Was Running Now Wont Start.

[jacobsr20det]

Hi Everyone,

Engine: RB25DET series 2

Mods: only FMIC, POD, EXHAUST, PLENUM,

Short Story

This is a first for me (im lost) I have a project rb25 180sx that I have been building for the past 16months.\

Anyway, It starts fine drives, everything is fine.. I painted one side and after I wa finished I backed it into the garage and left it..

6 Days later I tried to start it and it wont start.

What I Have Done

I have fuel, air and spark, So I do not know what to do.. I have taken the CAS off (because it feels like a timing issue) and turned it slowly I can hear the injectors firing and have tested a few coils all have spark.. (though the spark is not as strong as I thought it would be)

Question

Could it still be the CAS? I have done a little research and these seem to be a little flakey

Please Help.

[blind_elk]

So, the engine cranks over ok? Does it sound like it wants to start? The CAS is back in the right position?

You may also have flooded the engine by now - pull the plugs and dry them off (or hold throttle full open while cranking (that allows lots of air to lean off the excess fuel).

[jacobsr20det]

The engine cranks fine, the battery is new, Does Not sound like it wasnt to start. I marked the cas before moving it.

It sounds like the timing is retard..

[blind_elk]

You re-installed the CAS on the keyway?