Jump to content
SAU Community

Recommended Posts

Hi all,

I would like to completely remove the HICAS system in my R34 GT-R (instead of just a cancel rod etc etc) because of the weight saving (20kg's?) and the benefits in handling but am curious to know the procedure for R34 GT-R's... I have read the threads which describe the R32/R33's but its not a complete removal... just cancel rods and not on an R34 GT-R...

Im guessing that it would be pretty much the same, (Ie - remove the rear steering arm, fluid resuviour tank/lines & motor in the boot) but I am interested to know of other R34 GT-R owners who have done this before...

Cheers,

Edited by xanavinismo
Link to comment
https://www.sau.com.au/forums/topic/281675-complete-r34-gt-r-hicas-removal/
Share on other sites

umm its not the same as a 32 at all as it's not a hydraulic system. there are no lines to the front of the car or solenoid in the engine bay to worry about. the resoviour in the boot is for attessa not hicas.

as for the actual hicas rack - the lock washer option locks the standard rack in place, or you can get a hicas lock bar to replace the standard motor. If you really want to remove it altogether you would need to convert it to an s13 style setup with tie rods instead of a hicas rack....there is some information of how we did this in our racecar in the Builds section

umm its not the same as a 32 at all as it's not a hydraulic system. there are no lines to the front of the car or solenoid in the engine bay to worry about. the resoviour in the boot is for attessa not hicas.

as for the actual hicas rack - the lock washer option locks the standard rack in place, or you can get a hicas lock bar to replace the standard motor. If you really want to remove it altogether you would need to convert it to an s13 style setup with tie rods instead of a hicas rack....there is some information of how we did this in our racecar in the Builds section

Thanks for your info duncan. So the hicas motor does weigh a fare bit? Also, does that mean I wouldnt have the problem of having the HICAS light coming on because there is no solenoid in the engine bay?

Cheers,

Glen

I found these Midori Hicas Cancellers... it looks like it will save a heap load of weight!

Link: http://www.midoriseibi.co.jp/tuning/others...-canceller.html

Also appears that they bolt up to the standard mounts where the Hicas normally goes with no bar in between what so ever. Although more expensive than a 'Cancel Rod' these seem like the closest thing to complete removal of Hicas without much fuss!

However, has anyone ever used these?

post-38738-1250344770_thumb.jpg

Edited by xanavinismo

yeah, but the brace doesnt get rid of the hicas unit itself so no real weight reduction.

just googling 'midori hicas canceller', there seems to be somewhat of a review on the product: http://minkara.carview.co.jp/userid/424045...0193/parts.aspx

not much info, but its got a pic and looks like what you're after.

  • 5 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
    • Oh yes done this when the window started flopping around.  Turns out the guides that run along the rail chanel had crumbed way. Took off the door card and pulled out the window mech, then the window, which you have to pull out through the top. As said unbolt the guide rail and don't spend 30 minutes getting frustrated trying to find a way to slide it out upwards cause that don't frigging work. Drop it down and out through the door hole. All I did to repair it was slice some 10mm clear plastic tube, vertically, then screw it to the guide rail both sides. This tubing rolls inward on both sides and leaves a gap wide enough to hold the window. To finish all I did was lube the plastic tube with olive oil and Bob's your uncle . . . well if he has the operation he can be your Aunt ! !  10 bucks in plastic tube and another 5 minute job done again . . . . YEH BULLSH#T ! My love for Skylines knows no bounds !
    • So was there a solution to this problem? I’m having this issue now. 
    • not expensive, just irreplaceable if you don't go sub 60 at wakie in that thing people will start talking
    • I haven't replaced that, but I have had the doors apart on the r32 a couple of times The door skin will be held on by a combination of clips and bolts, just take it slowly and make sure all the sneaky hidden bolts are out Once the skin is off you should be able to pop that piece off pretty easily, looks like there are only 2 bolts holding it on
×
×
  • Create New...