Jump to content
SAU Community

Recommended Posts

Hi there..second post here..but I am currently Looking for a new car towards early next year...

I am looking for an R32 Gtst or a type M. I have a dillema.

Im not sure whether to import it from say, Prestige motorsports or get one from a dealer with a 1 year warranty.

I currently have a car I would like to trade in to reduce the cost of the purchase. A dealer i have found is Sei motors in Dandenong..ever heard of them? their 92 Gtst are about $17900.

70k's and apparently immac cond /w 1year warranty.

http://www.seimotors.com.au/hotlist/dealer...=../default.asp

any other dealers out there that has better deals than these? or 17900 is pretty good? also another thing about importing is that I am very cautious about the quality of the car in whole when importing..i mean it looks good on photo but with a dealer atleast u can have a look in the interior ect or take it to a vehicle tester.....so all in all not sure what to do..i hope u guys can enlighten me on this...

thanks in advance.

Bandit.

Link to comment
https://www.sau.com.au/forums/topic/28271-need-some-expertise/
Share on other sites

17900 is the biggest rip off for an R32 I've heard of. I'm being honest here.

R32 GTSt, dun expect to pay more than 14k for one. Hell for 17k you'd get an R33 GTSt in good condition. Also check the condition of the car, 70000ks for a 11 yr old car seems a bit bogus, sumtimes it isn't but usually it is.

Check out some other import yards, there's a few around, couple in Springvale and a couple like MSI etc. Check out classic car mags for more details, that's where they usually advertise the import car yards. Mind you most cut-throat car yard ppl tend to play on your doubts if your new to the game, wheras personal importers will tell you straight out the procedure, cost and what their cut of it is. MSI I've been told have a good rep and are genuine dealers and there are a few around, you jus gotta talk to people who have been in the import scene for a while now.

I'd personally reccomend doing a personal import. Prestige is OK, but they're mostly yahoo auction cars n stuff, you gotta pay a lump sum and you never really know exactly how much you apy for each thing along the way. Another alternative is J-Spec (www.j-spec.com.au), they break down all the costs into every single cost incurred from buying the car to handing over the keys and you get recipts for everything.

As for the cars, both importers use agents in Japan, and get their agents to test the cars out etc. They let you know the condition of the car before bidding for you. I've gone thru J-Spec b4 and what they do is they give you the Jap auction report (so u know what the auction engineer thinks of the car) and also they hardly ever import a car that is less than grade 3.5 (check their website for grading) unless you tell them to.

The chances of things going wrong with either of them is very minimal, and even if they did, both companies allow you to take out warranties with an aussie company for an extra cost. (Which is still pretty much guranteed to keep your price under 15k). Keep the extra cash n fix the car up if you have to (it'll still b under 17k lol)

Anyways, hope it helps, n good luck.

Or get an R32 from someone who's selling in this forum. IMHO, I think the guys here look after their cars pretty well and may want an upgrade to something else, so it's a good opportunity to take their 32s off them. I think nark's got his car for sale?

And...uhh..I personally wouldn't dare buy something some of the import yards mentioned.

yup, buy Narks..or if you want something faster, buy Meggalas

a history and somebody who looks after their car is worth its weight in gold. Always be weary of dealers, as they are only looking for the most profits at least costs. Often that means buying cheap or damaged cars dirt cheap in japan: respraying them, slapping in the cheapest replacement engine they can find, etc.

Hey,

Great to hear that your thinking of joining the Skyline clan. I think funky has pretty much sumed it up, but the only thing I can re-iterate is, do not go to an import yard. You will find that the quality of these vehicles are well below par on what you can get either through a private sale or through import.

I personally, have a cousin who works for an import yard, and he too recommended that I by my Skyline elsewhere. Sure that must be a testament to the lack of quality at these yards. And for $17K for a R32, thats just ridiculous!

Personally, I went through j-spec, along with many a guys here on tehe forum. Didn't have too many dramas and can vouch for the quality of service from these guys. I mean, my Skyline is probably the most expensive thing that I have ever bought, and these guys were there helping me every step of the way. Bonus is, these guys are also located in Melb too, so having that extra face to face contact also does allay any fears or hesistation that you may have.

So yes, as Ait mentioned, either try some the for sale section in these forums, or give J-spec a call.

Be sure to tell us what you decide on in the end.

Cheers

My R32 GTSt was imported through SEI by the previous owner in march this year. Went well for him, but what he paid was pretty high. But then again the car is in really good condition.

Ive been to SEI a few times and none of the cars there look like they are worth $17900, except maybe the yellow GTSt with the GTR kit. (if thats still there) But it was for sale for $24k or something. All the cars at SEI that ive seen look rough, stereos missing, tears in interior, and even ciggie butts in the ashtrays still!!

But no one can comply R32s at the moment so unless u want to wait buying one here is the only option. I think $14000 to $17000 is a good price for the right car.

who would want to get a R33 for $16k, when u can get an R32 for the same price!! hehe

Thanks for the help guys, I have had a look at the Jspec and I have joined their emailing list... I probably wont make my purchase till early next year when they start hopefully importing r-32's again. I am doing a lot of search early on and making sure what options I have. ( u know how it is when ure exited about gettin a new car ect =) ) anyhow, Ill keep u guys posted and thanks again for the help. =)

B.

Good idea, hold off for a bit. I'm not a fan of dealers. They just usually add 4-5k on the price and sell the car they imported themselves. If you have the option to get a risbey, go for it I say just wait till next year and dig in. Much preferred option rather than a dealer.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've unfortunately never been as they're on the complete other side of the continent and another country that isn't currently letting us in as easily as they use to. I even heard their stop signs over there actually say "Stop" instead of "Arret". If I decided to trek the 48h drive, I wouldn't know when or where to stop haha. Whenever I order parts from UP Garage, I order from Japan as it's cheaper. Same with GKTech... oddly enough, it's cheaper shipped from Australia then it is the US.  UP Garage Japan operates their US leg though, unlike Tomei. If Tomei JPN had the power to close down Tomei USA, I'm sure it would be done in a day. They're two completely separate entities. Tomei JPN messed up somewhere originally agreeing to its creation and got sacked big time. 
    • I asked someone about this and he told me about the Audi 1.8T engine. But I think it would be difficult to swap
    • I don't know that machine specifically, but I'd personally go for something with a little more kick than 130amp. Around up to 180 would be good. At the 6mm range, you're really pushing the machine hard and don't have a long period you can run for with out needing to give it a rest. Lots of MIG machines come with a regulator and hose. A lot will come with a starter roll of wire too, but it isn't too expensive to buy. I'd recommend NOT buying a massive roll too, as you don't want it sitting around FOREVER in the machine between uses and potentially going to shit. For thin sheet metal, get a roll of 0.6mm if you're doing over 3mm and above, switch over to 0.8mm wire. Even by 2mm you'd probably really want to switch. As for gas battle, it's all swap and go style now. You'll pay a bottle deposit, and then X amount to swap for a full one. I think it's like $200 or $300 for a D Size bottle upfront as "deposit", and like $110 to $150 per swap. My D size CO2/argon bottle lasts a fair bit of welding on the MIG. And I run an E size bottle on the TIG. For DIY MIG, stick with a D size bottle. If you really start to get into a LOT of welding and doing it really regularly, then upgrade. If you're like most DIY car guys, one D bottle will last you 2 or 3 years easily. I think I've been on my current bottle about 5 years. It is starting to get low, but I've been smashing it a lot more the last 6 months.
    • SR20s came with cars like the Bluebird and Primera, but the RB20 never came. The ones in Turkey were either brought in specially or from abroad. That's why RBs aren't as common as SRs. And if a part breaks or I need to replace it when doing maintenance, it's harder to find parts for RBs.
    • I would suggest equally difficult to find, perhaps edging to the SR. Turkey has almost exclusively Euro market cars, some Korean, few Japanese other than pedestrian shite. I guess they're probably losing the fight against Chinese shit like we are now too. I would vote for a BMW V8, found in a 540i in a wrecking yard somewhere in Deutschland (or possibly Albania).
×
×
  • Create New...