar A, i'll put 3-way sound system. but my R34 25gt didnt have any gauges in the middle dash. and there are no marks for me to open the dashboard and gain access to gauges mounting brackets. might as well cut the middle dash with dremel and create new brackets?

  • 3 years later...
mcconnachie Rookie

mcconnachie

Posted
Posted

i got a deal for MFD, it cost me total 400. instead of ugly gauges i pillar A, i'll put 3-way sound system. but my R34 25gt didnt have any gauges in the middle dash. and there are no marks for me to open the dashboard and gain access to gauges mounting brackets. might as well cut the middle dash with dremel and create new brackets?

i know this is old but what did you end up doing? my r34 GTT didn't come with any gauges in the middle nor a TV? i want to put the gauges is and im unsure how.

Any ideas?

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • KyoyaR33
      Rebuilt Rb25det issues

      By KyoyaR33 · Posted

      I don’t really have any ideas how to set the timing on the CAS 😂, sounds like the top, sounds like it maybe misfiring as well as ticking,  got the box sorted 😌, must of been a air bubble on the clutch side
    • GTSBoy
      Rebuilt Rb25det issues

      By GTSBoy · Posted

      Use a 2' length of hose (that's 2 foot, not 2 inches) as a stethoscope to localise the source of the ticking. From cam covers? From exhaust or turbo manifold gasket? From injectors? From lower down in the engine? Etc. Use a timing light to set the timing. Put Redline Lightweight Shockproof in the box. It's not the very best thing for the box, but it will take a box that refuses to engage a gear with other oil, and make it engage a gear. I had to put it in when I installed the R33 box I have in my car. It would not select ANY gear when running. Smurf jizz made it work. That was >10 years ago and I still use it. I'm stuck with it now. Failing that - rebuild the box.
    • Victory
      Neil's R33 Gts-t Build

      By Victory · Posted

      Well done Duncan. The fuel tank bulkhead lid is also in great condition (some of mine were stuffed). These are now out of production and good ones like that are becoming hard to come by.
    • Milkmun
      S15 Spec R

      By Milkmun · Posted

      Wow that's a steal, you've done well there. 
    • trey318
      r34 gtt led globes

      By trey318 · Posted

      Exterior LEDs R34 2Dr R34 4Dr Position Lamp T10 T10 Winker front T20S T20S side T10 T10 rear T20S S25S150 Anti-hyfla relay TYPE3 TYPE3 tail T10 T20W Stop Lamps T20W T20W High Mount T16 T16 back T16 T20S number T10 T10 trunk T10 T10 Interior LED Item No.     Map Lamp BA9S single-sided     Room Lamps T10×31     Trunk Lamp T10     meter Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     Liquid crystal section T6.5 pedestal     Winker T6.5 pedestal     High Beam T6.5 pedestal     3 SERIES METER Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     air conditioner Early Liquid Crystal T3     Late LCD T4.2 Short     button T4.2 Middle     Hazard SW T3 Pedestal Short     Keyring T5     Cigar Socket T5
×
×
  • Create New...