Jump to content
SAU Community

Recommended Posts

Might sound like like a silly question but without a detonation or knock sensor how can you tell if your engine is detonating?

Curious because not sure how much a standard internal RB20 can take before breaking conrods n big ends

everyone has a different description.

It can sound like small stones on a tin roof, or stones kicking up under the guards.

To tell - ask your tuner.

Stock RB20 innards will easily run 260rwkw day in day out.

Know of any videos of engine detonation sound? cant find any on youtube My car has these mods atm -

HKS 2530 Turbo

GTR Injectors

GTR Ballast Resistor Pack

Bosch 040 Intank Fuel Pump

Hybrid Front Mount

Z32 AFM

Turbo Back 3" Exhaust

5 Puck Brass Button Clutch

Car needs tune atm the guy i bought it off had it tuned by PITS in Qld anyone know who they are?

Apparently got 220RWKW at 16PSI

I need to get it tuned, how much boost is this setup capable of?

How long is a piece of string?

Twice the distance from the middle to the end. :)

I always thought detonation sounded like an olllld diesel hehe. Its not a nice sound, so if it does it, youl know.

Try taking off up a steep hill in 2nd. tickticktick

If detonation sounds that bad then ive not noticed it yet thank god. I dont have a tuner yet I live in Nothern NSW On the beach there isnt any good tuner shops here i was thinking of taking it to mercury motorsport for a nistune until i can save for a Power FC or whatever

yeh matt spry is claimed one of the best in QLD so u should be fine unless things have been changed since the tune.. are u askin about the sound cause u can hear it or your just worried? doesnt it feel fast?

just tryin to figure out the reason of the question

yeh matt spry is claimed one of the best in QLD so u should be fine unless things have been changed since the tune.. are u askin about the sound cause u can hear it or your just worried? doesnt it feel fast?

just tryin to figure out the reason of the question

Sounds like good news to me! The only problem with the car is its running pretty rich (it chews the fuel) and black soot covers the rear bar lol Other than that is the broken exhaust manifold stud which im about to try fix which i guess caused a bit of surge hard on the gas in 3rd or 4th

About detonation was just curious as to how much boost I could run with this setup, its pretty happy on 14psi which is fairly close to 1 bar right? (my boost guage is in BAR not psi) would 18 psi be ok you think? the guy i bought it off said 18psi is pretty fun haha

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah its a server spammer thing  Although, now that I manually approve all the accounts I can probably loosen up some of the restrictions.  
    • Thread bump, again! Although, no bad news this time. Posting for the sake of possible root cause. Basically, I rebuilt it (mostly stock), installed Haltech + sensors, had it running fine on new ECU.  Still not really understanding why it cracked pistons last time. Got to tuners, and while checking timing, noticed +-10deg of timing scatter while revving. Changed CAS, and it was rock solid. While not definitive, can't imagine seeing 20+ psi with that amount of scatter would be a good thing. Also glad I found something.   Bit more of a run down; Carried out a stock rebuild, a set of stock pistons, out of a spare bottom end. Everything stock apart from head studs and oil restrictors. (so I can pretend I didn't let the Nissan out, ha.) Armed with the measuring gear and FSM, set about doing overhaul. Oil restrictors as per oil control thread for a RB25, stock oil pump, drifting. Head drain/vent from rear of head, to passenger side of sump above oil level. Two dash 10 vent lines from drivers side of sump (unused atm) Hi octane style cam cover breather kit Splash covers over last 2 cam caps. Both breather lines from cam covers to vented to atmosphere catch can, not plumbed back into sump (wanted to see what it was actually breathing). Got it run in (did about a 1000km) no to low boost scenario, As I had questions over old ECU setup. Installed haltech +sensors for flex Retune on E85 (finding CAS Issue along the way), made 300rwkw at 20psi, out of wastegate. Did a drift day the next day (yes, it was a big weekend!) and was checking catch can throughout the day, ZERO blowby. I mean nothing. Lines from cam covers are not even wet. Done a bunch of street driving, spirited and catch can is still dry. Early days I guess, but pretty happy so far. Also now run 10w60, up from the 10w40 that I used to run. Oil pressure is significantly better, especially when hot (as you would expect)      
    • Thanks buddy. I thought it was a server storage thing. 馃ぃ
    • Perfect! Thanks for this, both look like great options!
  • Create New...