Jump to content
SAU Community

Recommended Posts

Hey guys, another update...

The ex is in @ hyperdrive for a few days.

Putting on an SR throttle body, a metal oil drain and finishing off the tune (finally!)

Also heard from Andrew that my turbo might be on its way out too :P

Hope its not the case but ill have to wait and see what he said after i get the car back on Monday.

Ill be looking at either a GT2871r or 2860r. ill see what 1k will get me. might have to side for a journal bearing one instead, i dont really mind.

only looking @ 8 pound boost and 240whp (the torque steer is crazy as it is @ 212wph!!)

but for now, until i can confirm that the turbo is fvcked, im gonna leave it as is, and keep the same boost level.

Stay tuned.

  • Replies 236
  • Created
  • Last Reply

Top Posters In This Topic

Wasnt the turbo just rebuilt? Rebuilding would be another option for you. Everything is set up for that turbo, so it'll bolt straight up. And it'll have enough power for you. Lag may be a bit of an issue, mine doesnt reach full boost until 4000rpm, but there are always ways around that. Smaller exhaust housing, for example.

Just another option for you. Good to hear its almost ready to go!

Hey guys, bit of an update.

Car's back from Hyperdrive with the new throttle and oil drain.

I've just got back from Malaysia too, and picked up some small goodies while i was there...

P1000769.jpg

P1000770.jpg

Found these little chrome badges and went to town on the back of the ex. And yes, I just made up my own Model designation :)

GT-L is a luxury sport version :sick: I should go to Nissan with my plan...

P1000773.jpg

Couple of HD stickers from Andrew, proud to have this on my car that's for sure...

P1000774.jpg

Sexy gold forged ally wheel nuts.3

P1000775.jpg

P1000778.jpg

P1000779.jpg

This is the (great) work that Andrew and the boys did on the throttle. Its from an SR20DE so its 65mm IIRC.

Stock one was 70mm so its not really a noticeable jump. Didn't think I'd loose any power and from driving around, it doesn't feel like i have.

Maybe a bit better low down in fact, and definitely more response - prob cos its manual instead of automated. Note the first pic of the pedal, i had to keep the stock pedal cos the sensor on it controls the 4WD split. So It wasn't just a case of using the GTi-R pedal (the cable came from a pulsar GTi-R)...

Still thinking I'll upgrade the turbo soon.

looking at a KKR430 or a 2860r - depending on funds.

I'd like the KKR cos its a little bigger, should have more power, but the 2860 is a QUALITY snail...

Both should work well on my motor I think.

But for now, the car just needs a final re-tune, the dyno was booked out last week, the new throttle changes the airflow into the engine, so that needs to be corrected...

Cam.

Is the turbo actualyl on its way out? Or just looking to upgrade anyway?

i really have no idea man, the shaft play is very minimal, doesnt blow an smoke, no noises, boosts well etc...

I'll upgrade anyway soon, cos its pretty small, i'd love something with more head room, like a 2876/71 maybe. Something good for 350-400hp.

I'm not looking for anywhere near that power level, just want something with a bit more push.

and the wheels are dirty AND need repainting, but im not gonna bother, im getting a set of these soon, as soon as money provides, thats the next thing for the car, so theres no point in painting them again i figure.

re: the writing on the tyres, i did them like that when i was going for the 4wd look, which never works that well with a soft roader lol

rest assured, new low profile tyres with said wheels wont have the 4wd look haha

Cam.

Yeah light offroad duties, beach and dirt tracks but obviously no rock hopping and mud pits.

I'm keeping the current stock wheels for some offroad tyres, so i can have offroad tyres on the stock rims, then the 19s and street tyres on the others.

Final tune should be late this week, early next week, ill call Andrew and book it in tomorrow.

haha nah no airbags i dont think...

im mainly getting the coilovers for the handling, not really gonna change the ride height too drastically....

too lowered itll look like a fkn gay minitruck sorta thing

and too high itll just look half like a tough 4wd, half like a street car. = fail.

standard ride height, maybe an inch lower would be good...

Nice build!! loving it! really hanging to see in car videos and dyno graphs when its finished!

Would definitely be worthwhile to have a look at the suspension set up, having driven an x-trail a bit before they arent great, and i would imagine it would be harder to handle with the extra power???

Thanks man, yeh stock internals are good for about 280-300whp and head gaskets are more a function of age (how old the motor is)...

You're probably familiar with a Nissan Sentra right? They share the same QR25DE motor that the x-trails have, and heaps of guys in the US put turbo kits on, there's bin bulk research done by them so i've sorta stolen all their hard work and applied it on my car...

Would definitely be worthwhile to have a look at the suspension set up, having driven an x-trail a bit before they arent great, and i would imagine it would be harder to handle with the extra power???

Yeh they do handle like a boat... Im looking at coilovers soon a company in malaysia called hotbits make x-trail specific ones, a strut brace and a bigger rear sway bar to rid of that understeer...

Good 280-300whp

SRT, Porsche Cayenne Turbo S in race did not go with them?

dont know about the porsche... never bin in one or seen one given shit, i cant imagine it being more than 280whp stock though.

i rekon id have a chance :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Oh bugger ! Your right ! Good old hydrogen sulfide. Takes me back to the good old school days ! 
    • I've owned a few scooters over the years, a Vespa PX oil burner was my first scooter, followed by a few others, including a little 50cc BeeWee that I used as a barracks bike, and I've had a blast on all of them, they really are the cheapest for of city/suburb transport around The only issue with scooters in Australia is lots of people look down on them due to their size,  maybe they need a big bike to make up for something else where they are lacking, unlike Europe and Asia where every man an their dog owns one, and now that filtering is legal in NSW, local traffic is never a issue Not to say I haven't owned my share of big cc bikes over the years, but they were for more blasting through the hills or Hwy riding where it needed to sit on Hwy speeds Safety wise, I ride like everyone is always trying to kill me, everyone is running a red, or running stop/give way signs, or generally asleep at the wheel, which most people are duringtheir commute, I also ride really safe, and give myself, and everyone else enough room in case I need to pull some hasty evasive actions, I've done a few rider training days over the years, which has come in handy on more than a few occasions  As for mods, there's nothing really, and yes your right about aftermarket exhaust, all you get is loud and obnoxious noises from them, like every 250-300 cc you hear with a aftermarket muffler, in saying this I did put a rear muffler from a 125 Aprilla on one of my old 125 scooters, it was horrendous and no amount of full face helmet and ear plugs would dampen that noise As for coming from the Harley, and what a overpriced POS that was, I no longer do big rides as my poor old busted joints ache after about 1/2 an hour of riding, long cruises are so much more enjoyable now in a car, so a big bike would be pointless   
    • Oh wow, it's easy to forget how cheap these can be. Probably the cheapest way to travel. Though people in cars here tend to be morons and I would not feel very safe. Were scooters ever big in Australia? It used to be the thing growing up in Europe ~20 years ago. 50/70/125ccm Peugeot or Yamaha and some others. Utterly obnoxious Polini race exhausts. Kick stands that slant as much as possible. So loud. So much noise for really not moving very fast at all. But it felt cool at the time. Not sure where I'm going with this, but there is an aftermarket for mopeds! Though I'd have pictured you more for a Goldwing kind of guy after growing out of the Harley.
    • You need to know I am sorry for this.  
    • As the MX5 isn't apparently "manly" enough, and I need something for runs to the local shops, and also take to my part time job at the salon, basically I can keep the MX5 away from car parks and stuff......like "flying lockers", I was wondering what I could buy to fix this issue LOL, I pick up a new Yamaha 125 Delight this arvo from Trooper Lu, basically a R1 that you can fit a slab of beer on between your feet, also, it was $29400 cheaper than a R1, so actually it's 2 x better than a R1    
×
×
  • Create New...