Jump to content
SAU Community

Rb25det Motor + Loom

DUU MA
 Share

Recommended Posts

DUU MA Contributor

DUU MA

Posted
Posted

im selling my rb25det motor comes with everything except for

turbo

ecu

starter motor

as these was taken from this motor and put on another rb25

motor has 80,000k from a rear ended write off engine ran perfect without any smoke or noises

was gonna convert my 180 but some forum member ripped me off for 2g's so now i cant finish off the project.

engine is in canberra

you'll have to call me for an inspection as im in melbourne.

$1500 ono i just want it gone

0433443055

Link to comment
https://www.sau.com.au/forums/topic/281906-rb25det-motor-loom/
Share on other sites
DUU MA Contributor

DUU MA

Posted
  • Author
Posted (edited)

sorry cant do compression test now as everything is out.

from memory i can get it delivered to melbourne for around $250 - 300 but i can double check for those interested

engine came from a 97-98 i believe. and it does come with engine mount brackets but the mounts i would say are better of getting replaced as i threw one out since i was going to used custom ones from USA for my conversion

engine does come with all wiring loom but no ecu

Edited by DUU MA
  • 2 weeks later...
Josh_TypeX Proficient

Josh_TypeX

Posted
Posted
$500 + delivery to Darwin??

lol... Details of rb20 and clutch? Details on the wreck the rb25 was taken from? Modified heavily/lightly? Any idea of the legitimacy of the kilometers?

DUU MA Contributor

DUU MA

Posted
  • Author
Posted

RB20 was in good working order and is a standard clutch. looks in excellent condish but have not tested as it never was installed on my car.

engine was a pretty much a stocka from a 33 with kit and exhaust and rims which got rear ended and KMs are as legitimate as the tacho says.

was run on 12psi boost

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • weikleenget
      R32 GTR clutch master cylinder adapters

      By weikleenget · Posted

      I replaced the whole clutch line with the chase bays braided hose, I think it removes that loop, is it the short hose that comes immediately off the slave or is there a drawing in the manual to find what you’re referring to? It was just re-bled when I upgraded to the nismo slave, old slave worked fine but I thought that might help, didn’t change a thing. It’s like the first half of the pedal is pushing air and then when it finally actuates the master the friction zone is tiny. Makes it practically impossible to launch the car
    • Kinkstaah
      MLR's Bogan cruise ship

      By Kinkstaah · Posted

      Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • The Bogan
      MLR's Bogan cruise ship

      By The Bogan · Posted

      I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • The Bogan
      MLR's Bogan cruise ship

      By The Bogan · Posted

      If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • sonicii
      Mechanic in Victoria

      By sonicii · Posted

      I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
×
×
  • Create New...