Jump to content
SAU Community

Anyone Wrecking An M35 Or Importing Parts?

Brendan Diss
 Share

Recommended Posts

Brendan Diss Explorer

Brendan Diss

Posted
Posted

Hi everybody,

A while ago I took out one of my mirrors on a pole I didn't see, and I am chasing the left hand wing mirror cover to replace my damaged one. I don't need the motors, glass or light, just the outer cover. Nissan will not sell me just the outer cover and they want $560 + GST for the entire mirror. Can anyone help?

Thanks very much,

Brendan Diss

zei20l Grand Master

zei20l

Posted
Posted

yup, i can.

ill have a pair of silver mirrors complete and working in about 2 weeks if you can wait that long? id probably sell you a whole one for $100 + shipping. id love to part it up, but ive done that before and still have bits of an S13 mirror at home from 10 years ago :(

OR, get a pair of mirror covers with indicators from IM. set you back a bit more, but they look really good!

also, i V35 mirrors are the same and will fit!

feel free to PM me if you like.

iamhe77 Grand Master

iamhe77

Posted
Posted (edited)

+1 on finding a wreck.

I may need a passenger side rear lower suspension arm (what the bottom of the damper is bolted to)

post-31842-1249952407_thumb.jpg

I was actually just after the bush, but it comes as an "all-in-one" unit.

*sigh* As you can see from Parts Master at the bottom of the image, it is just another part that is specific to the M35

Any wrecks around?

I have not yet contact Nissan requesting a price (my wallet shudders each and every time!).

Edited by iamhe77
zei20l Grand Master

zei20l

Posted
Posted

they cant push the bush out?? aftermarket??

i rekon there will be a generic sized one that will fit, or something from a V35/Z33. nissan wouldnt change all that much, it would cost too much to manufacture a small volume for M35s (then again there are a shit load of them around in japan im told)

Angus Smart Grand Master

Angus Smart

Posted
Posted

is this dew to that creaking sound you hear with the m35 while going up driveways etc?

i've also got a bad vibration occasionally on breaking. it doesnt happen all the time so i can cancel out brake rotors

iamhe77 Grand Master

iamhe77

Posted
Posted
is this dew to that creaking sound you hear with the m35 while going up driveways etc?

i've also got a bad vibration occasionally on breaking. it doesnt happen all the time so i can cancel out brake rotors

Nah, it is because the bolt is seized in the lower shock mount bush (the nut can be taken off, but the bolt will not come out).

I don't think it has anything to do with the creaking, I would put that down to the front shocks.

I had my Nismo suspension (with the exception of LHR damper) installed and the creaks have completely disappeared.

Angus Smart Grand Master

Angus Smart

Posted
Posted

yeah the tein's sometimes creak apparently? i'm not entirely sure. i thought maybe it was a sway bar still waiting on the Gb to happen for them tho..

must try find this shudder, scary when driving on the snowy roads and it does this.

iamhe77 Grand Master

iamhe77

Posted
Posted (edited)
yeah the tein's sometimes creak apparently? i'm not entirely sure. i thought maybe it was a sway bar still waiting on the Gb to happen for them tho..

must try find this shudder, scary when driving on the snowy roads and it does this.

Is it when you are at less than ~15kph? In snow mode??

Mine sometimes did this when reversing, but I have replicated it in the above conditions.

Get a transmission service... with either Nissan's Matic J AND their transmission additive satchel, or another fully synthetic, high quality fluid (such as Redline, Motul etc).

Should clear it up.

Edited by iamhe77
Angus Smart Grand Master

Angus Smart

Posted
Posted

nar its defiantly got something to do with the steering/suspension arms/bushes etc..

in normal driving conditions. but only happens every now and then. can be cold, can be hot can be as soon as i get in the car, can be after a while.

on the topic now on tranny.. transmax z good to put in? and what was in this satchel?

pixel8r Mentor

pixel8r

Posted
Posted (edited)

The V35 & 350Z manuals (same auto trans as M35 stagea) say over and over to only use Nissan Matic J fluid. It says other fluids may deteriorate components over time...

I realise nissan aren't going to recommend other brands though...

I recently had my gearbox serviced, and the workshop used the Nissan Matic J because its all they had (not that there's anything wrong with it - I'd say its up there with anything else), but apparently Castrol do a Transmax E which would've been the one to use (according to the workshop). Dont quote me though.

Edited by pixel8r
Angus Smart Grand Master

Angus Smart

Posted
Posted

well i think nissan say use matic j in the getrag for 34 also.. which i have in my 32..

but i was told transmax z was the best oil for the job. does both transfer and manual gearcase..

i just have some at home so was considering using it in the stagea..

zei20l Grand Master

zei20l

Posted
Posted
I... with either Nissan's Matic J AND their transmission additive satchel ....

does anyone know about this satchel? the nissan dealer i went to told me i was stupid for suggesting that. and that nissan dont do that, it must be some aftermarket thing that a dealer put in for the customer......

iamhe77 Grand Master

iamhe77

Posted
Posted
does anyone know about this satchel? the nissan dealer i went to told me i was stupid for suggesting that. and that nissan dont do that, it must be some aftermarket thing that a dealer put in for the customer......

Dunno what is in it, but all new auto Nissan's have it put into their transmissions.

Anyone else is not supposed to have it included in a service, it was just that the guys wanted to put it in when they serviced my trans last year.

I would imagine it is a combination of synthetic additives.

Certainly made a difference in mine!

They did tell me that t was from some company in the US and was designed specifically for Nissan for Nissan transmissions.

For some reason, it can be had for $30 if your dealership is friendly towards we "fringe dwellers" with our "underworld-roaming" cars.

pixel8r Mentor

pixel8r

Posted
Posted

out of interest i just looked this up.

http://www.tds.castrol.com.au/pdf%5C9070_T...828_2008_12.pdf

its specifically for japanese built transmissions and the pdf also says it is an alternative to nissan matic j.

The transmax z is probably fine too, but from the sounds of it this one is better? dunno.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Lithium
      R32 GTS-t RB30 sedan

      By Lithium · Posted

      To be fair passengers who aren't silly and have been in proper fast cars have often been pretty impressed once you hit 4th gear   
    • Lithium
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By Lithium · Posted

      Outstanding!
    • BaronOBeefdip
      Baron's R34 GT-R build thread - car in Japan for 5 years -_-

      By BaronOBeefdip · Posted

      I suppose that's true. Barring almost any situation, I'll never sell so what the market does is kind of irrelevant to me. It's possible I'd make most of my money back. That spreadsheet I mentioned? Maybe I could make back more than what the car's total costs thus far are, but the parts and all that is possibly a different story... Thanks for reading. It was certainly a good moment and just makes the ties to the car that much stronger. It's exciting that the option will be there to bring it over, however I have some plans with a shop that may end up keeping the car there longer, not sure. Coupled with the fact I want to move there and haven't solidified any path yet. So in a way, it feels like I'm in a limbo state that is uncertain; time will tell.
    • TurboTapin
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By TurboTapin · Posted

      No worries, everything worked out in the end. I just wanted to make the point that it doesn't matter where it comes from (I.E Australia), it can be broken or improperly built. I would still purchase from these companies in the future. B2R - Not certain how that finished, this was on a car I wired a few things and street tuned. I know the owner ended up shipping the motor back to Australia for investigation. Hopefully some of it is covered under warranty.  Turbosmart - I always pressure test everything that goes on my car. It's a habit from my career in oil and gas. I run two 40mm's and both had major leaks from the actuator to exhaust portion through the shaft. I returned both, they shipped me back two and one was leaking and the other had a 38mm top (40mm gate with 38mm actuator cap, no idea how that happens). Eventually after a lot of back and forth I found myself with two non-leaking gates. I believe this happens a lot more then people would like to believe but you would never know if you don't pressure test them prior to installation. Crank Motorsport - Issued a full refund and let me keep the seat rails. I turned them into scrap metal for other projects. GKTech - Shipped me out a replacement and asked that I modify it as per my idea and that they would do the same for a future revision. ATP - Can just needed a large shim to bolt up properly.  Haltech - They started an actual proper Beta channel for firmware's a few months back and stopped using the general public for testing. I'm now much happier.  Speedtek - f**k Speedtek. I would love to watch them burn.     
    • Murray_Calavera
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By Murray_Calavera · Posted

      I've got a Turbosmart wastegate, ATP catch can, many GK Tech parts and Haltech everything. Everything's been perfect, sorry to hear your experience wasn't the same
×
×
  • Create New...