Jump to content
SAU Community

R33 Gearbox, Pair Recaro Sr3, Z32 Afm + Tomei Plug, Kts Swaybars, Apexi Pen Turbo Timer, Rb Xtreme Motorsport Clutch

nigelswazi
 Share

Recommended Posts

nigelswazi Mentor

nigelswazi

Posted
Posted (edited)

After the weekends garage cleanout I have the following parts I no longer need. All parts in Adelaide will post at buyers expense - Updated 2/8

--------------------------------------------------------------------------------------------------------------

R33 GTS-T Manual Gearbox from a 76,000Km stock car complete with the shifter and boot ready to bolt straight in. The gearbox is in excellent condition with beautiful smooth changes.

Price - $1250 FIRM

r33gearbox.th.jpg

--------------------------------------------------------------------------------------------------------------

Pair of mint Genuine Recaro SR3 Reclinable Race seats complete with recaro drivers and passengers base frames ready to bolt into R32 R33 R34 Cefiro and with a small bracket these would fit S13-S14. As the seats are Recaro complete with Recaro Base Frames I have had no problems with defects and these seats having rolled through regency with them.

Price - $1000 FIRM for the pair or will seperate if buyers for both

recarodrivers.th.jpgrecaropassengers.th.jpg

--------------------------------------------------------------------------------------------------------------

Bosch Z32 AFM complete in box with Tomei plug. Item is basically new was used for a couple of dyno runs

Price - $270 Delivered

--------------------------------------------------------------------------------------------------------------

Japanese KTS Front and Rear Aftermarket Swaybars originally off a R34 GT-T but fitted my R33 GTS-T perfectly complete with recently fitted new SuperPro D Bushes on the front bar. The bars are 27mm Front and 22mm Rear.

Price - $300 FIRM Pair

ktsswaybars.th.jpg

--------------------------------------------------------------------------------------------------------------

Apexi Pen Turbo Timer as new complete in box bought from Autobarn and as such has english manuals aswell as jap

Price - $100 Delivered

apexipenkit.th.jpgapexipenkitcloseup.th.jpg

--------------------------------------------------------------------------------------------------------------

Front Pair of Cusco Pillow Ball Upper Mounts to suit R32 R33 R34 & C34. The mounts are complete inbox with manuals etc having only been trial fitted before changing suspension setup for the third time. The Cusco pillow ball upper mounts enable improved steering performance, stability and braking. Features: Controls unwated forces during acceleration, braking and cornering +

Improves steering response and performance, increasing stability during turn in and braking.

Price - $250 Delivered (These are $353 from Nengun) Pictures are at the bottom of this thread

cuscopillowball.th.jpg

--------------------------------------------------------------------------------------------------------------

Xtreme Motorsport Clutch + Lightened Flywheel to suit RB25 (pretty sure would fit RB20 too) used for 200kms since new. Clutch features the completely re-designed pressure plate giving a nice soft pedal feel. Only selling as I have sourced an ATS Carbonetics Clutch to match my ATS Carbonetics 2 Way LSD.

Price - $600 (Was purchased for $1500)

--------------------------------------------------------------------------------------------------------------

Location - Adelaide will post at buyers expense

Contact - PM or SMS 0404998591

Edited by nigelswazi
Link to comment
Share on other sites
nigelswazi Mentor

nigelswazi

Posted
  • Author
Posted

UPDATE 5/8/09

R33 GTS-T Gearbox SOLD PENDING FULL PAYMENT

Z32 AFM SOLD PENDING PAYMENT

The following is still for sale

Pair of mint Genuine Recaro SR3 Reclinable Race seats

Japanese KTS Front and Rear Aftermarket Swaybars

Apexi Pen Turbo Timer

Front Pair of Cusco Pillow Ball Upper Mounts to suit R32 R33 R34 & C34

Xtreme Motorsport Clutch + Lightened Flywheel to suit RB25

Link to comment
Share on other sites
nigelswazi Mentor

nigelswazi

Posted
  • Author
Posted
willing to seperate the swaybars? interested in the front only, how much post to melb?

I have had a lot of requests to split if I were to split would be $160 for Front and $140 for Rear as the front has the as new Urethane D Bushes.

Due to size I don't believe Australia Post will take them so would have to be a courier at around $30 to your door in VIC. If Australia Post would take it around $25.

Link to comment
Share on other sites
nigelswazi Mentor

nigelswazi

Posted
  • Author
Posted (edited)
If the buyer falls through with the box PM me.

Sorry confirmed sold now

Z32 Confirmed Sold

Update 8/8/09

The following are now left for sale

Recaro - Drivers side - the all black seat as pictured above - $500 FIRM

Japanese KTS Front and Rear Aftermarket Swaybars

Apexi Pen Turbo Timer

Front Pair of Cusco Pillow Ball Upper Mounts to suit R32 R33 R34 & C34

Xtreme Motorsport Clutch + Lightened Flywheel to suit RB25

Edited by nigelswazi
Link to comment
Share on other sites
nigelswazi Mentor

nigelswazi

Posted
  • Author
Posted
Sorry confirmed sold now

Z32 Confirmed Sold

Update 8/8/09

The following are now left for sale

Recaro - Drivers side - the all black seat as pictured above - $500 FIRM

Japanese KTS Front and Rear Aftermarket Swaybars

Apexi Pen Turbo Timer

Front Pair of Cusco Pillow Ball Upper Mounts to suit R32 R33 R34 & C34

Xtreme Motorsport Clutch + Lightened Flywheel to suit RB25

BUMP

Link to comment
Share on other sites
  • 1 month later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Stivo
      R32 goes out in right curves

      By Stivo · Posted

      That's true. However, this problem has started since the tuning. First time with the return journey from the tuning. But yes, the pipe was clogged with dirt and rust. That was certainly due to age
    • Dose Pipe Sutututu
      CD009 RB Conversion

      By Dose Pipe Sutututu · Posted

      Great info @tidi0x  Will definitely be handy for others and maybe me if I decide to keep the shit box H pattern.
    • tidi0x
      CD009 RB Conversion

      By tidi0x · Posted

      Bumping this up one last time.... I wanted to follow up on the clutch slave issue. I realized that what the issue comes down to is the pocket is flat milled, and the cylinder does not want rest flat. So in order to mount it correctly you will need to make a spacer for the fingers so the cylinder is floating. I took two plates of aluminum, drilled some holes and was good. I did still need to make the relief cuts in the bell housing, as even with the spacer the bleed section still interferes. The OE bell housing the mounting holes are raised from the housing.       
    • robbo_rb180
      R32 Gtst - Track Car

      By robbo_rb180 · Posted

      If the event in USA goes ahead will be interesting as it seems the rules will get more cars over here. Apparently the track is laguna seca too. Yeah s15, if I get a the lower dash trims, centre console and change front cross member to standard LCA position will fit clubsprint. See how rules are as i would rather do complete widebody than a bolt on flare to run the 295 with proper clearance.
    • 180 wanabe
      370gt Stock Suspension

      By 180 wanabe · Posted

      If the car is legal height I can't see it being an issue. Found a thread on reddit that might offer some insight.   I got a ticket from a copper in QLD for my S15 being too low. They had this wheel thing on a stick that they put under the car and it hit my exhaust. Anyhow went to an exhaust shop to get the exhaust tucked up/hung a little higher and I wound the coilovers up a smidge. Don't think I even had to go back to the police station unlike when I got defected for having a carbon bonnet when I brought the S15 from the ACT to QLD and had to replace it and then rock up at a police station and have a yougish female officer who knew nothing about cars confirm that I had changed bonnets. Should have just painted the carbon bonnet yellow to match the rest of the car lol
×
×
  • Create New...