Jump to content
SAU Community

Recommended Posts

Hi All,

I'm doubting I'll get much interest in this kind of vehicle on this site, but I thought I'd try just in case!

Ideally, I'm looking for swaps for any of the following:

S14 S2 200sx

S2 Stagea

Or the right R33 (again, must be S2)

So if you've got any of those and you're interested, give me a yell!!

1997 EL Falcon Futura sedan

-Red in colour

-Grey interior

-Auto

-ABS (have pulled fuse for more predictable on the brakes spooling/burnouts)

-Cruise control - still there and working, just need a factory bracket to hold the cable to the rocker cover.

-Tinted windows

-Power front windows, Remote central locking etc

The car itself is in tidy, clean condition. It's not perfect, but that's all part of the sleeper theme. Has the usual scratches and dints that you'd expect for a 12 year old car, but the paint is quite shiny.

Interior is good condition. Only modification in the interior is a boost gauge under the ashtray, which is fairly discreet.

Mechanically it has a freshly rebuilt bottom end and head, has prepped rods, ARP stud kit and a few other touches that I can't quite remember. These engines, even in standard form, tuned correctly are known to hang together with big power.

6Boost exhaust manifold,

50mm wastegate,

T04Z spec turbo with a beanie.

Bleed valve to adjust the boost.

3" mandrel bent exhaust from the turbo back. The tip is even squashed oval just like the factory one, so you can't tell is has an exhaust. It's fairly quiet too.

600x300x75 cooler. This is currently unpainted, but as it sits very neatly inside the standard bar, it's not particularly noticeable. I do have the factory mesh to put back in front of it though, and I was planning to spray the cooler matt black.

The piping under the bonnet has been painted black to look as standard as possible.

Fuelling consists of:

GRA LPG setup consisting of an S480 throttle body, twin B2 converters, twin lines all the way to the tank and "hi flow" lock offs.

The petrol system is still present and working. It runs very well on petrol, but as it's the standard pump, injectors etc you can only cruise off boost. It's still very handy for when you run out of gas, or can't be stuffed filling up!

This car is cheap as to run, and costs me less than $10 per 100km to run!

Ignition:

Crane Hi-6 MSD Ignition and LX92 coil. I've mounted the Hi-6 setup inside the passenger kick panel to keep it dry and safe.

ICE 9mm Race leads

Custom tuned ignition map via a J3 chip in the factory ECU. Map sensor has been modified to bypass boost.

Auto has been rebuilt with extra clutches and has a mechanical shiftkit, which is not too firm to be a pig to live with. Currently has the standard stall. I do have a 3000rpm converter, but I haven't got around to putting it in yet.

Diff is the standard 3.08 ratio (excellent for loading up the turbo and helping it spool early) with a mini-spool.

Suspension is stock as a rock all round, which helps it hook up well.

The entire build is less than 6000kms and 6 months old! I'm only looking to sell as I hardly use it, and I would like to get myself back into a Nissan turbo.

The car is currently putting out 303rwkw. There is room for more though, and while it has plenty of fuel and spark to keep going, it needs better intercooling to go further. There is half a water injection setup already in the engine bay.

Overall, the car is a massive sleeper and given the standard ride height, standard hubcaps, stock looking exhaust, cooler behind the bumper etc, it has never had a 2nd glance from the police.

Thanks,

Justin.

d4bc_1-1.jpg

d754_1-1.jpg

18052009583.jpg

7b22_1.jpg

7863_1-1.jpg

d239_1.jpg

e23e_1.jpg

e7c4_1.jpg

hey mate impressive car

would you be interested in a swap for my Black r34 coupe, if you search my threads u will find it..

let me know via pm if u are

Update!

Finally got around to spraying the cooler matt black today, and I also put the standard mesh back in front of the cooler.

Now there is nothing that gives the car away!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The MX5 has had some annoying rattles in both front doors over bumps So I installed fancy pants door bushings, which stopped all of the rattles with the windows up, but........with the windows down there was still rattles, so after some googling,  and a chat with MX5 Mania, I got some new door to glass weather seals, all the rattles, windows up, or down, are gone now Shout out to MX5 Mania, the weather seals were on sale, and when I head to Dural to pick the up they even fitted them for me for free I did see a "really" nice Blue NA sitting out front   and this Black NC PRHT that looked like it has sat in the sun for its whole life and never had a wash, the clear coat was non-existent, an it looked horrible, really horrible, but, it had a nice turbo kit with over 200kw, the thing went like a cut snake, bagging the rears through the gears and dosing like a champ 😍 But, as I've always stated, I am keeping my NC na, I'm happy with the current power the car makes In other news: MX5 Mania do a drive in drive out turbo kit, the only minor additional part recommended for boosting my car, as it sits now, is a oil cooler, and that bonnet vents are definitely required for track use Aftermarket version look a bit to "racecar" spec I wonder how Focus RS bonnet vents would look?????
    • Paint is only structural when applied to the outside of Chinese and Indian cars. Otherwise it should never be present between mechanical joints that were intended to be metal to metal. Pain slips, slides, cracks, compresses, and add thickness that wasn't intended to be there. It comes firmly under the category of "just no".
    • appreciated it thanks   There are threads on the adaptor. I rear re anodising but didn’t know it will reduce strength   re mating services needing to be flat/ not painted, why would that be? I am devastated as car been off for a year, fixed power steering then installed bm57 master cylinder and just before driving it this came up. So annoyed   worried and afraid to drive it, no fun caliper coming off    
    • Just report the OP (via the 3 dots menu at the top right of post) and request deletion.
    • And boosters can be rebuilt by the same sort of brake shops that will rebuild a brake booster.
×
×
  • Create New...