Jump to content
SAU Community

Power Fc With D1 Lm Hand Controller

Tomek
 Share

Recommended Posts

Tomek Experienced

Tomek

Posted
Posted (edited)

Item: Power fc

Age: second hand

Condition: great (hand controller colour fading)

Price: $850 delivered to your door with registered post FIRM

To Fit: GTR

Location: Townsville

Contact: pm or 0431 520 274 (Thomas)

Comments: The unit itself is in great condition, however the controller has faded in colour. Looking at the controller you can tell it wasn't from being left in the sun or bad care, the finish on these controller was not very resistant to colour fade (un-like the black) It belonged to my mechanic and has since upgraded to LINK (T51 powered 26/30 :) )

What's the Apexi D1 Limited Edition Hand Controller?

http://paulr33.skylinesaustralia.com/docs/...erfc-faq.htm#83

There was a limited build run of approx 100 units of the D1 Limited Edition D1 style hand controller. This was a gold stylish hand controller and worked just the same as the normal hand controller units. I Suspect it was a plain run of X001 hand controller to suit most models as there was only 100 made. From all that I can see its simply a gold case

Picture of Hand controller

http://www.skylinesaustralia.com/forums/post-a222086-

Model serial no.

PFC GTR33L 020 - 2306

Hand controller

FCC3 030 - 00024

$850 delivered

0431 520 274 or pm me (Thomas)

Edited by Tomek
Link to comment
https://www.sau.com.au/forums/topic/282394-power-fc-with-d1-lm-hand-controller/
Share on other sites
Tomek Experienced

Tomek

Posted
  • Author
Posted
Does the handcontroller work on any powerfc? if so ill take it if ur willing to sep

I believe it does, but un-less you can swap me a normal controller for it I won't separate it sorry.

Tomek Experienced

Tomek

Posted
  • Author
Posted
i have a r32 gtr power fc and hand controller if you willing to swap controllers

cheers

I'll ask, however don't see this happening .. much prefer a quick sale.

Tomek Experienced

Tomek

Posted
  • Author
Posted

Bump To the top

Spoke to the mechanic, buyer has the option of buying the power fc with the D1 (gold) controller or he can get a original black one..

$850 ....

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      George's R33 GTST build

      By The Bogan · Posted

      I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • shortyboy
      Drive By Wire Conversion options

      By shortyboy · Posted

      Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • pogman
      George's R33 GTST build

      By pogman · Posted

      small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Nah, not really responsible for that little fiasco, but I'm still pissed at myself for writing off my 86, or when I reversed my VX into a pole just before selling it, but, meh, 5hit happens to stuff, all it takes is a slight distraction, and life is full of distractions, and "dooh" moments   
×
×
  • Create New...